"Emerson" markasına ait modeller;
Quantity- 8 ea.
Sensor Body Material- AISI 316 Stainless Steel
Data Collection Interval- 10 - 10000 Hz as minimum
Sensitivity- 100 mV/g
Integrated Cable- Yes, with suitable connector matches to Emerson AMS 2140 Machinery Health Analyzer Ports
Integrated Cable Length-15 meters (HOLD)
Signal Output- Suitable to Emerson AMS 2140 Machinery Health Analyzer Inputs
Area Classification- Zone 1&2 IIC T6 according to IEC 60079
Explosion proof E(ex) d+ia IIC T6 ATEX II 2G
------------------------------
Ingress Protection- IP 67 as per IEC 60529
Quantity- 2 ea.
Enclosure Material-AISI 304 Stainless Steel
Dimensions- 300(H) x 300(W) x 150(D) mm
Cover Type- Hinged with Key-Lock
Removable Gland Plate- Required, at bottom side
Area Classification- Not Applicable
Ingress Protection- IP 67 as per IEC 60529
----------------
Requirements:	Vibration Sensors shall be 
Accelerometer-type;
packed in AISI 316 Stainless Steel Body, threaded connection to equipment and shall have integrated cable with end connector suitable to ports of Emerson AMS 2140 Machinery Health Analyzer;
compatible to the Input Specifications of Emerson AMS 2140 Machinery Health Analyzer (Refer to Attchment.1), from electronic points of view.
Instrument enclosure shall be IP 67 (as minimum) as per IEC-60529.
RFI/EMI protection shall be provided.
Vendor is requested to quote Single-Axis and 3-Axis Sensors Seperately.

Environmental:	Vibration Sensors shall be suitable to -20°C … +70°C ambient temperature.

Hazardous Area
Classification:	Vibration Sensors shall be certified suitable for the relevant hazardous area classified as:
-	Zone 1&2 IIC T6 according to IEC 60079; 
-	Explosion proof E(ex) d+ia IIC T6 ATEX II 2G according to ATEX/CENELEC.

Wiring:	Vibration Sensors shall have integrated cable with end-connector suitable to ports of Emerson AMS 2140 Machinery Health Analyzer. 


Performance:	Minimum daha collection range shall be 10 - 10000 Hz. Sensitivity shall be 100 mV/g as minimum.

Materials:	Body Materials shall be AISI 316 Stainless Steel as minimum.
Material shall be suitable for meteorological data.
----------
Vibration Sensors shall be supplied as a single assembly as Body, Internal Electronics, Cables, Cable Connectors other required components already workshop calibrated and ready to install and electrical connection.
Accelerometer/ Vibration Sensors

Emerson
Quantity- 8 ea. Sensor Body Material- AISI 316 Stainless Steel Data Collection Interval- 10 - 10000 Hz as minimum Sensitivity- 100 mV/g Integrated Cable- Yes, with suitable connector matches to Emerson AMS 2140 Machinery Health Analyzer Ports Integrated Cable Length-15 meters (HOLD) Signal Output- Suitable to Emerson AMS 2140 Machinery Health Analyzer Inputs Area Classification- Zone 1&2 IIC T6 according to IEC 60079 Explosion proof E(ex) d+ia IIC T6 ATEX II 2G ------------------------------ Ingress Protection- IP 67 as per IEC 60529 Quantity- 2 ea. Enclosure Material-AISI 304 Stainless Steel Dimensions- 300(H) x 300(W) x 150(D) mm Cover Type- Hinged with Key-Lock Removable Gland Plate- Required, at bottom side Area Classification- Not Applicable Ingress Protection- IP 67 as per IEC 60529 ---------------- Requirements: Vibration Sensors shall be Accelerometer-type; packed in AISI 316 Stainless Steel Body, threaded connection to equipment and shall have integrated cable with end connector suitable to ports of Emerson AMS 2140 Machinery Health Analyzer; compatible to the Input Specifications of Emerson AMS 2140 Machinery Health Analyzer (Refer to Attchment.1), from electronic points of view. Instrument enclosure shall be IP 67 (as minimum) as per IEC-60529. RFI/EMI protection shall be provided. Vendor is requested to quote Single-Axis and 3-Axis Sensors Seperately. Environmental: Vibration Sensors shall be suitable to -20°C … +70°C ambient temperature. Hazardous Area Classification: Vibration Sensors shall be certified suitable for the relevant hazardous area classified as: - Zone 1&2 IIC T6 according to IEC 60079; - Explosion proof E(ex) d+ia IIC T6 ATEX II 2G according to ATEX/CENELEC. Wiring: Vibration Sensors shall have integrated cable with end-connector suitable to ports of Emerson AMS 2140 Machinery Health Analyzer. Performance: Minimum daha collection range shall be 10 - 10000 Hz. Sensitivity shall be 100 mV/g as minimum. Materials: Body Materials shall be AISI 316 Stainless Steel as minimum. Material shall be suitable for meteorological data. ---------- Vibration Sensors shall be supplied as a single assembly as Body, Internal Electronics, Cables, Cable Connectors other required components already workshop calibrated and ready to install and electrical connection.