"Amf" markasına ait modeller;
Catch screw size 20 Technical data: Thread: M12 Total length: 54 mm
303222--

Amf
Catch screw size 20 Technical data: Thread: M12 Total length: 54 mm
Vertical clamp 6803 size 3 Execution: Galvanized and passivated, with open holding arm and angle foot. more ergonomic, oil-resistant 2-component handle with a large palm rest. Safety clamp with finger protection and loss protection for the pressure screw. Including pressure screw M8x45 Technical specifications: Max holding force: 2.5 kN
90332

Amf
Vertical clamp 6803 size 3 Execution: Galvanized and passivated, with open holding arm and angle foot. more ergonomic, oil-resistant 2-component handle with a large palm rest. Safety clamp with finger protection and loss protection for the pressure screw. Including pressure screw M8x45 Technical specifications: Max holding force: 2.5 kN
Vertical clamp 6803 size 2 Execution: Galvanized and passivated, with open holding arm and angle foot. more ergonomic, oil-resistant 2-component handle with a large palm rest. Safety clamp with finger protection and loss protection for the pressure screw. Including pressure screw M6x35 Technical specifications: Max holding force: 1.2 kN
90324

Amf
Vertical clamp 6803 size 2 Execution: Galvanized and passivated, with open holding arm and angle foot. more ergonomic, oil-resistant 2-component handle with a large palm rest. Safety clamp with finger protection and loss protection for the pressure screw. Including pressure screw M6x35 Technical specifications: Max holding force: 1.2 kN
Vertical clamp 6800 size 2 Execution: Galvanized and passivated, with open holding arm and horizontal foot. Ergonomic, oil-resistant 2- Component handle with large hand rest. Safety clamp with finger protection and loss protection for the pressure screw. Including pressure screw M6x35 Technical specifications: Max holding force: 1.2 kN
90027

Amf
Vertical clamp 6800 size 2 Execution: Galvanized and passivated, with open holding arm and horizontal foot. Ergonomic, oil-resistant 2- Component handle with large hand rest. Safety clamp with finger protection and loss protection for the pressure screw. Including pressure screw M6x35 Technical specifications: Max holding force: 1.2 kN
Steel, tempered (350 + 80 HV30)
82909 Washers for clamping tools

Amf
Steel, tempered (350 + 80 HV30)
Size 20 catch screw Technical specifications: Thread: M12 Total length: 54mm
303222

Amf
Size 20 catch screw Technical specifications: Thread: M12 Total length: 54mm
Pressure screw with ball, serrated 7110DF Size 10
273177

Amf
Pressure screw with ball, serrated 7110DF Size 10
Horizontal clamp 6830 size 3 Execution: Galvanized and passivated, with open holding arm and horizontal foot. Ergonomic, oil-resistant 2- Component handle with large hand rest. Loss protection for the pressure screw. Including pressure screw M8x45 Technical specifications: Max holding force: 2.5 kN
93039

Amf
Horizontal clamp 6830 size 3 Execution: Galvanized and passivated, with open holding arm and horizontal foot. Ergonomic, oil-resistant 2- Component handle with large hand rest. Loss protection for the pressure screw. Including pressure screw M8x45 Technical specifications: Max holding force: 2.5 kN
DIN 6340-M24
Model-04862554

Amf
DIN 6340-M24
Clamping pin size 20 for M12 catch screw Execution: Size 20 zero point clamping bolt. Stainless steel, hardened.
303149

Amf
Clamping pin size 20 for M12 catch screw Execution: Size 20 zero point clamping bolt. Stainless steel, hardened.
Clamping pin size 20 for M12 catch screw Execution: Size 20 undersize pull-studs. Stainless steel, hardened.
303164

Amf
Clamping pin size 20 for M12 catch screw Execution: Size 20 undersize pull-studs. Stainless steel, hardened.
Clamping pin size 20 for M12 catch screw Execution: Size 20 sword tension bolt. Stainless steel, hardened
303156

Amf
Clamping pin size 20 for M12 catch screw Execution: Size 20 sword tension bolt. Stainless steel, hardened

Clamping module KP5.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel. When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 1.5 kN Holding force: 13 kN Repeatability < 0.005 mm Opening pneum.: min. 5 bar Connection: G1/8 Support surface: ø 78 mm Housing / height: ø 110 / 42 mm Sensors: inductive, plug S8 Cable length: 150mm
558051

Amf
Clamping module KP5.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel. When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 1.5 kN Holding force: 13 kN Repeatability < 0.005 mm Opening pneum.: min. 5 bar Connection: G1/8 Support surface: ø 78 mm Housing / height: ø 110 / 42 mm Sensors: inductive, plug S8 Cable length: 150mm
Clamping module KP20.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel. When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 17 kN Holding force: 55 kN Repeatability < 0.005 mm Opening pneum.: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, plug S8 Cable length: 150mm
552968

Amf
Clamping module KP20.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel. When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 17 kN Holding force: 55 kN Repeatability < 0.005 mm Opening pneum.: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, plug S8 Cable length: 150mm
Clamping module KP20.3, pneumatic with two inductive sensors for locking control Design: Clamping module: stainless steel with hardened piston, cover and support surface. Flange housing: stainless steel. When closed, the clamping module is positively and self-lockingly locked. The locking control is checked by inductive sensors, the open and closed state can be checked. Technical data: Pull-in and locking force: 17 kN Holding force: 55 kN Repeatability < 0.005 mm Opening pneumatic: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, S8 connector Cable length: 150 mm
552968

Amf
Clamping module KP20.3, pneumatic with two inductive sensors for locking control Design: Clamping module: stainless steel with hardened piston, cover and support surface. Flange housing: stainless steel. When closed, the clamping module is positively and self-lockingly locked. The locking control is checked by inductive sensors, the open and closed state can be checked. Technical data: Pull-in and locking force: 17 kN Holding force: 55 kN Repeatability < 0.005 mm Opening pneumatic: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, S8 connector Cable length: 150 mm
Clamping module KP20.3, pneumatic with two inductive sensors for locking control Execution: Clamping module: stainless steel with hardened piston, cover and bearing surface. Flange housing: stainless steel. When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors, es can the open and closed status are queried. Technical specifications: collection and Closing force: 17 kN Holding force: 55 kN Repeat accuracy < 0.005 mm Opening pneumatic: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, connector S8 Cable Length: 150mm
Order nr 552968

Amf
Clamping module KP20.3, pneumatic with two inductive sensors for locking control Execution: Clamping module: stainless steel with hardened piston, cover and bearing surface. Flange housing: stainless steel. When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors, es can the open and closed status are queried. Technical specifications: collection and Closing force: 17 kN Holding force: 55 kN Repeat accuracy < 0.005 mm Opening pneumatic: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, connector S8 Cable Length: 150mm
Clamping module KP10.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 8 kN Holding force: 25 kN Repeatability < 0.005 mm Opening pneum.: min. 5 bar Connection: G1/8 Support surface: ø 112 mm Housing / height: ø 142 / 48 mm Sensors: inductive, plug S8 Cable length: 150mm
552967

Amf
Clamping module KP10.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 8 kN Holding force: 25 kN Repeatability < 0.005 mm Opening pneum.: min. 5 bar Connection: G1/8 Support surface: ø 112 mm Housing / height: ø 142 / 48 mm Sensors: inductive, plug S8 Cable length: 150mm
Clamping module KP10.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 8 kN Holding force: 25 kN Repeatability < 0.005 mm Opening pneum.: min. 5 bar Connection: G1/8 Support surface: ø 112 mm Housing / height: ø 142 / 48 mm Sensors: inductive, plug S8 Cable length: 150mm
552967

Amf
Clamping module KP10.3, pneumatic with two inductive sensors Locking control Execution: Clamping module: stainless steel with hardened piston, lid and Support surface. Flange housing: stainless steel When closed, the clamping module is form-fitting and self-locking locked. The locking control is queried by inductive sensors can be opened and closed status can be queried. Technical data: collection and Closing force: 8 kN Holding force: 25 kN Repeatability < 0.005 mm Opening pneum.: min. 5 bar Connection: G1/8 Support surface: ø 112 mm Housing / height: ø 142 / 48 mm Sensors: inductive, plug S8 Cable length: 150mm
Clamping module K20.3, pneumatic with two inductive sensors locking control Execution: Clamping module: stainless steel with hardened piston, cover and bearing surface. Flange housing: stainless steel. The clamping module is in the closed state form-fitting and self-locking locked. The query of the locking control is done by inductive sensors, it can the open and closed status are queried. Technical specifications: collection and Closing force: 17 kN Holding force: 55 kN repeatability <0.005mm Opening pneumatic: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, connector S8 Cable Length: 150mm
552968

Amf
Clamping module K20.3, pneumatic with two inductive sensors locking control Execution: Clamping module: stainless steel with hardened piston, cover and bearing surface. Flange housing: stainless steel. The clamping module is in the closed state form-fitting and self-locking locked. The query of the locking control is done by inductive sensors, it can the open and closed status are queried. Technical specifications: collection and Closing force: 17 kN Holding force: 55 kN repeatability <0.005mm Opening pneumatic: min. 4.5 bar Connection: G1/8 Support surface: ø 138 mm Housing / height: ø 175 / 53 mm Sensors: inductive, connector S8 Cable Length: 150mm
Clamping bolt size 5 for catch screw M8 Execution: Zero point clamping bolt size 5. Stainless steel, hardened.
562192

Amf
Clamping bolt size 5 for catch screw M8 Execution: Zero point clamping bolt size 5. Stainless steel, hardened.