"Multi Wing" markasına ait modeller;
Multi-Wing Fan - 42", 25,000 CFM - 1725 RPM
42/9-9/25/Al/5zl/P1 1-5/8/8/As

Multi Wing
Multi-Wing Fan - 42", 25,000 CFM - 1725 RPM
1hl 103105

Multi Wing
Impeller Diameter Tolerance: h14 according to DS/EN 20286-2 Bore Tolerance: H7 for bores up to ø48mm,G7 for bores from ø55mm & H8 for flange bores according to DS/EN 20286-2 Keyway Tolerance: Metric: Js9 according to BS 4235-1 (table 1&3); Inch: according to BS 46-1 (table 2) Balancing Tolerance: G 6,3 single-plane at 950 RPM according to ISO21940-11 All impellers are balanced with exception of 6,8 & 10 bladed type H with plastic blades Bolts & Nuts: Standard strength category is 8.8-Zn if no special requirement.
4ZG/PAG Fan Blade

Multi Wing
Impeller Diameter Tolerance: h14 according to DS/EN 20286-2 Bore Tolerance: H7 for bores up to ø48mm,G7 for bores from ø55mm & H8 for flange bores according to DS/EN 20286-2 Keyway Tolerance: Metric: Js9 according to BS 4235-1 (table 1&3); Inch: according to BS 46-1 (table 2) Balancing Tolerance: G 6,3 single-plane at 950 RPM according to ISO21940-11 All impellers are balanced with exception of 6,8 & 10 bladed type H with plastic blades Bolts & Nuts: Standard strength category is 8.8-Zn if no special requirement.
Fan Multi Wing 100299/A Example application: - Engine Cummins QSX15 CPL 2825
100299/A

Multi Wing
Fan Multi Wing 100299/A Example application: - Engine Cummins QSX15 CPL 2825
Attached part
200215 / B

Multi Wing
Attached part
100299/A

Multi Wing
800/8-8/45/PAG/7ZL/38/10/82/A

Multi Wing
1hr 103205 Fan

Multi Wing
We use the attached propeller in our project, we want to enlarge the propeller diameter for our new work, but we request that it meet the items listed below by enlarging the propeller diameter. The motor we use is 3 phase asynchronous 3000rpm; 90dB of sound is generated. Can you provide the propeller information that you can suggest suitable for these features? higher axial thrust, lower noise, Higher suction power It will be mounted in a bucket with a diameter of 80-90 cm.
New propeller

Multi Wing
We use the attached propeller in our project, we want to enlarge the propeller diameter for our new work, but we request that it meet the items listed below by enlarging the propeller diameter. The motor we use is 3 phase asynchronous 3000rpm; 90dB of sound is generated. Can you provide the propeller information that you can suggest suitable for these features? higher axial thrust, lower noise, Higher suction power It will be mounted in a bucket with a diameter of 80-90 cm.
NUR Lüfterflügel
100299/A

Multi Wing
NUR Lüfterflügel
A fan for Caterpillar 3512
100299/B

Multi Wing
A fan for Caterpillar 3512
1115157
3HL

Multi Wing
1115157
cutted for ???/4-8/35/?PPG/2HL/xxxx/A
blade 2HL/35/?PPG

Multi Wing
cutted for ???/4-8/35/?PPG/2HL/xxxx/A
4HL 105107

Multi Wing
4ZR 111815 / A Model

Multi Wing
KOD 4ZR 111815- D

Multi Wing
4hr 104907

Multi Wing
4HL 105107

Multi Wing
P3 HL 35

Multi Wing
1000/16-16/??/PAGgrey/7ZR/98.1/4x13/BC126/A

Multi Wing