"Euro Cold S R L" markasına ait modeller;
Liquid chiller model ACW-LP 45
Nominal cooling capacity: 5300 W (liquid +22°C,
ambient +32°C)
Cooling: recommended Eurogreen 132 Nano
Cooling gas Freon: R410A
Outlet water temperature between +15°C and +30°C
Max. inlet water temperature: +40°C
Max. ambient temperature: +40°C
Min. ambient temperature: +10°C
Operating voltage: 400 V / 3-phase / 50Hz
Housing color: epoxy powder coated
Matte textured paint, RAL7035
Dimensions: 562 x 512 x 1073 h mm
Housing type: ECP2-B
Delivery includes:
23-liter collection tank including filler neck and
level sight glass indicator
Submerged copper/aluminium evaporators
2 1 piece 11-04-00210 electronic differential thermoregulator (with
outside temperature sensor), set of 4 for
temperature control and alarm for high
coolant temperature, adjustable in 0.1° C
increments
1° set point, temperature control
2° set point, temperature alarm NC for OK status
(suggested setting >5°K with respect to the
maximum setting value at the 1° set point)
Machine stop if the room temperature is too low:
in an extremely cold environment,
prevents the coolant temperature of the cooler
from adapting (too far) to the ambient temperature
(suggested setting <5°K from the minimum
working temperature of the cooler).
The activation of the cooling function is
forced: in an environment that is too warm, it prevents the cooling medium temperature of the cooler from adapting (too far) to the ambient temperature (suggested setting >5°K from the minimum working temperature of the cooler).
3 1 piece 11-12-00001 Alarms switched separately
4 1 piece 11-00-00028 Remote switching
3 1 piece 11-14-A0614 Electrical control box complete with
main switch, relay, circuit breaker,
motor protection and preparation for alarms. Series connection with NC contact for OK state.
4 1 piece 00-04-00135 Centrifugal pump in stainless steel Inox aisi 304, incl.
pressure gauge with the following properties 50 Hz
* Volume flow 5-30 l/min
* Delivery pressure: 4 - 0.5 bar
* Motor power consumption 580 W
The information refers to the domestic water
5 1 piece 00-09-00038 Hydraulic bypass to protect the pump
8 1 piece 11-11-00002 Level monitor with remote alarm NC for OK status. Design for alarm signal via
remote cable
9 1 piece 15-01-00174 HARTING connector 10-pin complete with connector
(cod. Harting 09 30 010 0303 - 1 lever)
9 1 piece 15-01-00141 Harting connector 4-pin (external probe)
10 1 piece 90-00-00002 Special paint finish "TOTAL":
20-CA-00486

Euro Cold S R L
Liquid chiller model ACW-LP 45 Nominal cooling capacity: 5300 W (liquid +22°C, ambient +32°C) Cooling: recommended Eurogreen 132 Nano Cooling gas Freon: R410A Outlet water temperature between +15°C and +30°C Max. inlet water temperature: +40°C Max. ambient temperature: +40°C Min. ambient temperature: +10°C Operating voltage: 400 V / 3-phase / 50Hz Housing color: epoxy powder coated Matte textured paint, RAL7035 Dimensions: 562 x 512 x 1073 h mm Housing type: ECP2-B Delivery includes: 23-liter collection tank including filler neck and level sight glass indicator Submerged copper/aluminium evaporators 2 1 piece 11-04-00210 electronic differential thermoregulator (with outside temperature sensor), set of 4 for temperature control and alarm for high coolant temperature, adjustable in 0.1° C increments 1° set point, temperature control 2° set point, temperature alarm NC for OK status (suggested setting >5°K with respect to the maximum setting value at the 1° set point) Machine stop if the room temperature is too low: in an extremely cold environment, prevents the coolant temperature of the cooler from adapting (too far) to the ambient temperature (suggested setting <5°K from the minimum working temperature of the cooler). The activation of the cooling function is forced: in an environment that is too warm, it prevents the cooling medium temperature of the cooler from adapting (too far) to the ambient temperature (suggested setting >5°K from the minimum working temperature of the cooler). 3 1 piece 11-12-00001 Alarms switched separately 4 1 piece 11-00-00028 Remote switching 3 1 piece 11-14-A0614 Electrical control box complete with main switch, relay, circuit breaker, motor protection and preparation for alarms. Series connection with NC contact for OK state. 4 1 piece 00-04-00135 Centrifugal pump in stainless steel Inox aisi 304, incl. pressure gauge with the following properties 50 Hz * Volume flow 5-30 l/min * Delivery pressure: 4 - 0.5 bar * Motor power consumption 580 W The information refers to the domestic water 5 1 piece 00-09-00038 Hydraulic bypass to protect the pump 8 1 piece 11-11-00002 Level monitor with remote alarm NC for OK status. Design for alarm signal via remote cable 9 1 piece 15-01-00174 HARTING connector 10-pin complete with connector (cod. Harting 09 30 010 0303 - 1 lever) 9 1 piece 15-01-00141 Harting connector 4-pin (external probe) 10 1 piece 90-00-00002 Special paint finish "TOTAL":

Liquid chiller model ACW-LP 45
 Nominal cooling capacity: 5300 W (liquid +22°C,
 Ambient +32°C)
 Cooling: recommended Eurogreen 132 Nano
 Refrigerant gas Freon: R410A
 Outlet water temperature between +15°C and +30°C
 Max. inlet water temperature: +40°C
 Max. ambient temperature: +40°C
 Min. ambient temperature: +10°C
 Operating voltage: 400 V / 3-phase / 50 Hz
 Housing color: epoxy powder coated
 Matt textured paint, RAL7035
 Dimensions: 562 x 512 x 1073 h mm
 Housing type: ECP2-B
 The delivery includes:
 23-liter collection tank including filler neck and
 Level sight glass display
 Immersed copper/aluminum evaporators
 11-04-00210
 electronic differential thermoregulator (with
 outside temperature sensor), set of 4 for the
 Temperature control and alarm high
 Cooling medium temperature, adjustable in 0.1° C
 steps
 1° set point, temperature control
 2° set point, temperature alarm NC for OK condition
 11-12-00001 Alarms switched separately
 11-00-00028 Remote switching
 11-14-A0614 Electrical control box complete with
 Main switch, relay, circuit breaker,
 Motor protection and preparation for alarms. Series connection with NC contact for OK status.
 00-04-00135 Centrifugal pump in stainless steel Inox aisi 304, incl.
 Pressure gauge with the following characteristics 50 Hz
 * Flow rate 5-30 l/min
 * Delivery pressure: 4 - 0.5 bar
 * Motor power consumption 580 W
 The information refers to the domestic water
 00-09-00038 Hydraulic bypass to protect the pump
 11-11-00002 Level monitor with remote alarm NC for OK
 Condition. Design for alarm signal via
 Remote cable
 15-01-00174 HARTING connector 10 pin complete with connector
 (code Harting 09 30 010 0303 - 1 lever)
 15-01-00141 Harting connector 4 pin (external probe)
 90-00-00002 Special paint finish "TOTAL":
20-CA-00486-

Euro Cold S R L
Liquid chiller model ACW-LP 45 Nominal cooling capacity: 5300 W (liquid +22°C, Ambient +32°C) Cooling: recommended Eurogreen 132 Nano Refrigerant gas Freon: R410A Outlet water temperature between +15°C and +30°C Max. inlet water temperature: +40°C Max. ambient temperature: +40°C Min. ambient temperature: +10°C Operating voltage: 400 V / 3-phase / 50 Hz Housing color: epoxy powder coated Matt textured paint, RAL7035 Dimensions: 562 x 512 x 1073 h mm Housing type: ECP2-B The delivery includes: 23-liter collection tank including filler neck and Level sight glass display Immersed copper/aluminum evaporators 11-04-00210 electronic differential thermoregulator (with outside temperature sensor), set of 4 for the Temperature control and alarm high Cooling medium temperature, adjustable in 0.1° C steps 1° set point, temperature control 2° set point, temperature alarm NC for OK condition 11-12-00001 Alarms switched separately 11-00-00028 Remote switching 11-14-A0614 Electrical control box complete with Main switch, relay, circuit breaker, Motor protection and preparation for alarms. Series connection with NC contact for OK status. 00-04-00135 Centrifugal pump in stainless steel Inox aisi 304, incl. Pressure gauge with the following characteristics 50 Hz * Flow rate 5-30 l/min * Delivery pressure: 4 - 0.5 bar * Motor power consumption 580 W The information refers to the domestic water 00-09-00038 Hydraulic bypass to protect the pump 11-11-00002 Level monitor with remote alarm NC for OK Condition. Design for alarm signal via Remote cable 15-01-00174 HARTING connector 10 pin complete with connector (code Harting 09 30 010 0303 - 1 lever) 15-01-00141 Harting connector 4 pin (external probe) 90-00-00002 Special paint finish "TOTAL":