"Kromschröder" markasına ait modeller;
Gas pressure switch For monitoring gas and air pressures, also for Biogas, with handwheel for switching point adjustment, can be used as '' pressure monitor special Bauart '', EC type-tested and certified Setting range 2.5-50 mbar Overpressure (gas / air), underpressure (air), differential pressure (Air-air) El. Connection with 4-pin plug, with socket Stat. Lot number 90262080 Country of origin: DE
DG 50U-6

Kromschröder
Gas pressure switch For monitoring gas and air pressures, also for Biogas, with handwheel for switching point adjustment, can be used as '' pressure monitor special Bauart '', EC type-tested and certified Setting range 2.5-50 mbar Overpressure (gas / air), underpressure (air), differential pressure (Air-air) El. Connection with 4-pin plug, with socket Stat. Lot number 90262080 Country of origin: DE
FOTOSEL
Uvc 101g1a

Kromschröder
FOTOSEL
For outputting rotary movements (0-90 °), for actuation of gas and Air flaps, position feedback via externally readable Position indicator, Protection class IP 65 Series 50, with increased torque Running time 60 s / 90 ° Mains voltage 230 V ~, 50/60 Hz Torque 30 Nm Three-point step control Feedback potentiometer 1000 Ohm Stat. Product number 85011010 Country of origin: DE
IC 50-60W30TR10

Kromschröder
For outputting rotary movements (0-90 °), for actuation of gas and Air flaps, position feedback via externally readable Position indicator, Protection class IP 65 Series 50, with increased torque Running time 60 s / 90 ° Mains voltage 230 V ~, 50/60 Hz Torque 30 Nm Three-point step control Feedback potentiometer 1000 Ohm Stat. Product number 85011010 Country of origin: DE
Flow meter For non-calibration Gas quantity metering, display of consumed Quantity, with pulse generators E1 and E200 Nominal flow rate: 400 m3/h Measuring range 32-650 m3/h(b) Intermediate flange DN 100, E1: 1 Imp/m3, E200: 187.5 Imp/m3 pu max. 16 bar QA400Z100-160 Flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 400 m3/h, measuring range: 32-650 m3/h(b) Intermediate flange DN 100, E1: 1 pulse/m3, E200: 187.5 pulses/m3 pu max. 16 bar
QA 400Z100-160-

Kromschröder
Flow meter For non-calibration Gas quantity metering, display of consumed Quantity, with pulse generators E1 and E200 Nominal flow rate: 400 m3/h Measuring range 32-650 m3/h(b) Intermediate flange DN 100, E1: 1 Imp/m3, E200: 187.5 Imp/m3 pu max. 16 bar QA400Z100-160 Flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 400 m3/h, measuring range: 32-650 m3/h(b) Intermediate flange DN 100, E1: 1 pulse/m3, E200: 187.5 pulses/m3 pu max. 16 bar
EINSTELLVENTIL
Rv 65/Nf02t60e

Kromschröder
EINSTELLVENTIL
DICHTUNGSREGLER
Tc410-10t

Kromschröder
DICHTUNGSREGLER
Compact unit Dreizler version With sieve, two safety valves and Servo pressure regulator to secure and Rules of atmospheric burners, Forced draft burners, Fan-assisted boilers, EC type tested and certified Size 30 Special variant Stat. Product number 84814090 Country of origin: DE
CG 30R03VW5CWZZ

Kromschröder
Compact unit Dreizler version With sieve, two safety valves and Servo pressure regulator to secure and Rules of atmospheric burners, Forced draft burners, Fan-assisted boilers, EC type tested and certified Size 30 Special variant Stat. Product number 84814090 Country of origin: DE
Burner control, 400 series On-site housing, for control, ignition and monitoring from impulse-controlled, modulating or stage-controlled Gas burners. For Continuous operation with ionization monitoring or UV monitoring with UV probe UVD. Intermittent operation with UV probe UVS. Display of the Program status, device parameters and Flame signal. Manual mode. Diagnosis and adjustment of the Device parameters over optical interface and PC software BCSoft. EU certified, AGA, FM, EAC and CSA approved, certified for systems up to SIL 3 (corresponds to PL e). Standard version Safety time start-up tSA: 10 s Safety time operation tSB: 1 s Air valve control Mains voltage: 230 V ~, 50/60 Hz Ignition transformer TZI 7.5-12 / 100 Stat. Product number 85371098 Country of origin: DE
Bcu 460-10/1lw3gbd2s3

Kromschröder
Burner control, 400 series On-site housing, for control, ignition and monitoring from impulse-controlled, modulating or stage-controlled Gas burners. For Continuous operation with ionization monitoring or UV monitoring with UV probe UVD. Intermittent operation with UV probe UVS. Display of the Program status, device parameters and Flame signal. Manual mode. Diagnosis and adjustment of the Device parameters over optical interface and PC software BCSoft. EU certified, AGA, FM, EAC and CSA approved, certified for systems up to SIL 3 (corresponds to PL e). Standard version Safety time start-up tSA: 10 s Safety time operation tSB: 1 s Air valve control Mains voltage: 230 V ~, 50/60 Hz Ignition transformer TZI 7.5-12 / 100 Stat. Product number 85371098 Country of origin: DE
BCU 460-10/1LW3GBD2S3 Burner control, 400 series On-site housing, for control, ignition and monitoring from impulse-controlled, modulating or stage-controlled Gas burners. For Continuous operation with ionization monitoring or UV monitoring with UV probe UVD. Intermittent operation with UV probe UVS. Display of the Program status, device parameters and Flame signal. Manual mode. Diagnosis and adjustment of the Device parameters over optical interface and PC software BCSoft. EU certified, AGA, FM, EAC and CSA approved, certified for systems up to SIL 3 (corresponds to PL e). Standard version Safety time start-up tSA: 10 s Safety time operation tSB: 1 s Air valve control Mains voltage: 230 V ~, 50/60 Hz Ignition transformer TZI 7.5-12 / 100 Stat. Product number 85371098 Country of origin: DE
88610183

Kromschröder
BCU 460-10/1LW3GBD2S3 Burner control, 400 series On-site housing, for control, ignition and monitoring from impulse-controlled, modulating or stage-controlled Gas burners. For Continuous operation with ionization monitoring or UV monitoring with UV probe UVD. Intermittent operation with UV probe UVS. Display of the Program status, device parameters and Flame signal. Manual mode. Diagnosis and adjustment of the Device parameters over optical interface and PC software BCSoft. EU certified, AGA, FM, EAC and CSA approved, certified for systems up to SIL 3 (corresponds to PL e). Standard version Safety time start-up tSA: 10 s Safety time operation tSB: 1 s Air valve control Mains voltage: 230 V ~, 50/60 Hz Ignition transformer TZI 7.5-12 / 100 Stat. Product number 85371098 Country of origin: DE
Automatic burner control replaces mat.no. 84620046 + 84620056 + 84620059, compatible Ignites and monitors gas burners, for continuous operation, Ad for Program status and flame signal strength, IP 54, EC type tested and certified, FM and CSA approved 200 series Ionization monitoring Restart after flame failure Start-up safety time: 5 s Safety time operation: 1 s Mains voltage 230 V ~, 50/60 Hz Integrated electronic ignition Stat. Lot number 90268020
IFD 244-5/1WI

Kromschröder
Automatic burner control replaces mat.no. 84620046 + 84620056 + 84620059, compatible Ignites and monitors gas burners, for continuous operation, Ad for Program status and flame signal strength, IP 54, EC type tested and certified, FM and CSA approved 200 series Ionization monitoring Restart after flame failure Start-up safety time: 5 s Safety time operation: 1 s Mains voltage 230 V ~, 50/60 Hz Integrated electronic ignition Stat. Lot number 90268020
Automatic burner control New construction stage. Function and terminal assignment remain the same. *** Only for replacement *** Ignites and controls gas burners, for intermittent operation, with ionization or UV control, single-electrode operation possible, multi-flame control possible, EC type-tested and certified For grounded mains Fault lock-out in the event of flame failure Safety time on start-up: 5 s Safety time during operation for V2: 1 s Safety time during operation for V1: 1 s Mains voltage: 220/240 V AC, 50/60 Hz Stat. Warennummer 90268020 Ursprungsland: DE
Ifs 110im-5/1/1t

Kromschröder
Automatic burner control New construction stage. Function and terminal assignment remain the same. *** Only for replacement *** Ignites and controls gas burners, for intermittent operation, with ionization or UV control, single-electrode operation possible, multi-flame control possible, EC type-tested and certified For grounded mains Fault lock-out in the event of flame failure Safety time on start-up: 5 s Safety time during operation for V2: 1 s Safety time during operation for V1: 1 s Mains voltage: 220/240 V AC, 50/60 Hz Stat. Warennummer 90268020 Ursprungsland: DE
Automatic burner control unit replaces Mat.No. 84620450, compatible Ignites and monitors gas burners, for continuous operation with ionization control, adjustable cut-off point, display for indicating program status and flame signal intensity, IP 54, EC type-tested and certified, FM and CSA approved Series 200 Ionization or UV control Immediate fault lock-out or restart in the event of flame failure, switchable Safety time on start-up: 10 s Safety time during operation: 1 s Mains voltage: 120 V AC, 50/60 Hz
IFD 258-10/1Q

Kromschröder
Automatic burner control unit replaces Mat.No. 84620450, compatible Ignites and monitors gas burners, for continuous operation with ionization control, adjustable cut-off point, display for indicating program status and flame signal intensity, IP 54, EC type-tested and certified, FM and CSA approved Series 200 Ionization or UV control Immediate fault lock-out or restart in the event of flame failure, switchable Safety time on start-up: 10 s Safety time during operation: 1 s Mains voltage: 120 V AC, 50/60 Hz
Air-pressure switch Switch housing drilled out (Rp1 / 8 connection) For monitoring of air and flue gas pressures, for overpressure, negative pressure and differential pressure, EC type tested and certified Adjustment range 0.2-3 mbar, can be used as "'pressure monitor of special design' ' Housing with screw terminals, threaded connection Rp 1/4 and hose connection with handwheel Electrical connection with screw terminals Blue Control Lamp for 220/240 V ~ DL 3A-3TZ Pressure switch for air switch housing on-drilled (Rp1 / 8 connection) For monitoring air and flue gas pressures, for positive Pressure, negative pressure and differential pressure, EC type-tested and certified Adjusting range: 0.2-3 mbar, can be used as '' special-design pressure switch '' Housing with screw terminals, Rp 1/4 threaded connection and tube connection with hand wheel Electrical connection via screw terminals Blue pilot lamp for 220/240 V AC Stat. Lot number 90262080 Country of origin: DE
Dl 3a-3tz

Kromschröder
Air-pressure switch Switch housing drilled out (Rp1 / 8 connection) For monitoring of air and flue gas pressures, for overpressure, negative pressure and differential pressure, EC type tested and certified Adjustment range 0.2-3 mbar, can be used as "'pressure monitor of special design' ' Housing with screw terminals, threaded connection Rp 1/4 and hose connection with handwheel Electrical connection with screw terminals Blue Control Lamp for 220/240 V ~ DL 3A-3TZ Pressure switch for air switch housing on-drilled (Rp1 / 8 connection) For monitoring air and flue gas pressures, for positive Pressure, negative pressure and differential pressure, EC type-tested and certified Adjusting range: 0.2-3 mbar, can be used as '' special-design pressure switch '' Housing with screw terminals, Rp 1/4 threaded connection and tube connection with hand wheel Electrical connection via screw terminals Blue pilot lamp for 220/240 V AC Stat. Lot number 90262080 Country of origin: DE
Air/gas ratio control with solenoid valve For safeguarding and control of the gas pressure, Class A pressure regulator to EN 88, Class A solenoid valve to EN 161, for gas, air and biologically produced methane, pu max. 500 mbar (7 psig), with pilot lamp, IP 65 Size: 1 Certification: EU certified Inlet: DN 25 (1'') Outlet: DN 25 (1'') Pipe connection: Rp internal thread Opening properties: Quick opening, quick closing Mains voltage: 230 V~, 50/60 Hz Electrical connection: M20 cable gland Valve seat: Normal Connection kit for air control pressure psa: 1 compression fitting, 2 pressure test points pd and psa Accessories, right: 2 screw plugs Accessories, left: 2 screw plugs
VAG 125R/NWAE

Kromschröder
Air/gas ratio control with solenoid valve For safeguarding and control of the gas pressure, Class A pressure regulator to EN 88, Class A solenoid valve to EN 161, for gas, air and biologically produced methane, pu max. 500 mbar (7 psig), with pilot lamp, IP 65 Size: 1 Certification: EU certified Inlet: DN 25 (1'') Outlet: DN 25 (1'') Pipe connection: Rp internal thread Opening properties: Quick opening, quick closing Mains voltage: 230 V~, 50/60 Hz Electrical connection: M20 cable gland Valve seat: Normal Connection kit for air control pressure psa: 1 compression fitting, 2 pressure test points pd and psa Accessories, right: 2 screw plugs Accessories, left: 2 screw plugs
air pressure switch For monitoring air and flue gas pressures, for overpressure, Vacuum and differential pressure, EU certified Setting range: 0.2-3 mbar, can be used as a "pressure switch". special Type'' Housing: With threaded connection Rp 1/4 and Hose connection with handwheel Electrical connection: With screw terminals Stat. Commodity number 90262080 Country of origin: DE
DL 3A-3

Kromschröder
air pressure switch For monitoring air and flue gas pressures, for overpressure, Vacuum and differential pressure, EU certified Setting range: 0.2-3 mbar, can be used as a "pressure switch". special Type'' Housing: With threaded connection Rp 1/4 and Hose connection with handwheel Electrical connection: With screw terminals Stat. Commodity number 90262080 Country of origin: DE
Actuator For Transmitting rotary movements (0-90 °), for Actuation of gas and air valves, position feedback via externally readable position indicator, enclosure IP 65 Series 50, with higher torque Running time: 60 s / 90 ° Mains voltage: 230 V AC, 50/60 Hz Torque: 30 Nm Continuous control
Ic 50-60w30e

Kromschröder
Actuator For Transmitting rotary movements (0-90 °), for Actuation of gas and air valves, position feedback via externally readable position indicator, enclosure IP 65 Series 50, with higher torque Running time: 60 s / 90 ° Mains voltage: 230 V AC, 50/60 Hz Torque: 30 Nm Continuous control
88600953
BCU 370WFEU0D3B1

Kromschröder
88600953
85311060 Gas engine valve For automatic shut-off, normally closed, slowly opening, fast closing, for natural gas, town gas, liquid gas and Air, too suitable for biogas and landfill gas, class A according to EN 161, EC type tested and certified DN 80 Flange according to ISO 7005 pu max. 1 bar Mains voltage 220/240 V ~, 50 Hz Valve housing AlSi Metal junction box with terminals, IP 54 Screw plugs in the entrance and exit Amount adjustment Stat. Product number 84814090 Country of origin: DE
VK 80F10T5A93D

Kromschröder
85311060 Gas engine valve For automatic shut-off, normally closed, slowly opening, fast closing, for natural gas, town gas, liquid gas and Air, too suitable for biogas and landfill gas, class A according to EN 161, EC type tested and certified DN 80 Flange according to ISO 7005 pu max. 1 bar Mains voltage 220/240 V ~, 50 Hz Valve housing AlSi Metal junction box with terminals, IP 54 Screw plugs in the entrance and exit Amount adjustment Stat. Product number 84814090 Country of origin: DE
48115105 Flange mounting kit Nominal width: DN 80 / PN 16 according to DIN 30690-1 and DVGW Information G19 consisting of: 1 pc Refalit gas seal, incl. WAZ HTB approval according to VP 401 HTB approved up to 5 bar incl. labeling 8 hexagon bolts, M16 nuts 14 U-washers, hardened, hardness class 200 HV and 2 serrated lock washers, DIN 6798, incl. recommendation of tightening torques calculated according to DIN 30690-1 Stat. Lot number: 90329000
FMS 080-16

Kromschröder
48115105 Flange mounting kit Nominal width: DN 80 / PN 16 according to DIN 30690-1 and DVGW Information G19 consisting of: 1 pc Refalit gas seal, incl. WAZ HTB approval according to VP 401 HTB approved up to 5 bar incl. labeling 8 hexagon bolts, M16 nuts 14 U-washers, hardened, hardness class 200 HV and 2 serrated lock washers, DIN 6798, incl. recommendation of tightening torques calculated according to DIN 30690-1 Stat. Lot number: 90329000
100-500 Mbar PRESOSTAT
Dg500b-3

Kromschröder
100-500 Mbar PRESOSTAT