NRA 1-3e (alternative for pos 2)

GESTRA test station for permanent Condensate monitoring Monitoring for steam loss and Condensate build-up Housing design for panel mounting Supply voltage 230 VAC 16 inputs for measuring electrodes with built-in Temperature sensor PT 1000 or optionally for measuring electrodes without temperature sensor 1 input for temperature sensor PT 100 for measuring the system temperature 1 output collective alarm Display via 3-digit 7-segment display as well as 3 status LEDs Control button on the front 7 different operating modes for Processing of measured values - Condensate accumulation monitoring optionally by Temperature sensor or instantaneous by measuring electrode - suitable for all condensate drain systems, manufacturer-independent - automatic limit value setting - Limit values can be set individually - automatic operational detection to avoid it of false alarms when starting and stopping - alarm history

VKE 16-1 PN 40

GESTRA test chamber to the GESTRA test device for VKE condensate drain systems. Electrode connection either right or left. For horizontal lines. Materials: Housing: GS-C25 (1.0619) Flanges: C22.8 (1.0460) Electrode: stainless steel Connection: flanges EN 1092 form B1 DN 15

Lrgt 16-2 Pn 40

Cat. 3773149 LRGT 16-2 PN 40 GESTRA - Conductivity compact electrode G 1 " Electrode length: 500 mm Four electrode system with integrated transmitter and resistance thermometer PT1000 Output: 4 ... 20 mA Power connection: 24 V DC 4-wire circuit Protection class: IP 65 preferred Measuring range: 100-10000 myS / cm

VKE 16-1 PN 40 dn25 (Alternative for pos4)

GESTRA test chamber to the GESTRA test device for VKE condensate drain systems. Electrode connection either right or left. For horizontal lines. Materials: Housing: GS-C25 (1.0619) Flanges: C22.8 (1.0460) Electrode: stainless steel Connection: flanges EN 1092 form B1 DN 25

01503210

Order No. 2661644 Blowdown controller type KS 90-1 Degree of protection: front IP 65 Housing IP 20 Display: 4-digit. Actual and setpoint display 4 LED yellow for status display for alarm 1,2 and valve open, too Input 1: standard signal 0 / 4-20 mA Output: 4 relays as potential-free change-over contacts configured: as a three-step controller and 1 each Max alarm and Min alarm Power supply: 90 to 250 V, AC 24 V, AC optional

00377722

Rk44 Pn16 Dn65

215086150

Mk 45-2 Dn20 Pn40

SPECTOR NRGT 26-1/26-1s