"Mapro" markasına ait modeller;
Scope of delivery: · Single-stage side channel blower CL 98/1 G · Bare shaft with free shaft end · Without electric motor, coupling and base frame · Threaded flange at the inlet and outlet, IG 4 " · Condensate drain cock · Rubber buffers for installation · Complete assembly of the assembly, testing and painting according to our standard (Color: RAL 5010) ATEX certificate for category 2G for indoor use (Ex zone 1) · Identical to CL 98/1 G - S / No. 530115 B
Side channel blower CL 98/1 G

Mapro
Scope of delivery: · Single-stage side channel blower CL 98/1 G · Bare shaft with free shaft end · Without electric motor, coupling and base frame · Threaded flange at the inlet and outlet, IG 4 " · Condensate drain cock · Rubber buffers for installation · Complete assembly of the assembly, testing and painting according to our standard (Color: RAL 5010) ATEX certificate for category 2G for indoor use (Ex zone 1) · Identical to CL 98/1 G - S / No. 530115 B
Pipe bends at the entrance and exit, DN 100

Mapro
Technical Specifications; 2-stage blower in aluminum alloy Monoblock version with paper cartridge filter for suction, type F7 (supplied) suction silencer flap check valve, type VR6 electric motor, 2 poles kW 1.6-V 400/3 phase- Hz50 - IP54 direct connection to the machine body assembly, testing and painting (RAL 9006) machines according to standards 2006/42/EC low voltage 2014/35/EU electromagnetic compatibility 2014/30/EU
Side Channel Blower- CL 420 HS kw2,2 TF RB40-1/8 BU

Mapro
Technical Specifications; 2-stage blower in aluminum alloy Monoblock version with paper cartridge filter for suction, type F7 (supplied) suction silencer flap check valve, type VR6 electric motor, 2 poles kW 1.6-V 400/3 phase- Hz50 - IP54 direct connection to the machine body assembly, testing and painting (RAL 9006) machines according to standards 2006/42/EC low voltage 2014/35/EU electromagnetic compatibility 2014/30/EU
Side-channel blower two-stage side channel blower CL 2R8 electric motor 11 kW, 3-ph., 345-415/600-720 V, 50 Hz, 2-pole, IP55, ISO class. F, thermal contact 135° Silencer at the entrance Threaded flange at inlet and outlet, G 2 ½“ Rubber buffers for installation Complete assembly of the module, testing and painting according to our standard (Color: RAL 9006)
CL 2R8

Mapro
Side-channel blower two-stage side channel blower CL 2R8 electric motor 11 kW, 3-ph., 345-415/600-720 V, 50 Hz, 2-pole, IP55, ISO class. F, thermal contact 135° Silencer at the entrance Threaded flange at inlet and outlet, G 2 ½“ Rubber buffers for installation Complete assembly of the module, testing and painting according to our standard (Color: RAL 9006)
Side-channel blower Single-stage side channel blower CL 1R6 Electric motor 4.0 kW, 3-ph., 345-415/600-720 V, 50 Hz, 2-pole, IP55, ISO class. F Silencers at the inlet and outlet Threaded flange at the inlet and outlet, G 2“ Rubber buffers for installation Complete assembly of the module, testing and painting according to our standard (Color: RAL 9006)
CL 1R6

Mapro
Side-channel blower Single-stage side channel blower CL 1R6 Electric motor 4.0 kW, 3-ph., 345-415/600-720 V, 50 Hz, 2-pole, IP55, ISO class. F Silencers at the inlet and outlet Threaded flange at the inlet and outlet, G 2“ Rubber buffers for installation Complete assembly of the module, testing and painting according to our standard (Color: RAL 9006)
Side-channel blower Scope of delivery: Two-stage side channel blower CL 720-5K3 HS Electric motor 4.3 kW, 3-phase, 345-415/595-720 V, 50 Hz, 2-pole, IP54, insulation class F, with 125° thermal contact Silencer at the entrance Threaded flange at the inlet and outlet, G 2“ Rubber buffers for installation Complete assembly of the module, testing and painting according to our standard (Color: RAL 9006)
CL 720 5K3 HS

Mapro
Side-channel blower Scope of delivery: Two-stage side channel blower CL 720-5K3 HS Electric motor 4.3 kW, 3-phase, 345-415/595-720 V, 50 Hz, 2-pole, IP54, insulation class F, with 125° thermal contact Silencer at the entrance Threaded flange at the inlet and outlet, G 2“ Rubber buffers for installation Complete assembly of the module, testing and painting according to our standard (Color: RAL 9006)
side channel compressor Scope of delivery: · Single-stage side channel blower CL 98/1 G With free shaft end (bare-shaft) · Without base frame, coupling and electric motor Aluminum elbows at the inlet and outlet, DN 100 · Condensate drain cock · Rubber buffers for positioning · Complete assembly of the assembly, testing and painting to our standard (Colour: RAL 1021) · Certification of the entire assembly: o Inside: ATEx CE Ex II 2G Ex h IIB T3 Gb · Version identical to CL 98/1 G – S/No. 530115
CL 98/1 G – bare-shaft

Mapro
side channel compressor Scope of delivery: · Single-stage side channel blower CL 98/1 G With free shaft end (bare-shaft) · Without base frame, coupling and electric motor Aluminum elbows at the inlet and outlet, DN 100 · Condensate drain cock · Rubber buffers for positioning · Complete assembly of the assembly, testing and painting to our standard (Colour: RAL 1021) · Certification of the entire assembly: o Inside: ATEx CE Ex II 2G Ex h IIB T3 Gb · Version identical to CL 98/1 G – S/No. 530115
side channel compressor Scope of delivery: · Single-stage side channel blower CL 520-6K3 HS · Electric motor 4.0 kW, 3-ph., 400/690 V, 50 Hz, 2-pin, IP54, iso cl. F, thermal contact 125° · Inlet and outlet silencers · Threaded flange at the inlet and outlet, IG 2" · Complete assembly of the assembly, testing and painting to our standard (Colour: RAL 7032)
CL 520-6K3 HS

Mapro
side channel compressor Scope of delivery: · Single-stage side channel blower CL 520-6K3 HS · Electric motor 4.0 kW, 3-ph., 400/690 V, 50 Hz, 2-pin, IP54, iso cl. F, thermal contact 125° · Inlet and outlet silencers · Threaded flange at the inlet and outlet, IG 2" · Complete assembly of the assembly, testing and painting to our standard (Colour: RAL 7032)
side channel compressor Scope of delivery: · Single-stage side channel blower CL 720-5K3 HS · Electric motor 4.3 kW, 3-ph., 400/690 V, 50 Hz, 2-pin, IP54, iso cl. F, thermal contact 125° · Inlet and outlet silencers · Threaded flange at the inlet and outlet, IG 2" · Complete assembly of the assembly, testing and painting to our standard (Colour: RAL 7032)
CL 720-5K3 HS

Mapro
side channel compressor Scope of delivery: · Single-stage side channel blower CL 720-5K3 HS · Electric motor 4.3 kW, 3-ph., 400/690 V, 50 Hz, 2-pin, IP54, iso cl. F, thermal contact 125° · Inlet and outlet silencers · Threaded flange at the inlet and outlet, IG 2" · Complete assembly of the assembly, testing and painting to our standard (Colour: RAL 7032)
Side channel blower Single-stage side channel blower CL 60-7BU HS • Electric motor 4.0 kW, 3-ph., 200-240/345-416 V, 50 Hz, 2-pole, IP54, ISO class. F, thermal contact 125 °C • Silencers at the inlet and outlet • Threaded flange at inlet and outlet, G 2" • Complete assembly of the component, testing and painting according to our standard (Color: RAL 9006) Documentation: The delivery includes a printed operating and maintenance manual in German. The complete documentation, consisting of the operating and maintenance instructions, CE- Declaration of conformity and dimension sheet will be provided after delivery. Submitted electronically. Additional documents available upon request. Constructive features: • Direct-coupled design (monoblock), the impeller is mounted directly on the motor shaft • Housing halves and impeller are made of an aluminum alloy • Suitable for operation with a frequency converter if a PTC thermistor is present • Horizontal position Note: The air to be compressed should be free of water and dirt. For planning a setup in the Outdoors, a sufficiently large weather protection roof must be taken into account. We would also like to point out that the air passes through a filter before entering the compressor. needs to be cleaned. Applied standards: • 2006/42/EC - Machinery Directive • 2014/35/EU - Low Voltage • 2014/30/EU - Electromagnetic Compatibility
CL 60-7BU HS

Mapro
Side channel blower Single-stage side channel blower CL 60-7BU HS • Electric motor 4.0 kW, 3-ph., 200-240/345-416 V, 50 Hz, 2-pole, IP54, ISO class. F, thermal contact 125 °C • Silencers at the inlet and outlet • Threaded flange at inlet and outlet, G 2" • Complete assembly of the component, testing and painting according to our standard (Color: RAL 9006) Documentation: The delivery includes a printed operating and maintenance manual in German. The complete documentation, consisting of the operating and maintenance instructions, CE- Declaration of conformity and dimension sheet will be provided after delivery. Submitted electronically. Additional documents available upon request. Constructive features: • Direct-coupled design (monoblock), the impeller is mounted directly on the motor shaft • Housing halves and impeller are made of an aluminum alloy • Suitable for operation with a frequency converter if a PTC thermistor is present • Horizontal position Note: The air to be compressed should be free of water and dirt. For planning a setup in the Outdoors, a sufficiently large weather protection roof must be taken into account. We would also like to point out that the air passes through a filter before entering the compressor. needs to be cleaned. Applied standards: • 2006/42/EC - Machinery Directive • 2014/35/EU - Low Voltage • 2014/30/EU - Electromagnetic Compatibility
Scope of delivery: • Single-stage side channel compressor CL 80-6K3-Z HS • Electric motor 7.5 kW, 3-phase, 345-415/595-720 V, 50 Hz, 2-pole, IP54, insulation class F, thermal contact 125 °C • Silencer at the inlet and outlet • Threaded flange at the inlet and outlet, G 2“ ½ • Complete assembly of the module, testing and painting according to our standard (color: RAL 9006)
Side channel blower CL 80-6K3-Z HS

Mapro
Scope of delivery: • Single-stage side channel compressor CL 80-6K3-Z HS • Electric motor 7.5 kW, 3-phase, 345-415/595-720 V, 50 Hz, 2-pole, IP54, insulation class F, thermal contact 125 °C • Silencer at the inlet and outlet • Threaded flange at the inlet and outlet, G 2“ ½ • Complete assembly of the module, testing and painting according to our standard (color: RAL 9006)
Scope of delivery: • Single-stage side channel compressor CL 50/6BU HS • Electric motor 2.2 kW, 3-phase, 200-240/345-416 V, 50 Hz, 2-pole, IP54, insulation class F, thermal contact 125 °C • Silencer at the inlet and outlet • Threaded flange at the inlet and outlet, G 2" • Complete assembly of the module, testing and painting according to our standard (color: RAL 9006) 3 pcs filter insert C8C (paper) for CL 50 HS
side channel blower CL 50/6BU HS

Mapro
Scope of delivery: • Single-stage side channel compressor CL 50/6BU HS • Electric motor 2.2 kW, 3-phase, 200-240/345-416 V, 50 Hz, 2-pole, IP54, insulation class F, thermal contact 125 °C • Silencer at the inlet and outlet • Threaded flange at the inlet and outlet, G 2" • Complete assembly of the module, testing and painting according to our standard (color: RAL 9006) 3 pcs filter insert C8C (paper) for CL 50 HS
Scope of delivery: • Single-stage side channel compressor CL 40/6BU HS • Electric motor 1.1 kW, 3-phase, 200-240/345-416 V, 50 Hz, 2-pole, IP54, insulation class F, thermal contact 125 °C • Silencer at the inlet and outlet • Threaded flange at the inlet and outlet, G 1“ ½ • Complete assembly of the module, testing and painting according to our standard (color: RAL 9006) 3 pcs Filter insert C6C (paper) for CL 40 HS
side channel blower CL 40/6BU HS

Mapro
Scope of delivery: • Single-stage side channel compressor CL 40/6BU HS • Electric motor 1.1 kW, 3-phase, 200-240/345-416 V, 50 Hz, 2-pole, IP54, insulation class F, thermal contact 125 °C • Silencer at the inlet and outlet • Threaded flange at the inlet and outlet, G 1“ ½ • Complete assembly of the module, testing and painting according to our standard (color: RAL 9006) 3 pcs Filter insert C6C (paper) for CL 40 HS
Scope of delivery: · Single-stage side channel blower CL 50-6BU HS · Electric motor 2.2 kW, 3-ph., 230/400 V, 50 Hz, 2-pin, IP54, iso cl. F, thermal contact 125° · Inlet and outlet silencers · Threaded flange at the inlet and outlet, IG 2" · Complete assembly of the assembly, testing and painting to our standard (Colour: RAL 7032)
Side channel blower CL 50-6BU HS

Mapro
Scope of delivery: · Single-stage side channel blower CL 50-6BU HS · Electric motor 2.2 kW, 3-ph., 230/400 V, 50 Hz, 2-pin, IP54, iso cl. F, thermal contact 125° · Inlet and outlet silencers · Threaded flange at the inlet and outlet, IG 2" · Complete assembly of the assembly, testing and painting to our standard (Colour: RAL 7032)
komplett
CL 720 HS Blower

Mapro
komplett
Aluminum body Filter insert made of stainless steel, 100μ Length: 312mm Colour: RAL5010
Gasfilter, DN 80

Mapro
Aluminum body Filter insert made of stainless steel, 100μ Length: 312mm Colour: RAL5010
• Two-stage side channel compressor CL 520/6K3 HS • Electric motor 4.0 kW, 3-phase, 345-416/595-720 V, 50 Hz, 2-pole, IP54, insulation class F, thermal contact 125 °C • Silencer at the inlet and outlet • Threaded flange at the inlet and outlet, G 2" • Complete assembly of the module, testing and painting according to our standard (color: RAL 9006)
CL 520/6K3 HS

Mapro
• Two-stage side channel compressor CL 520/6K3 HS • Electric motor 4.0 kW, 3-phase, 345-416/595-720 V, 50 Hz, 2-pole, IP54, insulation class F, thermal contact 125 °C • Silencer at the inlet and outlet • Threaded flange at the inlet and outlet, G 2" • Complete assembly of the module, testing and painting according to our standard (color: RAL 9006)
· Aluminum body · Filter insert made of stainless steel, 100μ · Flange connections in DN 100
Gasfilter

Mapro
· Aluminum body · Filter insert made of stainless steel, 100μ · Flange connections in DN 100
MPF1

Mapro
MPF2

Mapro