"Kromschröder" markasına ait modeller;
84368012 Flame Warden For flame signalling, EU certified Series: For intermittent operation Mains voltage: 230 V~, 50/60 Hz Flame control: ionization Switch-off threshold: 2 micro A Response time after flame failure: 1 s Flame signal: 1 NC, 1 NO contact Flame Signal Strength: No output Connection plug: With screw terminals
FDU 510W1T2/1O1-0K1

Kromschröder
84368012 Flame Warden For flame signalling, EU certified Series: For intermittent operation Mains voltage: 230 V~, 50/60 Hz Flame control: ionization Switch-off threshold: 2 micro A Response time after flame failure: 1 s Flame signal: 1 NC, 1 NO contact Flame Signal Strength: No output Connection plug: With screw terminals
84331383 ignition transformer new order no. for 34331383 For high-voltage ignition of gas and oil burners High voltage 7.5kV Output current 12 mA at 50 Hz Duty cycle 100% Mains voltage 230 V~
TZI 7,5-12/100W

Kromschröder
84331383 ignition transformer new order no. for 34331383 For high-voltage ignition of gas and oil burners High voltage 7.5kV Output current 12 mA at 50 Hz Duty cycle 100% Mains voltage 230 V~
84331381 Ignition transformer For high-voltage ignition of gas and oil burners High voltage 5 kV Output current 15 mA at 50 Hz Duty cycle 100% Mains voltage 230 V~
34331381

Kromschröder
84331381 Ignition transformer For high-voltage ignition of gas and oil burners High voltage 5 kV Output current 15 mA at 50 Hz Duty cycle 100% Mains voltage 230 V~
84320305 UV flame detector For continuous operation to monitor gas burners in connection with Kromschröder burner controls BCU or PFU..U. Series 1 Thermal protection made of quartz glass Rp 1/2 internal thread M20 screw connection Mains voltage 100-230 V~, 50/60 Hz
UVC 1D0G1A

Kromschröder
84320305 UV flame detector For continuous operation to monitor gas burners in connection with Kromschröder burner controls BCU or PFU..U. Series 1 Thermal protection made of quartz glass Rp 1/2 internal thread M20 screw connection Mains voltage 100-230 V~, 50/60 Hz
84315200 UV probe For monitoring gas burners in intermittent mode Operation, EC type tested and certified in conjunction with magpie Kromschröder gas burner controls Series 10 Thermal protection made of quartz glass Rp 1/2 internal thread M20 screw connection
UVS 10D0G1

Kromschröder
84315200 UV probe For monitoring gas burners in intermittent mode Operation, EC type tested and certified in conjunction with magpie Kromschröder gas burner controls Series 10 Thermal protection made of quartz glass Rp 1/2 internal thread M20 screw connection
84315200 UV probe For monitoring gas burners in intermittent Operation, EC type tested and certified in connection with magpie Kromschröder automatic gas burners Series 10 Thermal protection made of quartz glass Rp 1/2 internal thread M20 screw connection
UVS 10D0G1

Kromschröder
84315200 UV probe For monitoring gas burners in intermittent Operation, EC type tested and certified in connection with magpie Kromschröder automatic gas burners Series 10 Thermal protection made of quartz glass Rp 1/2 internal thread M20 screw connection
84315200 UV probe For monitoring gas burners in intermittent Operation, EC type tested and certified in connection with magpie Kromschröder automatic gas burners Series 10 Thermal protection made of quartz glass Rp 1/2 internal thread M20 screw connection
UVS 10D0G1

Kromschröder
84315200 UV probe For monitoring gas burners in intermittent Operation, EC type tested and certified in connection with magpie Kromschröder automatic gas burners Series 10 Thermal protection made of quartz glass Rp 1/2 internal thread M20 screw connection
75426230 Spring for GBF 80 and VGBF 80 for outlet pressure changes for GBF 80 and VGBF 80, packed in a bag, with Additional plate for changed outlet pressure, Outlet pressure range 5 - 12.5 mbar
spring 5-12.5 mbar, -

Kromschröder
75426230 Spring for GBF 80 and VGBF 80 for outlet pressure changes for GBF 80 and VGBF 80, packed in a bag, with Additional plate for changed outlet pressure, Outlet pressure range 5 - 12.5 mbar
74970431
BR.Eins.k BR 165RB 35 (17)

Kromschröder
74970431
74960445
UV photo cell (P 578) for UVS accessories

Kromschröder
74960445
74922193 Spare parts pack consisting of membranes, O-rings and Insert-k. Stat. Commodity number 90329000 Country of origin: SK
VGBF 50..40

Kromschröder
74922193 Spare parts pack consisting of membranes, O-rings and Insert-k. Stat. Commodity number 90329000 Country of origin: SK
74215213 Actuator To submit rotating movements (0-90 °), for activity From gas and Air flaps, position feedback via external readable Position indicator, Protection class IP 65 50 series 50, with increased torque Duration 15 S/90 ° Network voltage 230 V ~, 50/60 Hz Torque 15 Nm Three-point step control Corpus potentiometer 1000 ohms
IC 50-15W15TR10

Kromschröder
74215213 Actuator To submit rotating movements (0-90 °), for activity From gas and Air flaps, position feedback via external readable Position indicator, Protection class IP 65 50 series 50, with increased torque Duration 15 S/90 ° Network voltage 230 V ~, 50/60 Hz Torque 15 Nm Three-point step control Corpus potentiometer 1000 ohms
72701260 Ring damper for air and flue gas For continuous control of a volume flow DN 50 Installation between two DIN flanges PU max. 300 mbar With manual adjustment Temperature range 450°C resounding
DKR 50Z03H450D

Kromschröder
72701260 Ring damper for air and flue gas For continuous control of a volume flow DN 50 Installation between two DIN flanges PU max. 300 mbar With manual adjustment Temperature range 450°C resounding
48115105 Nominal width: DN 80 /PN 16 according to DIN 30690-1 and DVGW Information G19 consisting of: 1 piece Refalit - gas seal, incl. WAZ HTB approval according to VP 401 up to 5 bar HTB approved including marking 8 hexagonal screws, nuts M16 14 washers, hardened hardness class 200 HV and 2 serrated lock washers, DIN 6798, incl. recommended tightening torques calculated according to DIN 30690-1
FMS 080-16 flange mounting kit (optional)

Kromschröder
48115105 Nominal width: DN 80 /PN 16 according to DIN 30690-1 and DVGW Information G19 consisting of: 1 piece Refalit - gas seal, incl. WAZ HTB approval according to VP 401 up to 5 bar HTB approved including marking 8 hexagonal screws, nuts M16 14 washers, hardened hardness class 200 HV and 2 serrated lock washers, DIN 6798, incl. recommended tightening torques calculated according to DIN 30690-1
47102525 Flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 25 m3/h, measuring range: 2.5-40 m3/h(b) Rp internal thread DN 25, E1: 10 pulses/m3, E200: 500 pulses/m3 pu max. 4 bar, for gas and air
QA 25R25-40

Kromschröder
47102525 Flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 25 m3/h, measuring range: 2.5-40 m3/h(b) Rp internal thread DN 25, E1: 10 pulses/m3, E200: 500 pulses/m3 pu max. 4 bar, for gas and air
230VAC 50Hz E.1149-009067 FW15AA, IP54, -20/+60C
BCU460-5/1W1GB

Kromschröder
230VAC 50Hz E.1149-009067 FW15AA, IP54, -20/+60C
220 Volt
VAS1-O/NW 88000112

Kromschröder
220 Volt
220 volt
VAD125/88003466

Kromschröder
220 volt
220 Volt
VAS1 – 25R/LW 88003481

Kromschröder
220 Volt
21802401 recuperative burner for gas for heating furnace systems Burner size: 2, rated output 60 kW Recuperator: With cast steel ribbed recuperator Recuperator length: 545 mm Use: With staged combustion Gas type: For natural gas Heating type: For radiant tube heating without ejector Burner head identification number: (33) Construction status: B- ECOMAX 2M545-SB/R-(33)B- Self recuperative burner for gas For heating of furnace systems Burner size: 2, rated capacity: 60 kW Recuperator: With cast steel ribbed tube recuperator Recuperator length: 545 mm Use: With staged combustion Gas type: For natural gas Type of heating: For radiant tube heating without eductor Burner head identifier: (33) Construction stage: B-
ECOMAX 2M545-SB/R-(33)B-

Kromschröder
21802401 recuperative burner for gas for heating furnace systems Burner size: 2, rated output 60 kW Recuperator: With cast steel ribbed recuperator Recuperator length: 545 mm Use: With staged combustion Gas type: For natural gas Heating type: For radiant tube heating without ejector Burner head identification number: (33) Construction status: B- ECOMAX 2M545-SB/R-(33)B- Self recuperative burner for gas For heating of furnace systems Burner size: 2, rated capacity: 60 kW Recuperator: With cast steel ribbed tube recuperator Recuperator length: 545 mm Use: With staged combustion Gas type: For natural gas Type of heating: For radiant tube heating without eductor Burner head identifier: (33) Construction stage: B-