"Janitza" markasına ait modeller;
Energy meter UMG 96RM-E with Ethernet and RCM, (UL) Supply voltage 90V..277V (50/60Hz); 90V..250V DC, 300V CAT III Voltage measurement, measurement category 300V CATIII, 3 voltage measurement inputs (L-N: 20V-300V; LL: 34V- 520V; 45Hz-65Hz), 3+1 current measurement inputs 0..5A, response current 5mA, Measurement in three-phase 4-wire systems with grounded neutral conductor up to max. 277V / 480V, Measurement in unearthed three-phase 3- Conductor systems up to max. 480V, Measurement in single-phase 3-wire systems up to max. 220V-440V, Measurement in single-phase 2-wire systems up to maximum 220V, 2 digital outputs 3 digital inputs/outputs, configurable 2 analog inputs, optionally also as temperature or Residual current measurement input (RCM) Clock and data memory (256 MB Flash) Interfaces: Ethernet, RS485 Protocol: TCP/IP, Modbus RTU Accessories (included): 33.03.220 installation instructions, Safety instructions and "Software GridVis" quick start 52.22.251 fastening set with screws, 08.01.505 patch cable 2m, twisted, grey 52.00.008 RS485 terminating resistor 120 ohm
UMG 96RM-E, 90-277V, UL

Janitza
Energy meter UMG 96RM-E with Ethernet and RCM, (UL) Supply voltage 90V..277V (50/60Hz); 90V..250V DC, 300V CAT III Voltage measurement, measurement category 300V CATIII, 3 voltage measurement inputs (L-N: 20V-300V; LL: 34V- 520V; 45Hz-65Hz), 3+1 current measurement inputs 0..5A, response current 5mA, Measurement in three-phase 4-wire systems with grounded neutral conductor up to max. 277V / 480V, Measurement in unearthed three-phase 3- Conductor systems up to max. 480V, Measurement in single-phase 3-wire systems up to max. 220V-440V, Measurement in single-phase 2-wire systems up to maximum 220V, 2 digital outputs 3 digital inputs/outputs, configurable 2 analog inputs, optionally also as temperature or Residual current measurement input (RCM) Clock and data memory (256 MB Flash) Interfaces: Ethernet, RS485 Protocol: TCP/IP, Modbus RTU Accessories (included): 33.03.220 installation instructions, Safety instructions and "Software GridVis" quick start 52.22.251 fastening set with screws, 08.01.505 patch cable 2m, twisted, grey 52.00.008 RS485 terminating resistor 120 ohm
Energy meter UMG 96RM-E with Ethernet and RCM, (UL) Supply voltage 24V..90V (50/60Hz); 24V..90V DC, 150V CATIII Voltage measurement, measurement category 300V CATIII, 3 voltage measurement inputs (L-N: 20V-300V; LL: 34V- 520V; 45Hz-65Hz), 3+1 current measurement inputs 0..5A, response current 5mA, Measurement in three-phase 4-wire systems with grounded neutral conductor up to max. 277V/480V, Measurement in unearthed three-phase 3- Conductor systems up to max. 480V, Measurement in single-phase 3-wire systems up to max. 220V-440V, Measurement in single-phase 2-wire systems up to maximum 220V, 2 digital outputs 3 digital inputs/outputs, configurable 2 analog inputs, optionally also as temperature or Residual current measurement input (RCM) clock and data memory (256 MB Flash), home page, Interfaces: Ethernet, RS485 Protocol: TCP/IP, Modbus RTU Accessories (included): 33.03.220 installation instructions, Safety instructions and "Software GridVis" quick start 52.22.251 Fixing kit 08.01.505 Patch cable 2 m, twisted, grey 52.00.008 RS485 terminating resistor 120 Ohm, Programming software "GridVis Essential" Customs tariff number: 90303200 Country of origin: DE
UMG 96RM-E, 24-90V, UL 5222063

Janitza
Energy meter UMG 96RM-E with Ethernet and RCM, (UL) Supply voltage 24V..90V (50/60Hz); 24V..90V DC, 150V CATIII Voltage measurement, measurement category 300V CATIII, 3 voltage measurement inputs (L-N: 20V-300V; LL: 34V- 520V; 45Hz-65Hz), 3+1 current measurement inputs 0..5A, response current 5mA, Measurement in three-phase 4-wire systems with grounded neutral conductor up to max. 277V/480V, Measurement in unearthed three-phase 3- Conductor systems up to max. 480V, Measurement in single-phase 3-wire systems up to max. 220V-440V, Measurement in single-phase 2-wire systems up to maximum 220V, 2 digital outputs 3 digital inputs/outputs, configurable 2 analog inputs, optionally also as temperature or Residual current measurement input (RCM) clock and data memory (256 MB Flash), home page, Interfaces: Ethernet, RS485 Protocol: TCP/IP, Modbus RTU Accessories (included): 33.03.220 installation instructions, Safety instructions and "Software GridVis" quick start 52.22.251 Fixing kit 08.01.505 Patch cable 2 m, twisted, grey 52.00.008 RS485 terminating resistor 120 Ohm, Programming software "GridVis Essential" Customs tariff number: 90303200 Country of origin: DE
Energy meter UMG 96RM-CBM, (UL) Supply voltage 90V..277V (50/60Hz); 90V..250V DC, 300V CAT III Voltage measurement, measurement category 300V CATIII, 3 voltage measurement inputs (L-N: 20V-300V; LL: 34V- 520V; 45Hz-65Hz), 3+1 current measurement inputs 0..5A, response current 5mA, Measurement in three-phase 4-wire systems with grounded neutral conductor up to max. 277V / 480V, Measurement in unearthed three-phase 3- Conductor systems up to max. 480V, Measurement in single-phase 3-wire systems up to max. 220V-440V, Measurement in single-phase 2-wire systems up to maximum 220V, 2+4 digital outputs, 4 digital inputs, Clock and data storage (5MB / 256MB Flash) Interfaces: RS485, USB Protocol: Modbus RTU Accessories (included): 33.03.219 installation instructions, Safety instructions and "Software GridVis" quick start 52.22.251 Fixing kit 08.02.434 USB connection cable 52.00.008 RS485 terminating resistor 120 ohm
UMG 96RM-CBM, 90-277V, UL (5222066)

Janitza
Energy meter UMG 96RM-CBM, (UL) Supply voltage 90V..277V (50/60Hz); 90V..250V DC, 300V CAT III Voltage measurement, measurement category 300V CATIII, 3 voltage measurement inputs (L-N: 20V-300V; LL: 34V- 520V; 45Hz-65Hz), 3+1 current measurement inputs 0..5A, response current 5mA, Measurement in three-phase 4-wire systems with grounded neutral conductor up to max. 277V / 480V, Measurement in unearthed three-phase 3- Conductor systems up to max. 480V, Measurement in single-phase 3-wire systems up to max. 220V-440V, Measurement in single-phase 2-wire systems up to maximum 220V, 2+4 digital outputs, 4 digital inputs, Clock and data storage (5MB / 256MB Flash) Interfaces: RS485, USB Protocol: Modbus RTU Accessories (included): 33.03.219 installation instructions, Safety instructions and "Software GridVis" quick start 52.22.251 Fixing kit 08.02.434 USB connection cable 52.00.008 RS485 terminating resistor 120 ohm
Energy meter UMG 96RM, (UL) Supply voltage 90V...277V (50/60Hz); 90V...250V DC, 300V CAT III Voltage measurement, measurement category 300V CATIII, 3 voltage measurement inputs (L-N: 20V-300V; LL: 34V- 520V; 45Hz-65Hz), 3 current measurement inputs 0..5A, response current 5mA, Measurement in three-phase 4-wire systems with grounded neutral conductor up to max. 277V / 480V, Measurement in unearthed three-phase 3- Conductor systems up to max. 480V, Measurement in single-phase 3-wire systems up to max. 220V-440V, Measurement in single-phase 2-wire systems up to maximum 220V, 2 digital outputs Interface: RS485 / Modbus RTU Accessories (included): 33.03.306 installation instructions, Safety instructions and "Software GridVis" quick start 29.01.036 mounting brackets, (already on device pre-assembled) 52.00.008 RS485 terminating resistor 120 ohm
UMG 96RM, 90-277V, UL

Janitza
Energy meter UMG 96RM, (UL) Supply voltage 90V...277V (50/60Hz); 90V...250V DC, 300V CAT III Voltage measurement, measurement category 300V CATIII, 3 voltage measurement inputs (L-N: 20V-300V; LL: 34V- 520V; 45Hz-65Hz), 3 current measurement inputs 0..5A, response current 5mA, Measurement in three-phase 4-wire systems with grounded neutral conductor up to max. 277V / 480V, Measurement in unearthed three-phase 3- Conductor systems up to max. 480V, Measurement in single-phase 3-wire systems up to max. 220V-440V, Measurement in single-phase 2-wire systems up to maximum 220V, 2 digital outputs Interface: RS485 / Modbus RTU Accessories (included): 33.03.306 installation instructions, Safety instructions and "Software GridVis" quick start 29.01.036 mounting brackets, (already on device pre-assembled) 52.00.008 RS485 terminating resistor 120 ohm
Energy meter UMG 96RM, (UL) Supply voltage 90V...277V (50/60Hz); 90V...250V DC, 300V CAT III Voltage measurement, measurement category 300V CATIII, 3 voltage measurement inputs (L-N: 20V-300V; LL: 34V- 520V; 45Hz-65Hz), 3 current measurement inputs 0..5A, response current 5mA, Measurement in three-phase 4-wire systems with grounded neutral conductor up to max. 277V / 480V, Measurement in unearthed three-phase 3- Conductor systems up to max. 480V, Measurement in single-phase 3-wire systems up to max. 220V-440V, Measurement in single-phase 2-wire systems up to maximum 220V, 2 digital outputs Interface: RS485 / Modbus RTU Accessories (included): 33.03.306 installation instructions, Safety instructions and "Software GridVis" quick start 29.01.036 mounting brackets, (already on device pre-assembled) 52.00.008 RS485 terminating resistor 120 ohm
UMG 96RM, 90-277V, UL

Janitza
Energy meter UMG 96RM, (UL) Supply voltage 90V...277V (50/60Hz); 90V...250V DC, 300V CAT III Voltage measurement, measurement category 300V CATIII, 3 voltage measurement inputs (L-N: 20V-300V; LL: 34V- 520V; 45Hz-65Hz), 3 current measurement inputs 0..5A, response current 5mA, Measurement in three-phase 4-wire systems with grounded neutral conductor up to max. 277V / 480V, Measurement in unearthed three-phase 3- Conductor systems up to max. 480V, Measurement in single-phase 3-wire systems up to max. 220V-440V, Measurement in single-phase 2-wire systems up to maximum 220V, 2 digital outputs Interface: RS485 / Modbus RTU Accessories (included): 33.03.306 installation instructions, Safety instructions and "Software GridVis" quick start 29.01.036 mounting brackets, (already on device pre-assembled) 52.00.008 RS485 terminating resistor 120 ohm
Energy meter UMG 96-PA with clock, battery and measurement data memory (4MB) Front panel installation device, 96 x 96 x 86 mm (WxHxD) Supply voltage: 90V - 277V (50/60) Hz or 90V - 250V DC Installation Category: 300V CAT III Measurement in TN and TT networks Measurement of harmonics up to the 25th Active energy class 0.2S 3 voltage measurement inputs: Measurement category: 600 V CAT III Measurement in 3-phase 4-wire systems up to 417 V/720V (+-10%) according to IEC Measurement in 1-phase 2-wire systems up to 480 V (+-10%) 3 current measurement inputs: Measurement category: 300V CAT II Rated current 5A / 1A adjustable Current measuring range: 5 mA... 6 A Resolution: 0.1mA peripherals: 3x digital inputs and outputs each 1x analogue output 1x RS485 (Modbus RTU) Accessories (included): 33.03.375 installation instructions incl. Safety instructions and "Software GridVis" quick start 52.22.251 Fixing kit 52.00.008 RS485 terminating resistor 120 Ohm
UMG 96-PA, 90-277V 5232001

Janitza
Energy meter UMG 96-PA with clock, battery and measurement data memory (4MB) Front panel installation device, 96 x 96 x 86 mm (WxHxD) Supply voltage: 90V - 277V (50/60) Hz or 90V - 250V DC Installation Category: 300V CAT III Measurement in TN and TT networks Measurement of harmonics up to the 25th Active energy class 0.2S 3 voltage measurement inputs: Measurement category: 600 V CAT III Measurement in 3-phase 4-wire systems up to 417 V/720V (+-10%) according to IEC Measurement in 1-phase 2-wire systems up to 480 V (+-10%) 3 current measurement inputs: Measurement category: 300V CAT II Rated current 5A / 1A adjustable Current measuring range: 5 mA... 6 A Resolution: 0.1mA peripherals: 3x digital inputs and outputs each 1x analogue output 1x RS485 (Modbus RTU) Accessories (included): 33.03.375 installation instructions incl. Safety instructions and "Software GridVis" quick start 52.22.251 Fixing kit 52.00.008 RS485 terminating resistor 120 Ohm
Energy meter UMG 96-PA MID+ MID certified Meter reading certified according to PTB-A 50.7 with clock, battery and data storage 2 years tamper proof Measurement data storage for meter readings Front panel installation device, 96 x 96 x 86 mm (WxHxD) Supply voltage: 90V - 277V (50/60) Hz or 90V - 250V DC Installation Category: 300V CAT III Measurement in TN and TT networks Measurement of harmonics up to the 40th Active energy class 0.2S EU Type Examination Certificate VDE 40048947 Tested according to EN 50470-1, EN 50470-3, CLC TR 50579 Input voltage range: 3 x 57/100 to 3 x 289/500V (+-15%) Accuracy class B according to EN 50470-1 Pulse value of the S0 interface: none Converter 10000 Imp/kWh; automatic heart rate adjustment Use of transducers The 1st digital output is an S0 interface set for purchased and delivered active energy. Including meter reading measurement 3 voltage measurement inputs Measurement category: 600 V CAT III Measurement in 3-phase 4-wire systems up to 230 Measurement in 3-phase 3-wire systems up to 500 V (+-15%) Measurement in 1-phase 2-wire systems up to 230 V / 400V (+-15%) 3 current measurement inputs Measurement category: 300 V CAT II Rated current 5A/2A/1A adjustable (MID-compliant) Current measuring range: 5 mA... 6 A Resolution: 0.1mA Firmware update for the non-MID relevant Part possible (software separation) peripherals: 3x digital inputs and outputs each (one is fixed) 1x analogue output 1x RS485 (Modbus RTU) Accessories (included): 33.03.375 installation instructions incl. Safety instructions and "Software GridVis" quick start 29.01.092 Terminal cover supply 29.01.093 terminal cover measurement 29.01.065 silicone gasket 96 x 96 52.22.251 Fixing kit 52.00.008 RS485 terminator 120 ohm
UMG 96-PA-MID+5232004

Janitza
Energy meter UMG 96-PA MID+ MID certified Meter reading certified according to PTB-A 50.7 with clock, battery and data storage 2 years tamper proof Measurement data storage for meter readings Front panel installation device, 96 x 96 x 86 mm (WxHxD) Supply voltage: 90V - 277V (50/60) Hz or 90V - 250V DC Installation Category: 300V CAT III Measurement in TN and TT networks Measurement of harmonics up to the 40th Active energy class 0.2S EU Type Examination Certificate VDE 40048947 Tested according to EN 50470-1, EN 50470-3, CLC TR 50579 Input voltage range: 3 x 57/100 to 3 x 289/500V (+-15%) Accuracy class B according to EN 50470-1 Pulse value of the S0 interface: none Converter 10000 Imp/kWh; automatic heart rate adjustment Use of transducers The 1st digital output is an S0 interface set for purchased and delivered active energy. Including meter reading measurement 3 voltage measurement inputs Measurement category: 600 V CAT III Measurement in 3-phase 4-wire systems up to 230 Measurement in 3-phase 3-wire systems up to 500 V (+-15%) Measurement in 1-phase 2-wire systems up to 230 V / 400V (+-15%) 3 current measurement inputs Measurement category: 300 V CAT II Rated current 5A/2A/1A adjustable (MID-compliant) Current measuring range: 5 mA... 6 A Resolution: 0.1mA Firmware update for the non-MID relevant Part possible (software separation) peripherals: 3x digital inputs and outputs each (one is fixed) 1x analogue output 1x RS485 (Modbus RTU) Accessories (included): 33.03.375 installation instructions incl. Safety instructions and "Software GridVis" quick start 29.01.092 Terminal cover supply 29.01.093 terminal cover measurement 29.01.065 silicone gasket 96 x 96 52.22.251 Fixing kit 52.00.008 RS485 terminator 120 ohm
Energy meter 3ph. direct meas. 65A,pulse 1401356 Type B23 311-10J For DIN rail mounting 4TE, 2 tariffs 2x inputs to control the tariffs or for counting external pulses 2x outputs optionally as Pulse output for real or Reactive energy or as an alarm output Pulse length: 10-990ms Active energy measurement accuracy: Class 1 Reactive energy measurement accuracy: Class 2 (without MID) Connection cross-section measurement: 25mm² Current measurement range: 0.25 .... 65 A Voltage range: 3x 220-240 AC, -20%-+15% Frequency: 50/60Hz Temperature range: -40 + 70 degrees Celsius No resetting of the energy meter readings Meter is calibrated according to MID and approved according to IEC Customs tariff number: 90283019
1401356

Janitza
Energy meter 3ph. direct meas. 65A,pulse 1401356 Type B23 311-10J For DIN rail mounting 4TE, 2 tariffs 2x inputs to control the tariffs or for counting external pulses 2x outputs optionally as Pulse output for real or Reactive energy or as an alarm output Pulse length: 10-990ms Active energy measurement accuracy: Class 1 Reactive energy measurement accuracy: Class 2 (without MID) Connection cross-section measurement: 25mm² Current measurement range: 0.25 .... 65 A Voltage range: 3x 220-240 AC, -20%-+15% Frequency: 50/60Hz Temperature range: -40 + 70 degrees Celsius No resetting of the energy meter readings Meter is calibrated according to MID and approved according to IEC Customs tariff number: 90283019
Energy meter 3ph. direct meas. 65A,Mbus 1401358 Type B23 313-10J For DIN rail mounting 4TE, 2 tariffs With integrated M-Bus interface 2x inputs to control the tariffs or for counting external pulses 2x outputs optionally as Pulse output for real or Reactive energy or as an alarm output Pulse length: 10-990ms Active energy measurement accuracy: Class 1 Reactive energy measurement accuracy: Class 2 (without MID) Connection cross-section measurement: 25mm² Current measurement range: 0.25 .... 65 A Voltage range: 3x 220-240 AC, -20%-+15% Frequency: 50/60Hz Temperature range: -40 + 70 degrees Celsius No resetting of the energy meter readings Meter is calibrated according to MID and approved according to IEC
1401358

Janitza
Energy meter 3ph. direct meas. 65A,Mbus 1401358 Type B23 313-10J For DIN rail mounting 4TE, 2 tariffs With integrated M-Bus interface 2x inputs to control the tariffs or for counting external pulses 2x outputs optionally as Pulse output for real or Reactive energy or as an alarm output Pulse length: 10-990ms Active energy measurement accuracy: Class 1 Reactive energy measurement accuracy: Class 2 (without MID) Connection cross-section measurement: 25mm² Current measurement range: 0.25 .... 65 A Voltage range: 3x 220-240 AC, -20%-+15% Frequency: 50/60Hz Temperature range: -40 + 70 degrees Celsius No resetting of the energy meter readings Meter is calibrated according to MID and approved according to IEC
Data logger - Auxiliary voltage 20V - 250V AC (45..65Hz) or 20V - 300V DC - 1 RS 485 interface (Modbus RTU, slave, up to 115 kbps) - 1 Ethernet interface (Modbus TCP, NTP ...) - 15 digital / pulse inputs (24VDC) - 3 digital outputs (24V / 50mA), switchable via Modbus, weekly time switch, - 1 temperature measurement input (PT100 / PT1000) 3- wire - 32 MB flash memory - Clock and battery function - 64 weekly time switches - Limit value and temperature monitoring - tariff switching - Modbus Ethernet gateway functionality - Storage of minimum and maximum values (with timestamp) - Configurable recordings, via RS485 and Ethernet readable - mounting on top hat rail (35mm) - Dimensions: 107.5 x 90 x 46 mm (6 TE) Equipment: 3303197 Operating Instructions, Prodata2, German 0801505 Patch cable, RJ-45, twisted, 2m, gray
PRODATA2 20V-250V, UL

Janitza
Data logger - Auxiliary voltage 20V - 250V AC (45..65Hz) or 20V - 300V DC - 1 RS 485 interface (Modbus RTU, slave, up to 115 kbps) - 1 Ethernet interface (Modbus TCP, NTP ...) - 15 digital / pulse inputs (24VDC) - 3 digital outputs (24V / 50mA), switchable via Modbus, weekly time switch, - 1 temperature measurement input (PT100 / PT1000) 3- wire - 32 MB flash memory - Clock and battery function - 64 weekly time switches - Limit value and temperature monitoring - tariff switching - Modbus Ethernet gateway functionality - Storage of minimum and maximum values (with timestamp) - Configurable recordings, via RS485 and Ethernet readable - mounting on top hat rail (35mm) - Dimensions: 107.5 x 90 x 46 mm (6 TE) Equipment: 3303197 Operating Instructions, Prodata2, German 0801505 Patch cable, RJ-45, twisted, 2m, gray
Class A (IEC 61000-4-30) power quality Analyzer with RCM Supply voltage: 95 - 240V (50/60Hz); 80 - 300Vdc Installation category: 300V CATIII 4 voltage measurement inputs, Measurement category: 600V CATIII Measurement in three-phase 4-wire systems up to 417V/720V, Measurement in three-phase 3-wire systems up to 600V, 4 current measuring inputs for current transformers ../1 or ../5A Current measurement range: 0.001 .. 7Arms, 2 digital inputs, 2 digital outputs 1 temperature input, 2 RCM inputs Data memory: 256MB Flash, Interfaces: RS485, Profibus DP V0, Ethernet 10/100 BaseTX Incl. web server and the following APPs: APP measured value monitor: graphic display from online & historical readings APP EN 50160 Watchdog PRO: Monitoring the voltage quality limit values ​​according to EN 50160 APP IEC 61000-2-4 Watchdog PRO: Power quality monitoring Limit values ​​according to IEC 61000-2-4 Programming software "GridVis Essential" Included: Item No.: 5219301, 2 fastening clips Art.No.: 0801505, cross patch cable, CAT5e, 2m, grey/green Art.No.: 3303336 Quick start UMG 512 including safety instructions including software GridVis quick start Customs tariff number: 90303200 Country of origin: DE
5217011 UMG 512-PRO - 95V-240V AC (UL)

Janitza
Class A (IEC 61000-4-30) power quality Analyzer with RCM Supply voltage: 95 - 240V (50/60Hz); 80 - 300Vdc Installation category: 300V CATIII 4 voltage measurement inputs, Measurement category: 600V CATIII Measurement in three-phase 4-wire systems up to 417V/720V, Measurement in three-phase 3-wire systems up to 600V, 4 current measuring inputs for current transformers ../1 or ../5A Current measurement range: 0.001 .. 7Arms, 2 digital inputs, 2 digital outputs 1 temperature input, 2 RCM inputs Data memory: 256MB Flash, Interfaces: RS485, Profibus DP V0, Ethernet 10/100 BaseTX Incl. web server and the following APPs: APP measured value monitor: graphic display from online & historical readings APP EN 50160 Watchdog PRO: Monitoring the voltage quality limit values ​​according to EN 50160 APP IEC 61000-2-4 Watchdog PRO: Power quality monitoring Limit values ​​according to IEC 61000-2-4 Programming software "GridVis Essential" Included: Item No.: 5219301, 2 fastening clips Art.No.: 0801505, cross patch cable, CAT5e, 2m, grey/green Art.No.: 3303336 Quick start UMG 512 including safety instructions including software GridVis quick start Customs tariff number: 90303200 Country of origin: DE
Class A (IEC 61000-4-30) power quality Analyzer with RCM Supply voltage: 95 - 240V (50/60Hz); 80 - 300Vdc Installation category: 300V CATIII 4 voltage measurement inputs, Measurement category: 600V CATIII Measurement in three-phase 4-wire systems up to 417V/720V, Measurement in three-phase 3-wire systems up to 600V, 4 current measurement inputs for current transformers ../1 or ../5A Current measurement range: 0.001 .. 7Arms, 2 digital inputs, 2 digital outputs 1 temperature input, 2 RCM inputs Data memory: 256MB Flash, Interfaces: RS485, Profibus DP V0, Ethernet 10/100 BaseTX Incl. web server and the following APPs: APP measured value monitor: graphic display from online & historical readings APP EN 50160 Watchdog PRO: Monitoring of the voltage quality limit values according to EN 50160 APP IEC 61000-2-4 Watchdog PRO: Power quality monitoring Limit values according to IEC 61000-2-4 Programming software "GridVis Essential" Included: Item No.: 5219301, 2 fastening clips Art.No.: 0801505, cross patch cable, CAT5e, 2m, grey/green Art.No.: 3303336 Quick start UMG 512 including safety instructions including software GridVis quick start
UMG 512-PRO - 95V-240V AC (UL)

Janitza
Class A (IEC 61000-4-30) power quality Analyzer with RCM Supply voltage: 95 - 240V (50/60Hz); 80 - 300Vdc Installation category: 300V CATIII 4 voltage measurement inputs, Measurement category: 600V CATIII Measurement in three-phase 4-wire systems up to 417V/720V, Measurement in three-phase 3-wire systems up to 600V, 4 current measurement inputs for current transformers ../1 or ../5A Current measurement range: 0.001 .. 7Arms, 2 digital inputs, 2 digital outputs 1 temperature input, 2 RCM inputs Data memory: 256MB Flash, Interfaces: RS485, Profibus DP V0, Ethernet 10/100 BaseTX Incl. web server and the following APPs: APP measured value monitor: graphic display from online & historical readings APP EN 50160 Watchdog PRO: Monitoring of the voltage quality limit values according to EN 50160 APP IEC 61000-2-4 Watchdog PRO: Power quality monitoring Limit values according to IEC 61000-2-4 Programming software "GridVis Essential" Included: Item No.: 5219301, 2 fastening clips Art.No.: 0801505, cross patch cable, CAT5e, 2m, grey/green Art.No.: 3303336 Quick start UMG 512 including safety instructions including software GridVis quick start
Art nr. 1416028 Reactive power controller for front panel installation, with 12 relay outputs Voltage path L-N 30-440V, L-L 50- 760V50/60Hz Measuring current: Current transformer .../1A, .../5A Operating voltage: 110-440V Customs tariff number: 90328900 country of origin: Germany Weight: 1.0kg
Prophi 12R (Prophi 7)

Janitza
Art nr. 1416028 Reactive power controller for front panel installation, with 12 relay outputs Voltage path L-N 30-440V, L-L 50- 760V50/60Hz Measuring current: Current transformer .../1A, .../5A Operating voltage: 110-440V Customs tariff number: 90328900 country of origin: Germany Weight: 1.0kg
Alternative for UMG 96 Note: In contrast to the UMG 96, this device is a DIN rail device. Modular energy meter UMG 806 DIN rail mounting, 90 x 90 x 63.5 mm (WxHxD) Supply: AC/DC (80-270) V Measurement in TN, TT and IT networks Measurement of harmonics up to the 31st 3 voltage measurement inputs Measurement category: 300 V CAT III Measurement in 3-phase 4-wire systems up to 230 V/400 V 4 current measurement inputs Measurement category: 300V CAT II Rated current 5A / 1A adjustable Current measuring range: 5 mA... 6 A Resolution: 0.1mA periphery 1x pulse output 1x temperature input 1x analog inputs for differential and PE current Measurement 1x RS485 (Modbus RTU) Accessories (included): 33.03.382 installation instructions incl. Safety instructions and "Software GridVis" quick start Set of connector plugs
UMG 806 1402025

Janitza
Alternative for UMG 96 Note: In contrast to the UMG 96, this device is a DIN rail device. Modular energy meter UMG 806 DIN rail mounting, 90 x 90 x 63.5 mm (WxHxD) Supply: AC/DC (80-270) V Measurement in TN, TT and IT networks Measurement of harmonics up to the 31st 3 voltage measurement inputs Measurement category: 300 V CAT III Measurement in 3-phase 4-wire systems up to 230 V/400 V 4 current measurement inputs Measurement category: 300V CAT II Rated current 5A / 1A adjustable Current measuring range: 5 mA... 6 A Resolution: 0.1mA periphery 1x pulse output 1x temperature input 1x analog inputs for differential and PE current Measurement 1x RS485 (Modbus RTU) Accessories (included): 33.03.382 installation instructions incl. Safety instructions and "Software GridVis" quick start Set of connector plugs
Alternative for UMG 96 Energy meter UMG 96-PA with clock, battery and measurement data memory (4MB) Front panel installation device, 96 x 96 x 86 mm (WxHxD) Supply voltage: 90V - 277V (50/60) Hz or 90V - 250V DC Installation Category: 300V CAT III Measurement in TN and TT networks Measurement of harmonics up to the 25th Active energy class 0.2S 3 voltage measurement inputs: Measurement category: 600 V CAT III Measurement in 3-phase 4-wire systems up to 417 V/720V (+-10%) according to IEC Measurement in 1-phase 2-wire systems up to 480 V (+-10%) 3 current measurement inputs: Measurement category: 300V CAT II Rated current 5A / 1A adjustable Current measuring range: 5 mA... 6 A Resolution: 0.1mA peripherals: 3x digital inputs and outputs each 1x analogue output 1x RS485 (Modbus RTU) Accessories (included): 33.03.375 installation instructions incl. Safety instructions and "Software GridVis" quick start 52.22.251 Fixing kit 52.00.008 RS485 terminator 120 ohm
UMG 96-PA, 90-277V 5232001

Janitza
Alternative for UMG 96 Energy meter UMG 96-PA with clock, battery and measurement data memory (4MB) Front panel installation device, 96 x 96 x 86 mm (WxHxD) Supply voltage: 90V - 277V (50/60) Hz or 90V - 250V DC Installation Category: 300V CAT III Measurement in TN and TT networks Measurement of harmonics up to the 25th Active energy class 0.2S 3 voltage measurement inputs: Measurement category: 600 V CAT III Measurement in 3-phase 4-wire systems up to 417 V/720V (+-10%) according to IEC Measurement in 1-phase 2-wire systems up to 480 V (+-10%) 3 current measurement inputs: Measurement category: 300V CAT II Rated current 5A / 1A adjustable Current measuring range: 5 mA... 6 A Resolution: 0.1mA peripherals: 3x digital inputs and outputs each 1x analogue output 1x RS485 (Modbus RTU) Accessories (included): 33.03.375 installation instructions incl. Safety instructions and "Software GridVis" quick start 52.22.251 Fixing kit 52.00.008 RS485 terminator 120 ohm
Accessories Prodata2 S0 module for a group of S0 inputs, equipped with 1.3 kOhm resistors
Prodata2 S0-Modul

Janitza
Accessories Prodata2 S0 module for a group of S0 inputs, equipped with 1.3 kOhm resistors
90-277V, UL 5222090 Energy measuring device UMG 96RM-PN with Profinet, (UL) Supply voltage 90V..277V (50 / 60Hz); 90V..250V DC, 300V CATIII Voltage measurement, measurement category 300V CATIII, 3 voltage measurement inputs (L-N: 20V-300V; LL: 34V- 520V; 45Hz-65Hz), 3 + 1 current measurement inputs 0..5A, response current 5mA, Measurement in three-phase 4-wire systems with earthed neutral conductor up to max. 277V / 480V, Measurement in earthed three-phase 3- Conductor systems up to max. 480V, Measurement in earthed single-phase 3- Ladder systems up to max. 220V-440V, Measurement in earthed single-phase 2- Ladder systems up to max. 220V, 2 digital outputs, 3 digital inputs / outputs, configurable, 2 analog inputs, optionally as temperature or Differential current measurement input, Interfaces: RS 485, Ethernet Protocol: Profinet, TCP / IP, Modbus RTU Accessories (included): 33.03.339 Installation instructions, Safety instructions and "Software GridVis" quick start 52.22.251 mounting kit 01/08/505 Patch cable 2m twisted gray 52.00.008 RS485 terminating resistor 120 Ohm "GridVis Essential" programming software Customs tariff number: 90303200 Country of origin: DE
UMG 96RM-PN

Janitza
90-277V, UL 5222090 Energy measuring device UMG 96RM-PN with Profinet, (UL) Supply voltage 90V..277V (50 / 60Hz); 90V..250V DC, 300V CATIII Voltage measurement, measurement category 300V CATIII, 3 voltage measurement inputs (L-N: 20V-300V; LL: 34V- 520V; 45Hz-65Hz), 3 + 1 current measurement inputs 0..5A, response current 5mA, Measurement in three-phase 4-wire systems with earthed neutral conductor up to max. 277V / 480V, Measurement in earthed three-phase 3- Conductor systems up to max. 480V, Measurement in earthed single-phase 3- Ladder systems up to max. 220V-440V, Measurement in earthed single-phase 2- Ladder systems up to max. 220V, 2 digital outputs, 3 digital inputs / outputs, configurable, 2 analog inputs, optionally as temperature or Differential current measurement input, Interfaces: RS 485, Ethernet Protocol: Profinet, TCP / IP, Modbus RTU Accessories (included): 33.03.339 Installation instructions, Safety instructions and "Software GridVis" quick start 52.22.251 mounting kit 01/08/505 Patch cable 2m twisted gray 52.00.008 RS485 terminating resistor 120 Ohm "GridVis Essential" programming software Customs tariff number: 90303200 Country of origin: DE
5236001 Energy measuring device UMG 96-PQ-L with clock, battery and measurement data memory (64MB) Front panel device, 96 x 96 x 86 mm (WxHxD) Supply voltage: 90 V - 277 V (50/60) Hz or 90 V - 250 V DC Installation category: 300 V CAT III Measurement in TN and TT networks Measurement of harmonics up to 65 Full wave events Real work class 0.2S 3 voltage measurement inputs: Measurement category: 600 V CAT III Measurement in 3-phase 4-wire systems up to 417 V / 720 V (+ -10%) according to IEC Measurement in 1-phase 2-wire systems up to 480 V (+ -10%) 3 current measurement inputs: Measurement category: 300V CAT II Nominal current 5A / 1A adjustable Current measuring range: 5 mA ... 6 A Resolution: 0.1mA Periphery: 3x digital inputs and outputs each 1x analog output 1x RS485 (Modbus RTU) Accessories (included): 33.03.389 installation instructions incl. Safety instructions and "Software GridVis" Quick start 52.22.251 mounting kit 52.00.008 RS485 terminating resistor 120 ohm "GridVis Essentials" programming software Customs tariff number: 90303200 Country of origin: DE
UMG 96-PQ-L, 90-277V

Janitza
5236001 Energy measuring device UMG 96-PQ-L with clock, battery and measurement data memory (64MB) Front panel device, 96 x 96 x 86 mm (WxHxD) Supply voltage: 90 V - 277 V (50/60) Hz or 90 V - 250 V DC Installation category: 300 V CAT III Measurement in TN and TT networks Measurement of harmonics up to 65 Full wave events Real work class 0.2S 3 voltage measurement inputs: Measurement category: 600 V CAT III Measurement in 3-phase 4-wire systems up to 417 V / 720 V (+ -10%) according to IEC Measurement in 1-phase 2-wire systems up to 480 V (+ -10%) 3 current measurement inputs: Measurement category: 300V CAT II Nominal current 5A / 1A adjustable Current measuring range: 5 mA ... 6 A Resolution: 0.1mA Periphery: 3x digital inputs and outputs each 1x analog output 1x RS485 (Modbus RTU) Accessories (included): 33.03.389 installation instructions incl. Safety instructions and "Software GridVis" Quick start 52.22.251 mounting kit 52.00.008 RS485 terminating resistor 120 ohm "GridVis Essentials" programming software Customs tariff number: 90303200 Country of origin: DE
5234002 Energy measuring device UMG 96-S2 with Backlight Front panel built-in device, 96 x 96 x 48 mm (WxHxD) Supply voltage: 90V - 265V (50/60) Hz or 90V - 250V DC Installation category: 300V CAT III Measurement in TN and TT networks Measurement of harmonics up to the 15th 4 voltage measurement inputs: Measurement category: 300 V CAT III Measurement in 3-phase 4-wire systems up to 230 V / 400 V (+-10%) according to IEC 3 current measurement inputs: Measuring category: 300V CAT II Rated current 5A/1A adjustable Current measuring range: 0.5 mA... 6 A Resolution: 1mA Periphery: 1 pulse output 1x RS485 (Modbus RTU) Accessories (included): 33.03.372 installation instructions incl. Safety instructions and “Software GridVis” Quick start 29.01.036 Fastening clips (already on device pre-assembled) 52.00.008 RS485 terminating resistor 120 ohm “GridVis Essential” programming software
UMG 96-S2 Backlight, 90-265V

Janitza
5234002 Energy measuring device UMG 96-S2 with Backlight Front panel built-in device, 96 x 96 x 48 mm (WxHxD) Supply voltage: 90V - 265V (50/60) Hz or 90V - 250V DC Installation category: 300V CAT III Measurement in TN and TT networks Measurement of harmonics up to the 15th 4 voltage measurement inputs: Measurement category: 300 V CAT III Measurement in 3-phase 4-wire systems up to 230 V / 400 V (+-10%) according to IEC 3 current measurement inputs: Measuring category: 300V CAT II Rated current 5A/1A adjustable Current measuring range: 0.5 mA... 6 A Resolution: 1mA Periphery: 1 pulse output 1x RS485 (Modbus RTU) Accessories (included): 33.03.372 installation instructions incl. Safety instructions and “Software GridVis” Quick start 29.01.036 Fastening clips (already on device pre-assembled) 52.00.008 RS485 terminating resistor 120 ohm “GridVis Essential” programming software
5228001 Universal measuring device UMG 103-CBM with clock, battery and measurement data memory (4MB) Device dimensions in mm (LxWxH): 46 x 71.5 x 98 Supply voltage: 115V ... 277V / 1.5VA Installation category: 300V CAT III Measurement in TN and TT networks Measurement of harmonics up to 40. 4 voltage measurement inputs Measurement category: 300V CAT III Measurement in three-phase 4-wire systems up to 277V Measurement in three-phase 3-wire systems up to 480V 3 current measurement inputs for current transformers Measurement category: 300V CAT II Nominal current 5A / 1A (adjustable) Measuring range: 0.005 ... 6 Arms Data storage: 4MB Flash Interfaces: RS485 (Modbus RTU / slave) Accessories (included): 33.03.345 installation instructions incl. Safety instructions and 'Software GridVis' Quick start 52.00.008 RS485 terminating resistor 120 ohm
UMG103-CBM for the top hat rail

Janitza
5228001 Universal measuring device UMG 103-CBM with clock, battery and measurement data memory (4MB) Device dimensions in mm (LxWxH): 46 x 71.5 x 98 Supply voltage: 115V ... 277V / 1.5VA Installation category: 300V CAT III Measurement in TN and TT networks Measurement of harmonics up to 40. 4 voltage measurement inputs Measurement category: 300V CAT III Measurement in three-phase 4-wire systems up to 277V Measurement in three-phase 3-wire systems up to 480V 3 current measurement inputs for current transformers Measurement category: 300V CAT II Nominal current 5A / 1A (adjustable) Measuring range: 0.005 ... 6 Arms Data storage: 4MB Flash Interfaces: RS485 (Modbus RTU / slave) Accessories (included): 33.03.345 installation instructions incl. Safety instructions and 'Software GridVis' Quick start 52.00.008 RS485 terminating resistor 120 ohm