"Finish Thompson" markasına ait modeller;
DPFP007 Pumping station Pipe length: 122 cm; Pipe diameter: 2 inches (5.1 cm) Material: Polypropylene, PTFE, ETFE; Shaft: Alloy 625, FKM O-rings, Impeller: PVDF Hose connection: 1 inch (DN25)
PFP48

Finish Thompson
DPFP007 Pumping station Pipe length: 122 cm; Pipe diameter: 2 inches (5.1 cm) Material: Polypropylene, PTFE, ETFE; Shaft: Alloy 625, FKM O-rings, Impeller: PVDF Hose connection: 1 inch (DN25)
Barrel pump motor M76 Voltage: 1 x 230V/50Hz Power: 680 watts Speed: 0-12,000 rpm Protection class: IP55 Viscosity: maximum 20,000 mPa s Connection cable: 3.5 m with Schuko plug
110021

Finish Thompson
Barrel pump motor M76 Voltage: 1 x 230V/50Hz Power: 680 watts Speed: 0-12,000 rpm Protection class: IP55 Viscosity: maximum 20,000 mPa s Connection cable: 3.5 m with Schuko plug
Barrel pump HVDP48 HR16 B B01 2 B1 HVDP Series Drum Pump, 16:1 reduction (50Hz), Buna Stator, B01 Mechanical seal (carbon / ceramic / FKM), rotor #2, 1-1/2” hose connection
HVDP48 HR16 B B01 2 B1

Finish Thompson
Barrel pump HVDP48 HR16 B B01 2 B1 HVDP Series Drum Pump, 16:1 reduction (50Hz), Buna Stator, B01 Mechanical seal (carbon / ceramic / FKM), rotor #2, 1-1/2” hose connection
106658 Barrel pump motor Voltage: 1 x 230V/50Hz Power: 650 watts Speed: 3,500 to 10,000 rpm Protection rating: IP24 Viscosity: maximum 500 mPa s Connection cable: 3.5 m with Schuko plug Extras: Quick-release fastener
M5V

Finish Thompson
106658 Barrel pump motor Voltage: 1 x 230V/50Hz Power: 650 watts Speed: 3,500 to 10,000 rpm Protection rating: IP24 Viscosity: maximum 500 mPa s Connection cable: 3.5 m with Schuko plug Extras: Quick-release fastener