"Bollfilter" markasına ait modeller;
double filter Filter type : 2.04.5 Case Size (G.Q) : 110,260 Connection size : DN 50 Connection flanges according to : WN165, square flanges Dimension sheet : Z45540 --- OPERATING CONDITIONS --- fluid to be filtered : water Fluid group according to PED : 2 Fluid Type according to PED : Liquid Max flow rate : not specified Working pressure : not specified Maximum allowable pressure : 25.00 bar Operating temperature : not specified Permitted Operating temperature min : 1.00 °C Permitted Operating temperature max : 60.00 °C --- CONSTRUCTION/ACCEPTANCE --- Construction and design : PED2014/68/EU AD-2000 : Article 4, paragraph 3 Volume of the container 2x: 3.00 liters Curb weight : 36 kg Pressure test according to: Boll & Kirch with certificate --- Construction/Form Certificates --- FB-7-80 pressure test 3.1 : yes no material from : China and India --- MATERIALS --- Filter housing made of : EN-GJS-400-15, nickel-plated on the inside Type of diverter valve: plug valve diverter Material of the switching fitting: EN-GJS-400-15, nickel-plated on the inside Internal parts of the change-over fitting: EN-GJS-400-15, rubberized Lid seals made of : EPDM Circuit seals made of : EPDM --- FILTER ELEMENTS --- Element Type : Basket screen element Element material : CrNi steel Fabric made of : 1.4401 Fabric number : 80 Filter fineness: 150 μm Sieve area 2x: 529 cm² --- EQUIPMENT --- Attached differential pressure indicator: 4.46.2 (optical + electrical) Sealant differential pressure gauge : EPDM Differential pressure setting: cleaning 0.38bar/alarm 0.5bar counter flange. Screws and gaskets : included --- Accessories/connections --- Vent : with plug Emptying : with plug Counterflanges : with flat gasket --- Accessories/differential pressure measurement --- DDA : Readable opposite the flange side --- CORROSION PROTECTION --- Corrosion protection inside : nickel-plated --- Corrosion protection/special paint outside --- Attachments made of stainless steel: unpainted --- LABELLING --- Operating/factory plate: German/English Filters without CE marking :
2.04.5.110.260 DN 50

Bollfilter
double filter Filter type : 2.04.5 Case Size (G.Q) : 110,260 Connection size : DN 50 Connection flanges according to : WN165, square flanges Dimension sheet : Z45540 --- OPERATING CONDITIONS --- fluid to be filtered : water Fluid group according to PED : 2 Fluid Type according to PED : Liquid Max flow rate : not specified Working pressure : not specified Maximum allowable pressure : 25.00 bar Operating temperature : not specified Permitted Operating temperature min : 1.00 °C Permitted Operating temperature max : 60.00 °C --- CONSTRUCTION/ACCEPTANCE --- Construction and design : PED2014/68/EU AD-2000 : Article 4, paragraph 3 Volume of the container 2x: 3.00 liters Curb weight : 36 kg Pressure test according to: Boll & Kirch with certificate --- Construction/Form Certificates --- FB-7-80 pressure test 3.1 : yes no material from : China and India --- MATERIALS --- Filter housing made of : EN-GJS-400-15, nickel-plated on the inside Type of diverter valve: plug valve diverter Material of the switching fitting: EN-GJS-400-15, nickel-plated on the inside Internal parts of the change-over fitting: EN-GJS-400-15, rubberized Lid seals made of : EPDM Circuit seals made of : EPDM --- FILTER ELEMENTS --- Element Type : Basket screen element Element material : CrNi steel Fabric made of : 1.4401 Fabric number : 80 Filter fineness: 150 μm Sieve area 2x: 529 cm² --- EQUIPMENT --- Attached differential pressure indicator: 4.46.2 (optical + electrical) Sealant differential pressure gauge : EPDM Differential pressure setting: cleaning 0.38bar/alarm 0.5bar counter flange. Screws and gaskets : included --- Accessories/connections --- Vent : with plug Emptying : with plug Counterflanges : with flat gasket --- Accessories/differential pressure measurement --- DDA : Readable opposite the flange side --- CORROSION PROTECTION --- Corrosion protection inside : nickel-plated --- Corrosion protection/special paint outside --- Attachments made of stainless steel: unpainted --- LABELLING --- Operating/factory plate: German/English Filters without CE marking :
differential pressure indicator Design overpressure max. 160 bar Media temperature max. 150° C Ambient temperature max. 80° C
4.46.2 P=0.8 (ID 0550014)

Bollfilter
differential pressure indicator Design overpressure max. 160 bar Media temperature max. 150° C Ambient temperature max. 80° C
Differential Pressure Gauge
4.36.2

Bollfilter
Differential Pressure Gauge
Differential pressure contact indicator Material Al Design overpressure max. 100 bar Media temperature max. 150° C Ambient temperature max. 80° C
4.36.2 P=0.5 (0550002)

Bollfilter
Differential pressure contact indicator Material Al Design overpressure max. 100 bar Media temperature max. 150° C Ambient temperature max. 80° C
Differential pressure contact indicator Material Al VA Design overpressure max. 160 bar Media temperature max. 150° C Ambient temperature max. 80° C
4.46.2 P=0.5 (ID 0551426)

Bollfilter
Differential pressure contact indicator Material Al VA Design overpressure max. 160 bar Media temperature max. 150° C Ambient temperature max. 80° C
Differential pressure contact indicator
0550002

Bollfilter
Differential pressure contact indicator
Differential pressure contact indicator
0551426

Bollfilter
Differential pressure contact indicator
DİFFERANTIAL PRESSURE INDICATOR ΔP1 :2,3BAR ΔP2 :3,0bar type:4.36.2
1.6.5.1.2/0.500 DN80

Bollfilter
DİFFERANTIAL PRESSURE INDICATOR ΔP1 :2,3BAR ΔP2 :3,0bar type:4.36.2
DIFFERANTIAL PRESSURE INDICATOR ΔP1 :2.3BAR ΔP2 :3.0bar
type:4.36.2

Bollfilter
DIFFERANTIAL PRESSURE INDICATOR ΔP1 :2.3BAR ΔP2 :3.0bar
deep groove ball bearing
2700050

Bollfilter
deep groove ball bearing
Commodity number : 842199 Net Weight : 0.38kg/pcs Basket sieve with Perbunan magnet
1141937

Bollfilter
Commodity number : 842199 Net Weight : 0.38kg/pcs Basket sieve with Perbunan magnet
Candle removal aid
9100008

Bollfilter
Candle removal aid
BOLLFILTER DUPLEX FILTER TYPE:BFD DN100 FILTER CARTRIDGE
FILTER BOLL 3982445 BFD DN100

Bollfilter
BOLLFILTER DUPLEX FILTER TYPE:BFD DN100 FILTER CARTRIDGE
Base Closed Diameter: 97 mm, Base Side Outer Diameter: 137 mm, Top Outer Diameter: 140 mm, Inner Diameter: 97 mm, Top Outer Diameter: 85 mm, Washable Filter)
Oil Filter (Length: 480 mm

Bollfilter
Base Closed Diameter: 97 mm, Base Side Outer Diameter: 137 mm, Top Outer Diameter: 140 mm, Inner Diameter: 97 mm, Top Outer Diameter: 85 mm, Washable Filter)
Art.Nr.:1980078 pos:1 Bez:Filterelement 129x394 HF1-TC MG-L
3952331

Bollfilter
Art.Nr.:1980078 pos:1 Bez:Filterelement 129x394 HF1-TC MG-L
aquaBoll 6.18.3 Automatic filter type: aquaBoll 6.18.3 Gr 521 DN 250 Filter type : aquaBoll 6.18.3 Size : 521 Connection size : DN 250 Connection flanges according to : Hole pattern of the connection flanges according to : EN 1092-1 PN16 Dimension sheet : Z154933 --- OPERATING CONDITIONS --- Fluid to be filtered : cooling water Fluid group according to PED : 2 Fluid Type according to PED : Liquid Max. flow rate : 185.00 m³/h Operating pressure : 3.50 bar Maximum allowable pressure : 16.00 bar Operating temperature : not specified Permitted Operating temperature min : 0.00 °C Permitted Operating temperature max : 60.00 °C Pressure drop with clean screens: 0.1 bar at 185.00 m³/h Required pre-filtration : 5.00 mm --- BACKWASH --- Backwash medium : Own medium Minimum operating pressure after filter: 3.00 bar Flow rate: 6.30 l/s at 3.50 bar Flushing time : 20 s Control medium : air 4-6 bar ISO8573-1:2010(7/4/4) Motor power : 0.090 kW Operating voltage : 3 ph 400 volts Frequency : 50Hz Control voltage : 230 volts Control : Type 2300 : Z46600 Operating language control: English --- CONSTRUCTION/ACCEPTANCE --- Construction and design : PED2014/68/EU AD-2000 : Article 4, paragraph 3 Total volume : 250.00 liters Pressure test according to: Boll & Kirch with certificate --- Construction/Form Certificates --- FB-7-80 pressure test 3.1 : yes --- MATERIALS --- Filter housing made of : EN-GJS-400-18-LT Inner parts made of: CrNi steel Gasket made of : EPDM --- FILTER ELEMENTS --- Type of element : Fine screen cylinder made of CrNi steel no. of the filter elements: 1 Fabric made of : 1.4401 Fabric number : TELA 5150 Filter fineness: 50 µm Screening area in operation : 25500 cm² Total screen area: 25900 cm² --- EQUIPMENT --- Attached differential pressure indicator: 4.46.2 (optical + electrical) Sealant differential pressure gauge : EPDM Backwash differential pressure setting : 0.38 bar / alarm 0.50 bar Sludge drain valve : pneum. powered flap Sludge drain valve nominal size: DN 80 counter flange. Screws and gaskets : included --- Accessories/connections --- Entry/exit with adapter : no Vent : Option 5.7.0 standard, Z149256 blind flange with screw plug : G1/4'' Drainage : blind flange without drilling Measuring point N5 : Option 5.6.0 standard, Z149256 plug connection Measuring point N6 : blind flange without bore Measuring point N7 : Option 5.6.0 standard, Z149256 plug connection --- Accessories/Nozzle alignment --- Assembly code : S3D2 --- Accessories/fastening material --- Cover Bolts/Nuts and Washers : A4-70 --- Accessories/differential pressure measurement --- DDA connector : hose connection - --- Accessories/Electrical --- Control : loosely enclosed --- Accessories/Miscellaneous --- Lifting eyes : yes Nominal diameter flushing orifice : 23 --- CORROSION PROTECTION --- Primer coat outside: 2K-Ep RAL 5005 Corrosion protection inside : epoxy --- LABELLING --- Operating/Factory Plate : English CE marking according to : - Machinery Directive 2006/42/EC : CE --- DOCUMENTATION --- Language of the operating instructions in : English Operating instructions: 1 Acceptance certificates/certificates: 1 Declaration of Conformity : included
Typ: aquaBoll 6.18.3 Gr 521 DN 250

Bollfilter
aquaBoll 6.18.3 Automatic filter type: aquaBoll 6.18.3 Gr 521 DN 250 Filter type : aquaBoll 6.18.3 Size : 521 Connection size : DN 250 Connection flanges according to : Hole pattern of the connection flanges according to : EN 1092-1 PN16 Dimension sheet : Z154933 --- OPERATING CONDITIONS --- Fluid to be filtered : cooling water Fluid group according to PED : 2 Fluid Type according to PED : Liquid Max. flow rate : 185.00 m³/h Operating pressure : 3.50 bar Maximum allowable pressure : 16.00 bar Operating temperature : not specified Permitted Operating temperature min : 0.00 °C Permitted Operating temperature max : 60.00 °C Pressure drop with clean screens: 0.1 bar at 185.00 m³/h Required pre-filtration : 5.00 mm --- BACKWASH --- Backwash medium : Own medium Minimum operating pressure after filter: 3.00 bar Flow rate: 6.30 l/s at 3.50 bar Flushing time : 20 s Control medium : air 4-6 bar ISO8573-1:2010(7/4/4) Motor power : 0.090 kW Operating voltage : 3 ph 400 volts Frequency : 50Hz Control voltage : 230 volts Control : Type 2300 : Z46600 Operating language control: English --- CONSTRUCTION/ACCEPTANCE --- Construction and design : PED2014/68/EU AD-2000 : Article 4, paragraph 3 Total volume : 250.00 liters Pressure test according to: Boll & Kirch with certificate --- Construction/Form Certificates --- FB-7-80 pressure test 3.1 : yes --- MATERIALS --- Filter housing made of : EN-GJS-400-18-LT Inner parts made of: CrNi steel Gasket made of : EPDM --- FILTER ELEMENTS --- Type of element : Fine screen cylinder made of CrNi steel no. of the filter elements: 1 Fabric made of : 1.4401 Fabric number : TELA 5150 Filter fineness: 50 µm Screening area in operation : 25500 cm² Total screen area: 25900 cm² --- EQUIPMENT --- Attached differential pressure indicator: 4.46.2 (optical + electrical) Sealant differential pressure gauge : EPDM Backwash differential pressure setting : 0.38 bar / alarm 0.50 bar Sludge drain valve : pneum. powered flap Sludge drain valve nominal size: DN 80 counter flange. Screws and gaskets : included --- Accessories/connections --- Entry/exit with adapter : no Vent : Option 5.7.0 standard, Z149256 blind flange with screw plug : G1/4'' Drainage : blind flange without drilling Measuring point N5 : Option 5.6.0 standard, Z149256 plug connection Measuring point N6 : blind flange without bore Measuring point N7 : Option 5.6.0 standard, Z149256 plug connection --- Accessories/Nozzle alignment --- Assembly code : S3D2 --- Accessories/fastening material --- Cover Bolts/Nuts and Washers : A4-70 --- Accessories/differential pressure measurement --- DDA connector : hose connection - --- Accessories/Electrical --- Control : loosely enclosed --- Accessories/Miscellaneous --- Lifting eyes : yes Nominal diameter flushing orifice : 23 --- CORROSION PROTECTION --- Primer coat outside: 2K-Ep RAL 5005 Corrosion protection inside : epoxy --- LABELLING --- Operating/Factory Plate : English CE marking according to : - Machinery Directive 2006/42/EC : CE --- DOCUMENTATION --- Language of the operating instructions in : English Operating instructions: 1 Acceptance certificates/certificates: 1 Declaration of Conformity : included
9900431 9.1.3.2 Spare parts list. Automatic filter for fuel processing module the Westfalia Separator ball & Kirch Filterbaubh Gm fuel preparation module/ When working on heavy fuel periodically clean/ For faster and safer running. one stock filter needs
6.21.1 DN50

Bollfilter
9900431 9.1.3.2 Spare parts list. Automatic filter for fuel processing module the Westfalia Separator ball & Kirch Filterbaubh Gm fuel preparation module/ When working on heavy fuel periodically clean/ For faster and safer running. one stock filter needs
6.60.1 GR05 DN50 SOUND ABSORBER
0056 2614072

Bollfilter
6.60.1 GR05 DN50 SOUND ABSORBER
6.60.1 GR05 DN50 RECEPTACLE
0056 4105912

Bollfilter
6.60.1 GR05 DN50 RECEPTACLE
6.60.1 GR05 DN50 DOUBLE PISTON PART T
0055 4500016

Bollfilter
6.60.1 GR05 DN50 DOUBLE PISTON PART T