"Mors Smitt" markasına ait modeller;
V29 socket: spring clamp terminal, wall / rail mount
V29 Socket

Mors Smitt
V29 socket: spring clamp terminal, wall / rail mount
Timing relay: Delay-on/off, 24V DC, 10 A, 1NC 3 C/O
Tdbe4-U201 0 - 30 Min / 0 - 30 Min

Mors Smitt
Timing relay: Delay-on/off, 24V DC, 10 A, 1NC 3 C/O
Timing relay: Delay-on, 24V DC, 10 A, 4 C/O
Tdb4-U201 0-120 Min

Mors Smitt
Timing relay: Delay-on, 24V DC, 10 A, 4 C/O
Timing relay voltage monitoring: Delay-on/off, 24V DC, 10 A, 4 C/O
Mtdv4-U201

Mors Smitt
Timing relay voltage monitoring: Delay-on/off, 24V DC, 10 A, 4 C/O
TIMING RELAY
Tddb-U201 3...30s

Mors Smitt
TIMING RELAY
SC RELAY: SC 044 110 5 G(4 N/C+4 N/O 110 VDC double coil latching relay) with socket (Alkyde compound)with locking spring (153879) COR NJ X* (Latchıng set reset relay (4NO+4NC) with double 110v dc coils complete with relay socket) with locking spring,SCHNEIDER
Mors Smith Sc 044 110 5 G With Socket (Cor Nj X*)

Mors Smitt
SC RELAY: SC 044 110 5 G(4 N/C+4 N/O 110 VDC double coil latching relay) with socket (Alkyde compound)with locking spring (153879) COR NJ X* (Latchıng set reset relay (4NO+4NC) with double 110v dc coils complete with relay socket) with locking spring,SCHNEIDER
Relay D-U200: 24 VDC, 4CO, 250V/10A, LED coil indicator
D-U201-L

Mors Smitt
Relay D-U200: 24 VDC, 4CO, 250V/10A, LED coil indicator
1.1. The overcurrent relay will be suitable for use inside the locomotive. 1.2. The nominal voltage of the primary circuit will be 1500 VAC, 50 Hz (maximum 1800 VAC). 1.3. The nominal current value of the primary circuit will be 800 A, 50 Hz. 1.4. The maximum current value will be 4000 A (100 ms). 1.5. Message receiving time will be less than 300 ms at 1200 A. 1.6. Receiving messages 1000 A (± 10%) 1.7. The drop will be less than 700 A. 1.8. There will be 1 NC (normally closed) and 1 NO (normally open) contact. 1.9. The rated voltage of the contacts will be 110 VDC (77 VDC - 137.5 VDC). 1:10. Contact values will be 0.3 ADC, 90 VDC and L / R = 40 ms.
1806st

Mors Smitt
1.1. The overcurrent relay will be suitable for use inside the locomotive. 1.2. The nominal voltage of the primary circuit will be 1500 VAC, 50 Hz (maximum 1800 VAC). 1.3. The nominal current value of the primary circuit will be 800 A, 50 Hz. 1.4. The maximum current value will be 4000 A (100 ms). 1.5. Message receiving time will be less than 300 ms at 1200 A. 1.6. Receiving messages 1000 A (± 10%) 1.7. The drop will be less than 700 A. 1.8. There will be 1 NC (normally closed) and 1 NO (normally open) contact. 1.9. The rated voltage of the contacts will be 110 VDC (77 VDC - 137.5 VDC). 1:10. Contact values will be 0.3 ADC, 90 VDC and L / R = 40 ms.
V23 socket

Mors Smitt
D-U204L

Mors Smitt
D-U201-Lw022

Mors Smitt
D-U201-Lw013

Mors Smitt
1491 St

Mors Smitt
Cu-U204-B 110 Vdc

Mors Smitt
D8--U204-Lq (110 Vdc)

Mors Smitt
D-U204-Q 110 Vdc

Mors Smitt
D-U204-Ql 110 Vdc

Mors Smitt
D-U307-Ekl

Mors Smitt
Umd-81-Mtdv4-U204-Kc 0,5s/05s 84/90 Vdc

Mors Smitt
Tdb4-U204 1-10s

Mors Smitt