"Furness Controls" markasına ait modeller;
LEAK DETECTOR
Fco750

Furness Controls
LEAK DETECTOR
Fco750f

Furness Controls
Fco730 Microprocessor Leak Detector

Furness Controls
Type: Flow meter FCO 752 Flow range: 0 - 100 l/min Test pressure range: 0.2 - 4 bar, Calibration Accuracy: ±1% of reading Repeatability: ± 0.2% of reading Permissible measuring media: air and non-corrosive gases, The air quality must be better than ISO8573.1 Class 1-4-2 This corresponds to: Particles = < 0.1micron, Dew point = < 3°C, Oil = < 0.1mg/m3 (0.1ppm) Temperature limit: 0-70°C (of which 10-30°C is compensated) Gas temperature: 0-50°C compensated Display: Backlit LCD display for all Information. Signal lamps for PASS/FAIL Outputs: RS 232 C interface, USB Good/Bad (High/Low) Darlington Outputs Supply voltage: 24 VDC (required separately) Weight: about 5.0kg Housing: dimensions 360 x 135 x 300 mm (WxHxD) or as 19" slide-in housing Weight about 10 kg
FCO 752

Furness Controls
Type: Flow meter FCO 752 Flow range: 0 - 100 l/min Test pressure range: 0.2 - 4 bar, Calibration Accuracy: ±1% of reading Repeatability: ± 0.2% of reading Permissible measuring media: air and non-corrosive gases, The air quality must be better than ISO8573.1 Class 1-4-2 This corresponds to: Particles = < 0.1micron, Dew point = < 3°C, Oil = < 0.1mg/m3 (0.1ppm) Temperature limit: 0-70°C (of which 10-30°C is compensated) Gas temperature: 0-50°C compensated Display: Backlit LCD display for all Information. Signal lamps for PASS/FAIL Outputs: RS 232 C interface, USB Good/Bad (High/Low) Darlington Outputs Supply voltage: 24 VDC (required separately) Weight: about 5.0kg Housing: dimensions 360 x 135 x 300 mm (WxHxD) or as 19" slide-in housing Weight about 10 kg
Test pressure range: e.g. B. Model A8/D32 test pressure: 0 to + 10 bar with automatic pressure regulator Measuring range: 0 to 2000 Pa Measuring accuracy: 10% to 100% of MB: <± 1% of. MW + 1 digit 0% to 10% of MB: <± 0.1% of v. MB + 1 digit Resolution: 1 Pascal Test medium: dry, oil- and dust-free air and non-corrosive gases Test parameters: 300 freely selectable test programs (password protected) >5 years of power-free data storage Operation/display: LCD display for all information. Lamps for good/bad and errors Navigation via 4 arrow keys and 1 enter key Start and reset using the buttons on the front or through External control via control and BCD inputs, RS232, USB, RS485 and LAN Inputs/Outputs: 4 control and 8 BCD inputs, 12 (Opt. 24) progr. Optocoupler inputs 5 – 24 VDC 16 (Opt. 32) progr. Transistor outputs up to 45 VDC/120mA 2 (Opt. 5) progr. pneumatic outputs Interfaces: RS232, USB (option: RS485, LAN) Languages: Selectable: German, English, French, Italian, Spanish Device data: Supply pressure 5 to 10 bar, regulated test pressure max. 16 bar (At 30 bar – version max. 35 bar) Dimensions 360 x 135 x 300 mm (W x H x D) as a table device Supply voltage 24VDC, weight approx. 10 kg Including factory calibration, traceable to national standards.
FC0750

Furness Controls
Test pressure range: e.g. B. Model A8/D32 test pressure: 0 to + 10 bar with automatic pressure regulator Measuring range: 0 to 2000 Pa Measuring accuracy: 10% to 100% of MB: <± 1% of. MW + 1 digit 0% to 10% of MB: <± 0.1% of v. MB + 1 digit Resolution: 1 Pascal Test medium: dry, oil- and dust-free air and non-corrosive gases Test parameters: 300 freely selectable test programs (password protected) >5 years of power-free data storage Operation/display: LCD display for all information. Lamps for good/bad and errors Navigation via 4 arrow keys and 1 enter key Start and reset using the buttons on the front or through External control via control and BCD inputs, RS232, USB, RS485 and LAN Inputs/Outputs: 4 control and 8 BCD inputs, 12 (Opt. 24) progr. Optocoupler inputs 5 – 24 VDC 16 (Opt. 32) progr. Transistor outputs up to 45 VDC/120mA 2 (Opt. 5) progr. pneumatic outputs Interfaces: RS232, USB (option: RS485, LAN) Languages: Selectable: German, English, French, Italian, Spanish Device data: Supply pressure 5 to 10 bar, regulated test pressure max. 16 bar (At 30 bar – version max. 35 bar) Dimensions 360 x 135 x 300 mm (W x H x D) as a table device Supply voltage 24VDC, weight approx. 10 kg Including factory calibration, traceable to national standards.
RS485 and LAN interface
Options for the FCO750:

Furness Controls
RS485 and LAN interface
PRESSURE TRANSMITTER W/DISPLAY 2WIRE 4-20MA
Fco332-2w

Furness Controls
PRESSURE TRANSMITTER W/DISPLAY 2WIRE 4-20MA
Pressure Supply Unit for PPC500 10Pa to 2kPa)(0.04" to 8"H2O
Fco502-1

Furness Controls
Pressure Supply Unit for PPC500 10Pa to 2kPa)(0.04" to 8"H2O
Pressure Supply Unit for PPC500 100Pa to 20kPa(0.4" to 80"H2O
Fco502-2

Furness Controls
Pressure Supply Unit for PPC500 100Pa to 20kPa(0.4" to 80"H2O
Portable desktop device in an aluminum housing with large graphic display 240x64 pixels and blue Backlight Model 2: measuring range ± 2000Pa Basic device without battery operation, without pressure generation - Including four front plug connections for - test adapter - external pressure sensor - external temperature sensor - external PT100 sensor - Including standard factory calibration certificate - Including power supply Ranges: Model 2: ± 2000 Pa <0.1% MW + 0.03 Pa Resolution pressure measurement: 1: 200000 (automatic measuring range / 5-digit display) Temperature effects: Zero point: <0.02% of the measuring range / ° C (eliminated by automatic zero point adjustment) Measuring range: <0.05% / ° C Long-term drift: Typically <0.25% of the measured value per year Overload: 20 times the measuring range Working temperature: +5 to + 45 ° C; Storage temperature: -10 to + 70 ° C; Electrical supply: 12 VDC +/- 10% Inputs: 3 x current: 4 - 20 mA (accuracy @ 20 ° C: <0.025% + 0.002 mA) 1 x voltage: +/- 20 VDC (accuracy @ 20 ° C: <0.025% + 2mV) PT100 input: measuring range: 0 to 50 ° C (0.01 ° C resolution) Absolute pressure input: Measuring range: 600 mbar to 1600 mbar (0.01 mbar resolution) Static pressure: Without internal pump: -1 bar to +4 bar With internal pump: -500mbar to + 500mbar (pump is optional) Interfaces: RS232, USB Type-A (for storage media), USB Type-B (for PC) Measuring medium: clean air, non-corrosive gases Battery life:> 8 hours with normal use (battery is optional) Weight: approx. 4.5 kg Dimensions: (W) 256mm x (H) 115mm x (D) 272mm
FCO 560

Furness Controls
Portable desktop device in an aluminum housing with large graphic display 240x64 pixels and blue Backlight Model 2: measuring range ± 2000Pa Basic device without battery operation, without pressure generation - Including four front plug connections for - test adapter - external pressure sensor - external temperature sensor - external PT100 sensor - Including standard factory calibration certificate - Including power supply Ranges: Model 2: ± 2000 Pa <0.1% MW + 0.03 Pa Resolution pressure measurement: 1: 200000 (automatic measuring range / 5-digit display) Temperature effects: Zero point: <0.02% of the measuring range / ° C (eliminated by automatic zero point adjustment) Measuring range: <0.05% / ° C Long-term drift: Typically <0.25% of the measured value per year Overload: 20 times the measuring range Working temperature: +5 to + 45 ° C; Storage temperature: -10 to + 70 ° C; Electrical supply: 12 VDC +/- 10% Inputs: 3 x current: 4 - 20 mA (accuracy @ 20 ° C: <0.025% + 0.002 mA) 1 x voltage: +/- 20 VDC (accuracy @ 20 ° C: <0.025% + 2mV) PT100 input: measuring range: 0 to 50 ° C (0.01 ° C resolution) Absolute pressure input: Measuring range: 600 mbar to 1600 mbar (0.01 mbar resolution) Static pressure: Without internal pump: -1 bar to +4 bar With internal pump: -500mbar to + 500mbar (pump is optional) Interfaces: RS232, USB Type-A (for storage media), USB Type-B (for PC) Measuring medium: clean air, non-corrosive gases Battery life:> 8 hours with normal use (battery is optional) Weight: approx. 4.5 kg Dimensions: (W) 256mm x (H) 115mm x (D) 272mm
MICROCALIBRATOR
Fc0210

Furness Controls
MICROCALIBRATOR
COIL MAGNETIC 110-220V
D72069031

Furness Controls
COIL MAGNETIC 110-220V
CALIBRATOR
Fco210

Furness Controls
CALIBRATOR
CALIBRATOR
Fc021001

Furness Controls
CALIBRATOR
FC0560

Furness Controls
LAN + RS485 interface extension

Furness Controls
UKAS (=DAkkS) calibration incl. certificate

Furness Controls
FCO 560 Flow Pressure Calibrator

Furness Controls
Fco752

Furness Controls
Fco520

Furness Controls