"Bronkhorst" markasına ait modeller;
Digital mass flow controller *** similar to SN M 19216084B *** Calibration curve 1: (0) ... 10 ... 500 ln / h Air Pre-pressure: 0.7 barg Outlet pressure: 0 barg Medium / ambient temperature: 20 ° C Setpoint specification: analog 4 ... 20 mA Measurement accuracy: ± 0.5% of meas. Measured value ± 0.1% of meas. Final value * Pressure level: PN 64, test pressure at least 1.5 x pre-pressure Interfaces: analog, RS232 Analog signal: 4 ... 20 mA Supply voltage: +15 ... 24 Vdc Connection input: customer-specific Connection output: customer-specific Sealing material: Viton 51415 Repeatability: better than 0.2% of the measured value Wetted parts: stainless steel 1.4404 (SS 316) Installation position: any, from 10 barg horizontally Temperature limits: -10 ° C ... + 70 ° C Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)
F-201CV-10K-AGD-00-V

Bronkhorst
Digital mass flow controller *** similar to SN M 19216084B *** Calibration curve 1: (0) ... 10 ... 500 ln / h Air Pre-pressure: 0.7 barg Outlet pressure: 0 barg Medium / ambient temperature: 20 ° C Setpoint specification: analog 4 ... 20 mA Measurement accuracy: ± 0.5% of meas. Measured value ± 0.1% of meas. Final value * Pressure level: PN 64, test pressure at least 1.5 x pre-pressure Interfaces: analog, RS232 Analog signal: 4 ... 20 mA Supply voltage: +15 ... 24 Vdc Connection input: customer-specific Connection output: customer-specific Sealing material: Viton 51415 Repeatability: better than 0.2% of the measured value Wetted parts: stainless steel 1.4404 (SS 316) Installation position: any, from 10 barg horizontally Temperature limits: -10 ° C ... + 70 ° C Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)
7.11.049 Mass View flow controller with display Model: MV-306 Protection class: IP-40 medienber. Parts: aluminum Needle valve: SS316 Flow ranges air Range 1: 2 ... 200 ln / min Range 2: 1 ... 100 ln / min Range 3: 0.5 ... 50 ln / min Range 4: 0.4 ... 20 ln / min (can be changed freely by the user) Flow range of preset gases (range 1 to 4) Air, N2, O2, CO2 CO and N2O
Mv-306

Bronkhorst
7.11.049 Mass View flow controller with display Model: MV-306 Protection class: IP-40 medienber. Parts: aluminum Needle valve: SS316 Flow ranges air Range 1: 2 ... 200 ln / min Range 2: 1 ... 100 ln / min Range 3: 0.5 ... 50 ln / min Range 4: 0.4 ... 20 ln / min (can be changed freely by the user) Flow range of preset gases (range 1 to 4) Air, N2, O2, CO2 CO and N2O
7.03.424 Plug-in power supply Model: PiPS-MV Power supply: 100 ... 240 Vac Current consumption: 400 mA Frequency: 50 ... 60 Hz Output voltage: 15 +/- 0.75 Vdc Current: 1000 mA DC connection: RJ45 Article no .: 7.03.424
Pips-Mv

Bronkhorst
7.03.424 Plug-in power supply Model: PiPS-MV Power supply: 100 ... 240 Vac Current consumption: 400 mA Frequency: 50 ... 60 Hz Output voltage: 15 +/- 0.75 Vdc Current: 1000 mA DC connection: RJ45 Article no .: 7.03.424
Typ: M-423-21-00-K Pressure level: PN 200, test pressure 1.5 x working pressure Filter surface: approx. 5 qcm Pore size: 20 microns Mech. Connection input: 1/2" BSPP (internal thread) Mech. connection output: 1/2" BSPP (external thread) Gasket Material: Kalrez 6375 For screwing into one Flow meter/controller Material filter housing: stainless steel 1.4404 (SS 316) Filter medium: sintered metal Temperature limits: up to +70 °C
Alternatively with KALREZ seal:

Bronkhorst
Typ: M-423-21-00-K Pressure level: PN 200, test pressure 1.5 x working pressure Filter surface: approx. 5 qcm Pore size: 20 microns Mech. Connection input: 1/2" BSPP (internal thread) Mech. connection output: 1/2" BSPP (external thread) Gasket Material: Kalrez 6375 For screwing into one Flow meter/controller Material filter housing: stainless steel 1.4404 (SS 316) Filter medium: sintered metal Temperature limits: up to +70 °C
Typ: M-423-21-00-E Pressure level: PN 200, test pressure 1.5 x working pressure Filter surface: approx. 5 qcm Pore size: 20 microns Mech. Connection input: 1/2" BSPP (internal thread) Mech. connection output: 1/2" BSPP (external thread) Gasket material: EPDM 559291 For screwing into one Flow meter/controller Material filter housing: stainless steel 1.4404 (SS 316) Filter medium: sintered metal Temperature limits: up to +70 °C
Alternatively with EPDM seal:

Bronkhorst
Typ: M-423-21-00-E Pressure level: PN 200, test pressure 1.5 x working pressure Filter surface: approx. 5 qcm Pore size: 20 microns Mech. Connection input: 1/2" BSPP (internal thread) Mech. connection output: 1/2" BSPP (external thread) Gasket material: EPDM 559291 For screwing into one Flow meter/controller Material filter housing: stainless steel 1.4404 (SS 316) Filter medium: sintered metal Temperature limits: up to +70 °C
Pressure level: PN 200, test pressure 1.5 x working pressure Filter surface: approx. 5 qcm Pore size: 20 microns Mech. Connection input: G 1/2" BSPP internal thread RS Mech. connection output: G 1/2" BSPP external thread RS Gasket material: Viton 51415 For screwing into one Flow meter/controller Material filter housing: stainless steel 1.4404 (SS 316) Filter medium: sintered metal Temperature limits: up to +70 °C
M-423-21-00-V

Bronkhorst
Pressure level: PN 200, test pressure 1.5 x working pressure Filter surface: approx. 5 qcm Pore size: 20 microns Mech. Connection input: G 1/2" BSPP internal thread RS Mech. connection output: G 1/2" BSPP external thread RS Gasket material: Viton 51415 For screwing into one Flow meter/controller Material filter housing: stainless steel 1.4404 (SS 316) Filter medium: sintered metal Temperature limits: up to +70 °C
Pressure level: PN 200, test pressure 1.5 x working pressure Filter surface: approx. 5 qcm Pore size: 20 microns Mech. Connection input: 1/2" BSPP (internal thread) Mech. connection output: 1/2" BSPP (external thread) Gasket material: Viton 51415 For screwing into one Flow meter/controller Material filter housing: stainless steel 1.4404 (SS 316) Filter medium: sintered metal Temperature limits: up to +70 °C
M-423-21-00-V

Bronkhorst
Pressure level: PN 200, test pressure 1.5 x working pressure Filter surface: approx. 5 qcm Pore size: 20 microns Mech. Connection input: 1/2" BSPP (internal thread) Mech. connection output: 1/2" BSPP (external thread) Gasket material: Viton 51415 For screwing into one Flow meter/controller Material filter housing: stainless steel 1.4404 (SS 316) Filter medium: sintered metal Temperature limits: up to +70 °C
MASSFLOW CONTROLLER 2000 SCCM
AE0123354

Bronkhorst
MASSFLOW CONTROLLER 2000 SCCM
MASSFLOW CONTROLLER
35831

Bronkhorst
MASSFLOW CONTROLLER
Gas Type: Hydrogen Flow rate: 500nm3/h should be measured. Pressure Pmx :40 bar Ambient temperature : -16 , +60 C It will be connected to 1” stainless pipe. We are open to your suggestions regarding the diameter of the flow meter in line with the requested flow. Compatible with Automation ATEX line type flow sensor 4-20mA and HART output Hydrogen gas caliber II 2 G Ex db IIC T4 Gb CERTIFIED II 2 D Ex tb IIIC T90 °C Db CERTIFIED
Flowmeter

Bronkhorst
Gas Type: Hydrogen Flow rate: 500nm3/h should be measured. Pressure Pmx :40 bar Ambient temperature : -16 , +60 C It will be connected to 1” stainless pipe. We are open to your suggestions regarding the diameter of the flow meter in line with the requested flow. Compatible with Automation ATEX line type flow sensor 4-20mA and HART output Hydrogen gas caliber II 2 G Ex db IIC T4 Gb CERTIFIED II 2 D Ex tb IIIC T90 °C Db CERTIFIED
Electronic flow controller Type MV-306 with needle valve - Measuring range 1: 2...200 ln/min Air,N2,O2,CO2,CO,N2O 4...400 ln/min Ar, 1...100 ln/min CH4,C3H8,C4H10 - Measuring range 2: 1...100 ln/min Air,N2,O2,CO,CO2,N2O 0.5...50 ln/min CH4,C3H8,C4H10, 2...200 ln/min Ar - Measuring range 3: 5...50 ln/min Air,N2,O2,CO,CO2,N2O 1...100 ln/min Ar, 0.2...20 ln/min CH4,C3H8,C4H10 - Measuring range 4: 0.4...20 ln/min air,N2,O2,COCO2,N2O 0.8...50 ln/min Ar, 0.2...10 ln/min CH4,C3H8,C4H10 Accuracy: ±2% RD greater than 50% of max capacity ±1% RD+0.5%FS for smaller flows Repeatability: less than 0.1% FS Pressure range: 0...10 barg Temperature range: 0...50°C Connections: G 1/4" BSPP female Electrical connection: 8-pin RJ45 Power supply: 15...24 Vdc Exit: - analogue: 0...5 Vdc - digital: RS232 RS485 (Modbus ASCII/RTU)
Typ MV-306

Bronkhorst
Electronic flow controller Type MV-306 with needle valve - Measuring range 1: 2...200 ln/min Air,N2,O2,CO2,CO,N2O 4...400 ln/min Ar, 1...100 ln/min CH4,C3H8,C4H10 - Measuring range 2: 1...100 ln/min Air,N2,O2,CO,CO2,N2O 0.5...50 ln/min CH4,C3H8,C4H10, 2...200 ln/min Ar - Measuring range 3: 5...50 ln/min Air,N2,O2,CO,CO2,N2O 1...100 ln/min Ar, 0.2...20 ln/min CH4,C3H8,C4H10 - Measuring range 4: 0.4...20 ln/min air,N2,O2,COCO2,N2O 0.8...50 ln/min Ar, 0.2...10 ln/min CH4,C3H8,C4H10 Accuracy: ±2% RD greater than 50% of max capacity ±1% RD+0.5%FS for smaller flows Repeatability: less than 0.1% FS Pressure range: 0...10 barg Temperature range: 0...50°C Connections: G 1/4" BSPP female Electrical connection: 8-pin RJ45 Power supply: 15...24 Vdc Exit: - analogue: 0...5 Vdc - digital: RS232 RS485 (Modbus ASCII/RTU)
Digital mass flow controller *** like SNM8208675D*** Calibration curve: (0) ... 200 m³n/h H2 Initial pressure: 3 barg Back pressure: 1 barg Medium/ambient temperature: 20 °C Setpoint specification: analogue 4...20mA Measurement Accuracy: ±0.5% F.S. reading ±0.1% of reading final value * Pressure level: PN 64, test pressure 1.5 x working pressure Interfaces: analogue, RS232 Analog signal: 4...20 mA Supply voltage: + 15...24 Vdc Connection input: Customized Connection Output: Customized Gasket material: Viton 51415 Parts in contact with media: stainless steel 1.4404 (SS 316) Protection class: IP65 - ATEX CAT 3, Zone 2 optionally possible Factory calibration certificate 3 points included (5 points or ISO 17025 optionally available)
F-206AI-AGD-00-V

Bronkhorst
Digital mass flow controller *** like SNM8208675D*** Calibration curve: (0) ... 200 m³n/h H2 Initial pressure: 3 barg Back pressure: 1 barg Medium/ambient temperature: 20 °C Setpoint specification: analogue 4...20mA Measurement Accuracy: ±0.5% F.S. reading ±0.1% of reading final value * Pressure level: PN 64, test pressure 1.5 x working pressure Interfaces: analogue, RS232 Analog signal: 4...20 mA Supply voltage: + 15...24 Vdc Connection input: Customized Connection Output: Customized Gasket material: Viton 51415 Parts in contact with media: stainless steel 1.4404 (SS 316) Protection class: IP65 - ATEX CAT 3, Zone 2 optionally possible Factory calibration certificate 3 points included (5 points or ISO 17025 optionally available)
Compact display unit - large display (1.8 "TFT) - Direct or percentage display of measured values - manual setpoint specification - integrated counter function - Display of fluid / measuring point number - Mounting options directly on the device - Degree of protection: IP40 - Power supply: 15-24 Vdc - Use for MFM / MFC with RS232 and ext. Signals - Connection via T-connector 9-pin. Sub-D
Typ: Bright B1

Bronkhorst
Compact display unit - large display (1.8 "TFT) - Direct or percentage display of measured values - manual setpoint specification - integrated counter function - Display of fluid / measuring point number - Mounting options directly on the device - Degree of protection: IP40 - Power supply: 15-24 Vdc - Use for MFM / MFC with RS232 and ext. Signals - Connection via T-connector 9-pin. Sub-D
Calibration curve 1: (0)... 0.004...0.2 ln/min Air Inlet pressure: 10 bar(g) Back pressure: 7 bar(g) Medium/ambient temperature: 20 °C Setpoint specification: analogue 4...20 mA Measurement Accuracy: ±0.5% F.S. reading ±0.1% of reading final value * Pressure level: PN 64, test pressure min. 1.5 x pre-pressure Interfaces: analogue, RS232 Analog signal: 4...20 mA Supply voltage: +15...24 Vdc Connection input: Customized Connection Output: Customized Gasket material: Viton 51415 Repeat accuracy: better than 0.2% of the measured value Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: any, from 10 barg horizontally Temperature limits: -10 °C...+70 °C Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)
F-201CV-200-AGD-00-V

Bronkhorst
Calibration curve 1: (0)... 0.004...0.2 ln/min Air Inlet pressure: 10 bar(g) Back pressure: 7 bar(g) Medium/ambient temperature: 20 °C Setpoint specification: analogue 4...20 mA Measurement Accuracy: ±0.5% F.S. reading ±0.1% of reading final value * Pressure level: PN 64, test pressure min. 1.5 x pre-pressure Interfaces: analogue, RS232 Analog signal: 4...20 mA Supply voltage: +15...24 Vdc Connection input: Customized Connection Output: Customized Gasket material: Viton 51415 Repeat accuracy: better than 0.2% of the measured value Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: any, from 10 barg horizontally Temperature limits: -10 °C...+70 °C Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)
4700001832
Flow Gas Flowmeter/Control

Bronkhorst
4700001832
*** Replacement for M17210179B *** Calibration curve 1: (0)... 0.004...0.2 ln/min air Calibration Curve 2-8: Optional Inlet pressure: 9...10 bar(g) Back pressure: 0...7 bar(g) Medium/ambient temperature: 20 °C Setpoint specification: analogue via 4...20 mA Measurement Accuracy: ±0.5% F.S. reading ±0.1% of reading final value * Pressure level: PN 64, test pressure min. 1.5 x pre-pressure Interfaces: analogue, RS232 Analog signal: 4...20 mA Supply voltage: +15...24 Vdc Connection input: 1/4" BSPP internal thread Connection output: 1/4" BSPP internal thread Gasket material: FKM 51415 Repeat accuracy: better than 0.2% of the measured value Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: any, from 10 barg horizontally Temperature limits: -10 °C...+70 °C Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)
F-201CV-200-AGD-00-V

Bronkhorst
*** Replacement for M17210179B *** Calibration curve 1: (0)... 0.004...0.2 ln/min air Calibration Curve 2-8: Optional Inlet pressure: 9...10 bar(g) Back pressure: 0...7 bar(g) Medium/ambient temperature: 20 °C Setpoint specification: analogue via 4...20 mA Measurement Accuracy: ±0.5% F.S. reading ±0.1% of reading final value * Pressure level: PN 64, test pressure min. 1.5 x pre-pressure Interfaces: analogue, RS232 Analog signal: 4...20 mA Supply voltage: +15...24 Vdc Connection input: 1/4" BSPP internal thread Connection output: 1/4" BSPP internal thread Gasket material: FKM 51415 Repeat accuracy: better than 0.2% of the measured value Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: any, from 10 barg horizontally Temperature limits: -10 °C...+70 °C Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)
- Coriolis type (If you have a different type of flowmeter in your product range that meets the following conditions, you can offer it optionally.) - Flow rate: 0.06 - 0.6 m³/h - Fluid: Kerosene - Max. Pressure: 20 bar - Sensitivity: 0.5% - Temperature: -20/+60°C - Material: ASTM 304L or ASTM 316L - Exproof ATEX Zone 1
flowmeter

Bronkhorst
- Coriolis type (If you have a different type of flowmeter in your product range that meets the following conditions, you can offer it optionally.) - Flow rate: 0.06 - 0.6 m³/h - Fluid: Kerosene - Max. Pressure: 20 bar - Sensitivity: 0.5% - Temperature: -20/+60°C - Material: ASTM 304L or ASTM 316L - Exproof ATEX Zone 1
E-7500-10-GGD

Bronkhorst
ELE-007F 1000 min/min

Bronkhorst
F-201CV-10k-AFD-33-V

Bronkhorst