"Kimo" markasına ait modeller;
Optionally, several measurements can be carried out at the same time correspond to probes and modules such as Pressure, Differential pressure, air speed, volume flow, rel. Humidity, dew point, temperature, CO2, CO and (barom. air pressure) possible. You can also use the pressure signal the SQR/3 function (optional) the air speed, the volume flow is shown on the display and as analog signal can be further processed. Technical data: Power supply: 24V AC/DC Analogue outputs: 2 x 0/4-20 mA or 2 x 0/5-10V (Optional: 4 x 0/4-20 mA or 4 x 0/5-10V) Relay outputs: 4 x changeover contacts 5A / 230V (optional) exchangeb. Pressure modules including temperature input (+/- 100Pa, 500Pa, 1000Pa, 10,000Pa optional) Optional: Interface for RS485 Modbus-RTU protocol and Ethernet networks. Please note when ordering, the Ethernet interface cannot be retrofitted. Housing: IP 65 ABS housing with stainless steel front including 4 x 2 colored LEDs and acoustic alarm Operating temperature: -10..to + 50°C All transmitter settings can be carried out using the keypad on the device or (optionally) via the parameterization software LCC-S quickly and easily from your laptop. Included in delivery: bracket / adjustment certificate DANGER: We would like to point out that probes, modules etc. are not included.
C 310-BO with display

Kimo
Optionally, several measurements can be carried out at the same time correspond to probes and modules such as Pressure, Differential pressure, air speed, volume flow, rel. Humidity, dew point, temperature, CO2, CO and (barom. air pressure) possible. You can also use the pressure signal the SQR/3 function (optional) the air speed, the volume flow is shown on the display and as analog signal can be further processed. Technical data: Power supply: 24V AC/DC Analogue outputs: 2 x 0/4-20 mA or 2 x 0/5-10V (Optional: 4 x 0/4-20 mA or 4 x 0/5-10V) Relay outputs: 4 x changeover contacts 5A / 230V (optional) exchangeb. Pressure modules including temperature input (+/- 100Pa, 500Pa, 1000Pa, 10,000Pa optional) Optional: Interface for RS485 Modbus-RTU protocol and Ethernet networks. Please note when ordering, the Ethernet interface cannot be retrofitted. Housing: IP 65 ABS housing with stainless steel front including 4 x 2 colored LEDs and acoustic alarm Operating temperature: -10..to + 50°C All transmitter settings can be carried out using the keypad on the device or (optionally) via the parameterization software LCC-S quickly and easily from your laptop. Included in delivery: bracket / adjustment certificate DANGER: We would like to point out that probes, modules etc. are not included.
Multifunction transmitter Art.-Nr.: 56-24410 which adapts to your measurement requirements. Optional are several measurements simultaneously with the correspond to probes and modules such as e.g. differential pressure, air velocity, volume flow, rel. Humidity, dew point, temperature, CO2, CO and ( barometric air pressure ) possible. Likewise, the pressure signal with the SQR/3 function (optional) the air speed, the flow rate is shown on the display and as analogue signal can be further processed. Technical specifications: Voltage supply: 24 V AC / DC Analog outputs: 2 x 0/4-20 mA or 2 x 0/5-10V ( Optional: 4 x 0/4-20 mA or 4 x 0/5-10V ) Relay outputs: 4 x changeover contacts 5A / 230V (optional) interchangeable Pressure modules including temperature input ( +/- 100Pa, 500Pa, 1000Pa, 10,000Pa optional ) Optional: Interface for RS485 Modbus-RTU protocol and Ethernet networks. Please note when ordering the Ethernet interface cannot be retrofitted. Housing: IP 65 ABS housing with stainless steel front incl. 4 x 2 colored LEDs and acoustic alarm Operating temperature: -10..to + 50°C All transmitter settings can be carried out using the keypad on the device or (optionally) via the parameterization software LCC-S quickly and easily from your laptop. Delivery: with wall bracket and adjustment certificate
C 310-BO mit Display

Kimo
Multifunction transmitter Art.-Nr.: 56-24410 which adapts to your measurement requirements. Optional are several measurements simultaneously with the correspond to probes and modules such as e.g. differential pressure, air velocity, volume flow, rel. Humidity, dew point, temperature, CO2, CO and ( barometric air pressure ) possible. Likewise, the pressure signal with the SQR/3 function (optional) the air speed, the flow rate is shown on the display and as analogue signal can be further processed. Technical specifications: Voltage supply: 24 V AC / DC Analog outputs: 2 x 0/4-20 mA or 2 x 0/5-10V ( Optional: 4 x 0/4-20 mA or 4 x 0/5-10V ) Relay outputs: 4 x changeover contacts 5A / 230V (optional) interchangeable Pressure modules including temperature input ( +/- 100Pa, 500Pa, 1000Pa, 10,000Pa optional ) Optional: Interface for RS485 Modbus-RTU protocol and Ethernet networks. Please note when ordering the Ethernet interface cannot be retrofitted. Housing: IP 65 ABS housing with stainless steel front incl. 4 x 2 colored LEDs and acoustic alarm Operating temperature: -10..to + 50°C All transmitter settings can be carried out using the keypad on the device or (optionally) via the parameterization software LCC-S quickly and easily from your laptop. Delivery: with wall bracket and adjustment certificate
Model: TH210-BODI/150-R with display remote stainless steel probe, Sensor length: 150mm / diameter 13mm Cable length 1.9 m (other lengths available) ( Optional sensor mounting clamps Duct Mount: BF13 or BFP-13 Wall mount: RBE-13 ) Humidity: 5...95% RH Temperature: -40...+180 °C More functions: Absolute humidity, dew point, enthalpy which is also available as an analog output signal can be used. Supply: 24 VDC/AC 2 x analogue outputs: 4...20 mA or 0...10 V 2 relay outputs / changeover (3A / 230V) Housing/degree of protection: ABS, IP 65
Temperature and humidity transmitter

Kimo
Model: TH210-BODI/150-R with display remote stainless steel probe, Sensor length: 150mm / diameter 13mm Cable length 1.9 m (other lengths available) ( Optional sensor mounting clamps Duct Mount: BF13 or BFP-13 Wall mount: RBE-13 ) Humidity: 5...95% RH Temperature: -40...+180 °C More functions: Absolute humidity, dew point, enthalpy which is also available as an analog output signal can be used. Supply: 24 VDC/AC 2 x analogue outputs: 4...20 mA or 0...10 V 2 relay outputs / changeover (3A / 230V) Housing/degree of protection: ABS, IP 65
Length: 500 mm
SIK 500 HT

Kimo
Length: 500 mm
KISTOCK USB data logger for relative humidity and temperature Integrated USB connector for direct connection to the PC. Recorded measured values are automatically generated in PDF format. It is used for the standard Setting and data download no special software required. Adjustment certificate also saved as a PDF. Housing material compatible for food industry Type: KH-120 with display For temperature and humidity Data storage: 50,000 measurement points Measuring ranges: Temperature: -20.. to +70°C Relative humidity: 5 to 95% RH 2 adjustable alarm limits per channel Power supply: CR 2450 battery can be replaced by yourself With magnetic holder Housing type: IP 20 The full version KIC3-N is available as an option This allows, for example, the start/stop function on the device be activated etc.
KH-120

Kimo
KISTOCK USB data logger for relative humidity and temperature Integrated USB connector for direct connection to the PC. Recorded measured values are automatically generated in PDF format. It is used for the standard Setting and data download no special software required. Adjustment certificate also saved as a PDF. Housing material compatible for food industry Type: KH-120 with display For temperature and humidity Data storage: 50,000 measurement points Measuring ranges: Temperature: -20.. to +70°C Relative humidity: 5 to 95% RH 2 adjustable alarm limits per channel Power supply: CR 2450 battery can be replaced by yourself With magnetic holder Housing type: IP 20 The full version KIC3-N is available as an option This allows, for example, the start/stop function on the device be activated etc.
KIMO pressure calibrator for mobile calibration of pressure sensors Pressure range: -2500 ... +2500 Pa with pressure sensor for pos. and negative pressure Very high accuracy with PC interface and evaluation software Included in the delivery are... - 2 x 1m silicone hose - Cable for power supply - USB cable and evaluation software - Operating instructions (English) - Calibration certificate Item No.: 56-24485
GP 500-1

Kimo
KIMO pressure calibrator for mobile calibration of pressure sensors Pressure range: -2500 ... +2500 Pa with pressure sensor for pos. and negative pressure Very high accuracy with PC interface and evaluation software Included in the delivery are... - 2 x 1m silicone hose - Cable for power supply - USB cable and evaluation software - Operating instructions (English) - Calibration certificate Item No.: 56-24485
interchangeable humidity probe for class 310 Stainless steel probe with stainless steel filter for relative humidity and Temperature. Suitable for all KIMO transmitters of the class 310 Measuring range: 5 ... 95%RH and -40 ... +180°C Cable: white silicone cable, 2 m length Measuring probe: Ø 13 mm, 300 mm length different filter caps available (optional) delivered with adjustment certificate Calibration certificate (optional)
SHDI-300

Kimo
interchangeable humidity probe for class 310 Stainless steel probe with stainless steel filter for relative humidity and Temperature. Suitable for all KIMO transmitters of the class 310 Measuring range: 5 ... 95%RH and -40 ... +180°C Cable: white silicone cable, 2 m length Measuring probe: Ø 13 mm, 300 mm length different filter caps available (optional) delivered with adjustment certificate Calibration certificate (optional)
including temperature input for C310 transmitter Type: SPI2-100 The module has one separate temperature input (Type-K) (Temperature compensation possible) No zero point drift thanks to automatic zero point adjustment, which ensures good long-term stability. Measuring ranges: Pressure: +/- 100 Pa (other measuring ranges available) Resolution: 1 Pa High resolution option with 0.1 Pa Type: HRP Accuracy: ±0.2% Temperature: -200 ... 1300°C (depending on the probe)
Replaceable differential pressure module

Kimo
including temperature input for C310 transmitter Type: SPI2-100 The module has one separate temperature input (Type-K) (Temperature compensation possible) No zero point drift thanks to automatic zero point adjustment, which ensures good long-term stability. Measuring ranges: Pressure: +/- 100 Pa (other measuring ranges available) Resolution: 1 Pa High resolution option with 0.1 Pa Type: HRP Accuracy: ±0.2% Temperature: -200 ... 1300°C (depending on the probe)
including I2 option 11/15 kW, 110-500 V, 26/40 A, - / B Soft starter and stop device with adjustable voltage ramp Art.-No .: 8083.321 / 27
LEKTROMIK 11S2-27

Kimo
including I2 option 11/15 kW, 110-500 V, 26/40 A, - / B Soft starter and stop device with adjustable voltage ramp Art.-No .: 8083.321 / 27
incl. 100 mm vane probe Type: VT 210 L - set / graphic display up to 6 measurements simultaneously 2 external probe inputs 1 slot for modules Outputs for PC and IR printer radio probe option automatic probe detection Features: air velocity, volume flow, Measuring funnel function, temperature, humidity, speed, climate module Log function (1000 data records with 20,000 measurement points) Included: VT210 - Anemometer / Thermo-Hygrometer Vane probe SH-100 ( 100 mm diameter ) Air speed: 0.3....35 m/s Flow rate: 0...99999 m³/h Temperature: -20...+80 °C Handle with multifunction control button - CSM probe cable - Li-Ion battery block (up to 40 hours continuous operation) - USB adapter cable and power supply - Transport case - Calibration certificate Weight: about 500g
Anemometer / Thermo-Hygrometer

Kimo
incl. 100 mm vane probe Type: VT 210 L - set / graphic display up to 6 measurements simultaneously 2 external probe inputs 1 slot for modules Outputs for PC and IR printer radio probe option automatic probe detection Features: air velocity, volume flow, Measuring funnel function, temperature, humidity, speed, climate module Log function (1000 data records with 20,000 measurement points) Included: VT210 - Anemometer / Thermo-Hygrometer Vane probe SH-100 ( 100 mm diameter ) Air speed: 0.3....35 m/s Flow rate: 0...99999 m³/h Temperature: -20...+80 °C Handle with multifunction control button - CSM probe cable - Li-Ion battery block (up to 40 hours continuous operation) - USB adapter cable and power supply - Transport case - Calibration certificate Weight: about 500g
Inclined tube manometer Measuring range: 0 - 40 mmH2O including measuring liquid, blue (density = 1.86) Case and 1 m hose Item no .: 56-10549
MT 40 MMH2O

Kimo
Inclined tube manometer Measuring range: 0 - 40 mmH2O including measuring liquid, blue (density = 1.86) Case and 1 m hose Item no .: 56-10549
for differential pressure transmitters of the 210 / 310 series This function allows the measured Pressure signal as volume flow and air speed is shown in the display. In addition, the analog output signals / relay functions, are used for this function. Item no.: 56-24105
Flow function / SQR/3 unlock code

Kimo
for differential pressure transmitters of the 210 / 310 series This function allows the measured Pressure signal as volume flow and air speed is shown in the display. In addition, the analog output signals / relay functions, are used for this function. Item no.: 56-24105
for class 310 transmitter Type: SHDI-150 Stainless steel probe with stainless steel filter for relative humidity and temperature. Measuring range: 5 ... 95%RH and -40 ... +180°C Cable: white silicone cable, approx. 2 m long (Cable extensions available 5 and 10 m) Measuring probe: Ø 13 mm Probe length: 150mm Various filter caps available (optional) Sensor attachment / cable extension (optional) Calibration certificate (optional)
Interchangeable temperature/humidity probe

Kimo
for class 310 transmitter Type: SHDI-150 Stainless steel probe with stainless steel filter for relative humidity and temperature. Measuring range: 5 ... 95%RH and -40 ... +180°C Cable: white silicone cable, approx. 2 m long (Cable extensions available 5 and 10 m) Measuring probe: Ø 13 mm Probe length: 150mm Various filter caps available (optional) Sensor attachment / cable extension (optional) Calibration certificate (optional)
for all stationary devices of the 110 / 210 / 310 series With this software you have a quick and very easy option, transmitter, switch or Adjust display devices and change parameters. This saves time and costs.... The parameterization of the setpoints for each individual Switching and analogue outputs, alarm functions as well as the settings for the units and measuring ranges etc. that should be shown on the display easy and quick for everyone you want area can be adjusted. (With this software transmitters/switches All of them are equipped with dip switches Intermediate areas can be set that would otherwise would not be possible) For info: A graphical and tabular representation the measurement is also possible with this software Real time possible. The test function with which the analog outputs and the Relay functions can be tested. Would you like to record the measured values, trend curves create, our data loggers offer you one simple and suitable solution. DANGER: This software is used for transmitters without a display absolutely necessary to set up the devices. Delivery: Software USB stick incl. KIMO USB mini DIN cable Country of origin: France
LCC-S configuration software

Kimo
for all stationary devices of the 110 / 210 / 310 series With this software you have a quick and very easy option, transmitter, switch or Adjust display devices and change parameters. This saves time and costs.... The parameterization of the setpoints for each individual Switching and analogue outputs, alarm functions as well as the settings for the units and measuring ranges etc. that should be shown on the display easy and quick for everyone you want area can be adjusted. (With this software transmitters/switches All of them are equipped with dip switches Intermediate areas can be set that would otherwise would not be possible) For info: A graphical and tabular representation the measurement is also possible with this software Real time possible. The test function with which the analog outputs and the Relay functions can be tested. Would you like to record the measured values, trend curves create, our data loggers offer you one simple and suitable solution. DANGER: This software is used for transmitters without a display absolutely necessary to set up the devices. Delivery: Software USB stick incl. KIMO USB mini DIN cable Country of origin: France
Einbau der Optionen Art.-Nr.: 8360.000
OPTION Z

Kimo
Einbau der Optionen Art.-Nr.: 8360.000
Differential pressure transmitter Type: CP212-BO-R with display Pressure measuring range: -1000 / +1000 Pa (Optionally, the measured pressure signal can also be as air velocity and/or as volume flow be output with the SQR/3 function) Temperature input: Pt100 from -100 to +400°C Autozero: By key or autom. with solenoid valve Accuracy: +/- 0.5% of reading Power supply: 24V AC/DC 2 analogue outputs: 0-10 V or 4-20 mA / 0-20 mA 2 relay outputs PC interface: USB mini DIN Housing: ABS, IP 65 Weight: about 340g Country of origin: France Part.-Nr.: 56-25636
CP212-BO-R

Kimo
Differential pressure transmitter Type: CP212-BO-R with display Pressure measuring range: -1000 / +1000 Pa (Optionally, the measured pressure signal can also be as air velocity and/or as volume flow be output with the SQR/3 function) Temperature input: Pt100 from -100 to +400°C Autozero: By key or autom. with solenoid valve Accuracy: +/- 0.5% of reading Power supply: 24V AC/DC 2 analogue outputs: 0-10 V or 4-20 mA / 0-20 mA 2 relay outputs PC interface: USB mini DIN Housing: ABS, IP 65 Weight: about 340g Country of origin: France Part.-Nr.: 56-25636
differential pressure transmitter Type: CP112-AN without display Measuring range: -1000...+1000 Pa (intermediate ranges adjustable) Power supply: 24 VAC/DC active output: 0 - 10 V and 4 - 20 mA ( 3-4 wire ) Accuracy: ± 1.5% of meas. ± 3 Pa Interface: USB mini DIN cable Housing: ABS, IP 65 (Optional: parameterisation software LCC-S) Weight: about 150g Item no.: 56-23907
CP112-AN

Kimo
differential pressure transmitter Type: CP112-AN without display Measuring range: -1000...+1000 Pa (intermediate ranges adjustable) Power supply: 24 VAC/DC active output: 0 - 10 V and 4 - 20 mA ( 3-4 wire ) Accuracy: ± 1.5% of meas. ± 3 Pa Interface: USB mini DIN cable Housing: ABS, IP 65 (Optional: parameterisation software LCC-S) Weight: about 150g Item no.: 56-23907
Capacitor 4.7 μF Ramp extension Item no .: 8360.001
Option 4.7MF

Kimo
Capacitor 4.7 μF Ramp extension Item no .: 8360.001
Calibration / Temperature Type: CAL 3 PT TEMP STD (M) 3-point calibration at standard temperature by comparing a complete measuring chain. Possible measuring range from -100 to +1100 °C. Calibration points defined at: -20 / 50 / 100 °C. Supplied with calibration certificate and proof of conformity.
CAL 3 PT TEMP STD

Kimo
Calibration / Temperature Type: CAL 3 PT TEMP STD (M) 3-point calibration at standard temperature by comparing a complete measuring chain. Possible measuring range from -100 to +1100 °C. Calibration points defined at: -20 / 50 / 100 °C. Supplied with calibration certificate and proof of conformity.
Calibration / Humidity Type: CAL 3 PT RH% STD (M) Calibration in hygrometry at room temperature with temperature control any type of hygrometer. Possible measuring range from 5 to 98 %RH. 3 x calibration points: defined at: 11 / 44 / 85 %RH. Delivery: Calibration certificate and proof of conformity
CAL 3 PT RH% STD (M)

Kimo
Calibration / Humidity Type: CAL 3 PT RH% STD (M) Calibration in hygrometry at room temperature with temperature control any type of hygrometer. Possible measuring range from 5 to 98 %RH. 3 x calibration points: defined at: 11 / 44 / 85 %RH. Delivery: Calibration certificate and proof of conformity