"Ametek" markasına ait modeller;
ANNUNCIATOR 10ALARM 120VAC 50/60HZ 0.2AMP
910ac120kc120h1

Ametek
ANNUNCIATOR 10ALARM 120VAC 50/60HZ 0.2AMP
AMETEK JOFRA Dry Block Temperature Calibrator Temperature range: maximum 155°C : minimum -25°C @ 23°C (-39°C @ 0°C, -7°C @ 50°C) Temperature stability: ± 0.04°C Accuracy: ± 0.3°C (relative to internal reference) Radial homogeneity: ± 0.03°C Display resolution: 0.01°C, 0.1°C or 1°C Immersion depth: 120 mm Shaft diameter: 26 mm Temperature setting: manual, either directly or via 3 predefined values : automatically up to 12 checkpoints with holding time Heating: 13 min from 23°C to 155°C Cooling: 12 min at 155°C to 23°C, 16 min at 23°C to -25°C Switch test: Automatic / open, closed, hysteresis : up to 3 automatic repetitions Connection voltage: 180…254 VAC / 47-53 Hz (others on request) Maximum power consumption: 100 VA Protection class: IP10 Operating range: 0 … 50°C, 5…90% RH non-condensing Dimensions: (L x W x H) 248 x 148 x 305 mm Weight: 5.5 kg (without case) / 9 kg (with case) Other features: large color display, easy operation IRI – intelligent status information for recalibration : Quiet mode selectable MVI - Temperature stability during grid fluctuations USB interface : online firmware update including: power cord User manual (English) USB interface cable JOFRACAL calibration software Calibration certificate traceable to international standards for temperature
CTC-155 A

Ametek
AMETEK JOFRA Dry Block Temperature Calibrator Temperature range: maximum 155°C : minimum -25°C @ 23°C (-39°C @ 0°C, -7°C @ 50°C) Temperature stability: ± 0.04°C Accuracy: ± 0.3°C (relative to internal reference) Radial homogeneity: ± 0.03°C Display resolution: 0.01°C, 0.1°C or 1°C Immersion depth: 120 mm Shaft diameter: 26 mm Temperature setting: manual, either directly or via 3 predefined values : automatically up to 12 checkpoints with holding time Heating: 13 min from 23°C to 155°C Cooling: 12 min at 155°C to 23°C, 16 min at 23°C to -25°C Switch test: Automatic / open, closed, hysteresis : up to 3 automatic repetitions Connection voltage: 180…254 VAC / 47-53 Hz (others on request) Maximum power consumption: 100 VA Protection class: IP10 Operating range: 0 … 50°C, 5…90% RH non-condensing Dimensions: (L x W x H) 248 x 148 x 305 mm Weight: 5.5 kg (without case) / 9 kg (with case) Other features: large color display, easy operation IRI – intelligent status information for recalibration : Quiet mode selectable MVI - Temperature stability during grid fluctuations USB interface : online firmware update including: power cord User manual (English) USB interface cable JOFRACAL calibration software Calibration certificate traceable to international standards for temperature
AMETEK JOFRA Dry Block Temperature Calibrator RTCt-157 B Item No.: AD-RTCt-157B Temperature range: Maximum: 155 °C Minimum @ ambient 0°C: -57°C Minimum @ ambient temperature 23 °C: -45 °C Minimum @ ambient temperature 40 °C: -31 °C Temperature stability: +/- 0.005 °C Accuracy relative to Internal reference: +/- 0.11°C External reference: +/- 0.040 – 0.065 °C (using external reference sensor) Display resolution: 0.001, 0.01 °C; 0.1°C or 1°C Immersion depth: 160 mm Bore diameter: 30 mm Automatic step function: up to 20 steps Connection voltage: 230 V/45-65 Hz (other connection voltages possible) Maximum power consumption: 400W Protection class: IP10 Dimensions without case: (L x W x H) 362 x 171 x 363 mm Dimensions with case: (L x W x H) 650 x 380 x 500 mm Weight without case: 10.5 kg Weight with optional case: approx. 15.5kg Various features: Dual zone heating/cooling unit Easy to use Touch Screen Our Interface - Color Display Stabilization indicator "Calibrator is stable" output (SYNC) Wi-Fi, Ethernet & USB interface Input for RTD, TC, V, mA 4 – 20 mA transmitter input incl. 24 VDC sensor power supply Input for external reference sensor Input for DLC sensor Downloading work orders from the PC Included in the delivery are: JOFRA RTCt dry block temperature calibrator DANAK calibration certificate – Accredited Certificate – ISO17025 Tool for insert sleeve power cord 1 set of rubber stoppers for insulating plugs User manual USB interface cable Wi-Fi dongle JOFRACAL calibration software Test cable set (2x red and 2x black)
AD-RTCt-157B

Ametek
AMETEK JOFRA Dry Block Temperature Calibrator RTCt-157 B Item No.: AD-RTCt-157B Temperature range: Maximum: 155 °C Minimum @ ambient 0°C: -57°C Minimum @ ambient temperature 23 °C: -45 °C Minimum @ ambient temperature 40 °C: -31 °C Temperature stability: +/- 0.005 °C Accuracy relative to Internal reference: +/- 0.11°C External reference: +/- 0.040 – 0.065 °C (using external reference sensor) Display resolution: 0.001, 0.01 °C; 0.1°C or 1°C Immersion depth: 160 mm Bore diameter: 30 mm Automatic step function: up to 20 steps Connection voltage: 230 V/45-65 Hz (other connection voltages possible) Maximum power consumption: 400W Protection class: IP10 Dimensions without case: (L x W x H) 362 x 171 x 363 mm Dimensions with case: (L x W x H) 650 x 380 x 500 mm Weight without case: 10.5 kg Weight with optional case: approx. 15.5kg Various features: Dual zone heating/cooling unit Easy to use Touch Screen Our Interface - Color Display Stabilization indicator "Calibrator is stable" output (SYNC) Wi-Fi, Ethernet & USB interface Input for RTD, TC, V, mA 4 – 20 mA transmitter input incl. 24 VDC sensor power supply Input for external reference sensor Input for DLC sensor Downloading work orders from the PC Included in the delivery are: JOFRA RTCt dry block temperature calibrator DANAK calibration certificate – Accredited Certificate – ISO17025 Tool for insert sleeve power cord 1 set of rubber stoppers for insulating plugs User manual USB interface cable Wi-Fi dongle JOFRACAL calibration software Test cable set (2x red and 2x black)
AMETEK JOFRA Dry Block Temperature Calibrator RTC-156 B Temperature range: Maximum: 155 °C Minimum @ ambient temperature 0°C: -46°C Minimum @ ambient temperature 23 °C: -30 °C Minimum @ ambient temperature 40 °C: -15 °C Temperature stability: +/- 0.005 °C Accuracy relative to Internal reference: +/- 0.10 °C External reference: +/- 0.04 °C (using external reference sensor) Display resolution: 0.001, 0.01 °C; 0.1°C or 1°C Immersion depth: 160 mm Bore diameter: 30 mm Automatic step function: up to 20 steps Connection voltage: 230 V/45-65 Hz (other connection voltages possible) Maximum power consumption: 400W Protection class: IP10 Dimensions without case: (L x W x H) 362 x 171 x 363 mm Dimensions with case: (L x W x H) 650 x 380 x 500 mm Weight without case: 10.5 kg Weight with optional case: approx. 15.5kg Various features: Dual-zone heating/cooling unit Easy to use Color display (5.7") Stabilization indicator "Calibrator is stable" output (SYNC) USB interface and calibration software LAN port, SD card slot Input for RTD, TC, V, mA 4 – 20 mA transmitter input incl. 24 VDC sensor power supply Input for external reference sensor Input for DLC sensor Downloading work orders from the PC Included in the delivery are: JOFRA RTC dry block temperature calibrator DANAK calibration certificate – Accredited Certificate – ISO17025 Tool for insert sleeve power cord 1 set of rubber stoppers for insulating plugs User manual USB interface cable JOFRACAL calibration software Test cable set (2x red and 2x black)
AD-RTC-156B

Ametek
AMETEK JOFRA Dry Block Temperature Calibrator RTC-156 B Temperature range: Maximum: 155 °C Minimum @ ambient temperature 0°C: -46°C Minimum @ ambient temperature 23 °C: -30 °C Minimum @ ambient temperature 40 °C: -15 °C Temperature stability: +/- 0.005 °C Accuracy relative to Internal reference: +/- 0.10 °C External reference: +/- 0.04 °C (using external reference sensor) Display resolution: 0.001, 0.01 °C; 0.1°C or 1°C Immersion depth: 160 mm Bore diameter: 30 mm Automatic step function: up to 20 steps Connection voltage: 230 V/45-65 Hz (other connection voltages possible) Maximum power consumption: 400W Protection class: IP10 Dimensions without case: (L x W x H) 362 x 171 x 363 mm Dimensions with case: (L x W x H) 650 x 380 x 500 mm Weight without case: 10.5 kg Weight with optional case: approx. 15.5kg Various features: Dual-zone heating/cooling unit Easy to use Color display (5.7") Stabilization indicator "Calibrator is stable" output (SYNC) USB interface and calibration software LAN port, SD card slot Input for RTD, TC, V, mA 4 – 20 mA transmitter input incl. 24 VDC sensor power supply Input for external reference sensor Input for DLC sensor Downloading work orders from the PC Included in the delivery are: JOFRA RTC dry block temperature calibrator DANAK calibration certificate – Accredited Certificate – ISO17025 Tool for insert sleeve power cord 1 set of rubber stoppers for insulating plugs User manual USB interface cable JOFRACAL calibration software Test cable set (2x red and 2x black)
Aluminum carrying case with trolley
CT

Ametek
Aluminum carrying case with trolley
Aluminum carrying case
AD-124094

Ametek
Aluminum carrying case
AD-RTC-156B Temperature range: Maximum : 155 °C minimum @ Ambient 0°C : -46°C minimum @ Ambient 23°C : -30°C minimum @ Ambient 40°C : -15°C Temperature Stability : +/- 0.005°C Accuracy related to internal reference : +/- 0.10 °C external reference : +/- 0.04 °C (using ex. reference sensor) Display resolution : 0.001, 0.01 °C; 0.1°C or 1°C Immersion depth : 160 mm Bore diameter : 30 mm Auto step function : up to 20 steps Connection voltage: 230 V/45-65 Hz (other connection voltage possible) Connected load max.: 400 W Protection class : IP10 Dimensions without case : (L x W x H) 362 x 171 x 363 mm Dimensions with case: (L x W x H) 650 x 380 x 500 mm Weight without case : 10.5 kg weight with opt. Suitcase : approx. 15.5 kg Various features: Two-zone heating/cooling block Easy handling Color display (5.7") stabilization indicator "Calibrator is stable" output (SYNC) USB interface and calibration software LAN connection, input for SD card Input for RTD, TC, V, mA 4 – 20 mA transmitter input incl. 24 VDC encoder power supply Input for external reference sensor Input for DLC sensor Download work orders from PC the scope of delivery includes: Dry block temperature calibrator JOFRA RTC Traceable calibration certificate to international standards for temperature Traceable calibration certificate according to international standards for the input variables Tool for insert sleeve power cord 1 set of rubber plugs for insulating plugs User Guide USB interface cable Calibration software JOFRACAL Test cable set (2x red and 2x black)
JOFRA dry block temperature calibrator RTC-156 B

Ametek
AD-RTC-156B Temperature range: Maximum : 155 °C minimum @ Ambient 0°C : -46°C minimum @ Ambient 23°C : -30°C minimum @ Ambient 40°C : -15°C Temperature Stability : +/- 0.005°C Accuracy related to internal reference : +/- 0.10 °C external reference : +/- 0.04 °C (using ex. reference sensor) Display resolution : 0.001, 0.01 °C; 0.1°C or 1°C Immersion depth : 160 mm Bore diameter : 30 mm Auto step function : up to 20 steps Connection voltage: 230 V/45-65 Hz (other connection voltage possible) Connected load max.: 400 W Protection class : IP10 Dimensions without case : (L x W x H) 362 x 171 x 363 mm Dimensions with case: (L x W x H) 650 x 380 x 500 mm Weight without case : 10.5 kg weight with opt. Suitcase : approx. 15.5 kg Various features: Two-zone heating/cooling block Easy handling Color display (5.7") stabilization indicator "Calibrator is stable" output (SYNC) USB interface and calibration software LAN connection, input for SD card Input for RTD, TC, V, mA 4 – 20 mA transmitter input incl. 24 VDC encoder power supply Input for external reference sensor Input for DLC sensor Download work orders from PC the scope of delivery includes: Dry block temperature calibrator JOFRA RTC Traceable calibration certificate to international standards for temperature Traceable calibration certificate according to international standards for the input variables Tool for insert sleeve power cord 1 set of rubber plugs for insulating plugs User Guide USB interface cable Calibration software JOFRACAL Test cable set (2x red and 2x black)

75W, 115V, HEATER/THERMOCOUPLE ASSEMBLY FOR 36" PROBE
73052TE

Ametek
75W, 115V, HEATER/THERMOCOUPLE ASSEMBLY FOR 36" PROBE
4-20mA Isolated Voltage/Current Transmitter 1302
Sc-1302

Ametek
4-20mA Isolated Voltage/Current Transmitter 1302
4-20mA Isolated Voltage/Current Transmitter 1302
Sc-1302-I

Ametek
4-20mA Isolated Voltage/Current Transmitter 1302
3050 SLR,DO,TE/5830 1 ppmv Nominal Moisture Generator
305540901S

Ametek
3050 SLR,DO,TE/5830 1 ppmv Nominal Moisture Generator
2500 PROGRAMMABLE LIMIT SWITCH RESOLVERS, INDUSTRIAL DUTY FOOT MOUNT RESOLVER
1986a1xrx

Ametek
2500 PROGRAMMABLE LIMIT SWITCH RESOLVERS, INDUSTRIAL DUTY FOOT MOUNT RESOLVER
24V DC Relay Module
50-Dcf3 24v Dc

Ametek
24V DC Relay Module
24V DC Relay Module
90-Ax1 24v Dc

Ametek
24V DC Relay Module
240 VAC, 50/60 HZ, 0 AC RELAYS, 4 DC RELAYS, NO OPTIONS
2500ea0a4dx

Ametek
240 VAC, 50/60 HZ, 0 AC RELAYS, 4 DC RELAYS, NO OPTIONS
2.5 inch 0-4000 PSI ¼ inch NPT
BU-2581-AQ

Ametek
2.5 inch 0-4000 PSI ¼ inch NPT
1x sample set, 1000 gray septa, 10 filters, 10 needles 0.8 x 16 mm
Consumable set CheckPoint 3

Ametek
1x sample set, 1000 gray septa, 10 filters, 10 needles 0.8 x 16 mm
120 VAC Input Module
1060-798

Ametek
120 VAC Input Module
(without replaceable load cell) including RS232 & USB connections including ForceTest software including test accessories and carrying case incl. battery adapter/charger including calibration certificate
Digital indicator model DFS2-R-ND

Ametek
(without replaceable load cell) including RS232 & USB connections including ForceTest software including test accessories and carrying case incl. battery adapter/charger including calibration certificate
(B & C models only), STS200A915EH Item No.: R2
STS-200 reference sensor - 4mm diameter, 161mm len

Ametek
(B & C models only), STS200A915EH Item No.: R2