"Persta" markasına ait modeller;
44.8 25/63 DN25 PN 63 - handwheel 14 Housing forged from 1.7335, housing seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 Flat cone made of 1.7335 Conical seat stellitated Sealing type flat seat Stuffing box packing: graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Length: 230 mm Entry: with welding socket according to EN12760 DN 25 Outlet: with welding socket according to EN12760 DN 25 Required opening torque: 19 Nm Required closing torque: 19 Nm with handwheel 180.00 mm designed according to EN12570 Design data: PN 63 according to DIN 2401 Test pressure (open): 95 bar(g) Painting: Base coat with Luberpox in a layer thickness of 30-40µ Top coat with Lubersil in a layer thickness of 30-40µ in the color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with inspection certificate according to EN 10204 / 3.1
Shut-off valve 200 AE

Persta
44.8 25/63 DN25 PN 63 - handwheel 14 Housing forged from 1.7335, housing seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 Flat cone made of 1.7335 Conical seat stellitated Sealing type flat seat Stuffing box packing: graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Length: 230 mm Entry: with welding socket according to EN12760 DN 25 Outlet: with welding socket according to EN12760 DN 25 Required opening torque: 19 Nm Required closing torque: 19 Nm with handwheel 180.00 mm designed according to EN12570 Design data: PN 63 according to DIN 2401 Test pressure (open): 95 bar(g) Painting: Base coat with Luberpox in a layer thickness of 30-40µ Top coat with Lubersil in a layer thickness of 30-40µ in the color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with inspection certificate according to EN 10204 / 3.1

44.2 50/63 DN50 PN 63 - handwheel Housing forged from 1.7335, housing seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 Flat cone made of 1.7335 Conical seat stellitated Sealing type flat seat Stuffing box packing: graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Length: 250 mm Entry: with welding end for pipe: 60.30 x 3.20 mm Joint shape according to EN12627 Figure 2 Type B Da/Di according to EN12627 Exit: with welding end for pipe: 60.30 x 3.20 mm Joint shape according to EN12627 Figure 2 Type B Da/Di according to EN12627 Required opening torque: 38 Nm Required closing torque: 38 Nm with handwheel 180.00 mm designed according to EN12570 Design data: PN 63 according to EN 12516-1 Test pressure (open): 95 bar(g) Painting: Base coat with Luberpox in a layer thickness of 30-40µ Top coat with Lubersil in a layer thickness of 30-40µ in the color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with inspection certificate according to EN 10204 / 3.1
Shut-off valve 200 AE

Persta
44.2 50/63 DN50 PN 63 - handwheel Housing forged from 1.7335, housing seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 Flat cone made of 1.7335 Conical seat stellitated Sealing type flat seat Stuffing box packing: graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Length: 250 mm Entry: with welding end for pipe: 60.30 x 3.20 mm Joint shape according to EN12627 Figure 2 Type B Da/Di according to EN12627 Exit: with welding end for pipe: 60.30 x 3.20 mm Joint shape according to EN12627 Figure 2 Type B Da/Di according to EN12627 Required opening torque: 38 Nm Required closing torque: 38 Nm with handwheel 180.00 mm designed according to EN12570 Design data: PN 63 according to EN 12516-1 Test pressure (open): 95 bar(g) Painting: Base coat with Luberpox in a layer thickness of 30-40µ Top coat with Lubersil in a layer thickness of 30-40µ in the color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with inspection certificate according to EN 10204 / 3.1
44.1 50/63 DN50 PN 63 - handwheel Housing forged from 1.7335, housing seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4122 Flat cone made of 1.7335 Conical seat stellitated Sealing type flat seat Stuffing box packing: graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Length: 300 mm Entry: Flange PN 63 according to EN 1092-1, sealing strip form B2 Outlet: Flange PN 63 according to EN 1092-1, sealing strip form B2 Required opening torque: 38 Nm Required closing torque: 38 Nm with handwheel 180.00 mm designed according to EN12570 Design data: PN 63 according to DIN EN 1092-1 Test pressure (open): 94.5 bar(g) Painting: Base coat with Luberpox in a layer thickness of 30-40µ Top coat with Lubersil in a layer thickness of 30-40µ in the color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with inspection certificate according to EN 10204 / 3.1
Shut-off valve 200 AE

Persta
44.1 50/63 DN50 PN 63 - handwheel Housing forged from 1.7335, housing seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4122 Flat cone made of 1.7335 Conical seat stellitated Sealing type flat seat Stuffing box packing: graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Length: 300 mm Entry: Flange PN 63 according to EN 1092-1, sealing strip form B2 Outlet: Flange PN 63 according to EN 1092-1, sealing strip form B2 Required opening torque: 38 Nm Required closing torque: 38 Nm with handwheel 180.00 mm designed according to EN12570 Design data: PN 63 according to DIN EN 1092-1 Test pressure (open): 94.5 bar(g) Painting: Base coat with Luberpox in a layer thickness of 30-40µ Top coat with Lubersil in a layer thickness of 30-40µ in the color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with inspection certificate according to EN 10204 / 3.1
4 pieces= 1 set
Pos.4 axial bearing washer - Art.: 106330

Persta
4 pieces= 1 set
21.1 15/100 Attachment valve • 200 AE 21.1 15/100 PERSTA shut-off valve Housing forged from 1.0460, hard armored housing seat Clip lid forged from 1.0460 Lid Gasket: Graphite Foil Cover screws/nuts: 1.7225/1.1181 with rotating, rising spindle made of 1.4021 Flat cone made of 1.4021 Tapered seat inductively hardened Type of sealing flat seat Stuffing box packing: Graphite sleeve Stuffing box screws/nuts: 1.7225/1.1181 Direction of pressure: under the cone Overall length: 210 mm Inlet: Flange PN 160 according to EN 1092-1, raised face form B2 Outlet: Flange PN 160 according to EN 1092-1, raised face form B2 Required opening torque: 35 Nm Required closing torque: 35 Nm with handwheel O 180.00 mm Design data: PN 100 according to DIN EN 1092-1 Paintwork: standard painting Substrate cleanliness level SA 2.5 Top coat = Luxoral Aqua Primer matt 1 comp. Flow primer based on alkyd resins with active anti-corrosion pigments Colour: PERSTA blue (similar to RAL 5007) Dry film thickness: approx. 30 - 50 mμ Paint manufacturer: Mäder Lacke Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure module H. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
Aufsatz-Ventil 200 AE

Persta
21.1 15/100 Attachment valve • 200 AE 21.1 15/100 PERSTA shut-off valve Housing forged from 1.0460, hard armored housing seat Clip lid forged from 1.0460 Lid Gasket: Graphite Foil Cover screws/nuts: 1.7225/1.1181 with rotating, rising spindle made of 1.4021 Flat cone made of 1.4021 Tapered seat inductively hardened Type of sealing flat seat Stuffing box packing: Graphite sleeve Stuffing box screws/nuts: 1.7225/1.1181 Direction of pressure: under the cone Overall length: 210 mm Inlet: Flange PN 160 according to EN 1092-1, raised face form B2 Outlet: Flange PN 160 according to EN 1092-1, raised face form B2 Required opening torque: 35 Nm Required closing torque: 35 Nm with handwheel O 180.00 mm Design data: PN 100 according to DIN EN 1092-1 Paintwork: standard painting Substrate cleanliness level SA 2.5 Top coat = Luxoral Aqua Primer matt 1 comp. Flow primer based on alkyd resins with active anti-corrosion pigments Colour: PERSTA blue (similar to RAL 5007) Dry film thickness: approx. 30 - 50 mμ Paint manufacturer: Mäder Lacke Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure module H. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
20 / 100 DN20 PERSTA shut-off valve Housing forged from 1.0460, hard armored housing seat Clip lid forged from 1.0460 Lid Gasket: Graphite Foil Cover screws/nuts: 1.7225/1.1181 with rotating, rising spindle made of 1.4021 Flat cone made of 1.4021 Tapered seat inductively hardened Type of sealing flat seat Stuffing box packing: Graphite sleeve Stuffing box screws/nuts: 1.7225/1.1181 Direction of pressure: under the cone Overall length: 230 mm Inlet: Flange PN 100 according to EN 1092-1, raised face form B2 Outlet: Flange PN 100 according to EN 1092-1, raised face form B2 Required opening torque: 22 Nm Required closing torque: 22 Nm with handwheel Ø 180.00 mm designed according to EN12570 Design data: PN 100 (Vr <=50) according to EN 1092-1 -2013 Test pressure (open): 150 bar(g) Paintwork: Top coat with Luxoral Aqua Primer matt in a layer thickness of 30-50μ in the color RAL 5007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure module H. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
Absperrventil 200 AE 21.1

Persta
20 / 100 DN20 PERSTA shut-off valve Housing forged from 1.0460, hard armored housing seat Clip lid forged from 1.0460 Lid Gasket: Graphite Foil Cover screws/nuts: 1.7225/1.1181 with rotating, rising spindle made of 1.4021 Flat cone made of 1.4021 Tapered seat inductively hardened Type of sealing flat seat Stuffing box packing: Graphite sleeve Stuffing box screws/nuts: 1.7225/1.1181 Direction of pressure: under the cone Overall length: 230 mm Inlet: Flange PN 100 according to EN 1092-1, raised face form B2 Outlet: Flange PN 100 according to EN 1092-1, raised face form B2 Required opening torque: 22 Nm Required closing torque: 22 Nm with handwheel Ø 180.00 mm designed according to EN12570 Design data: PN 100 (Vr <=50) according to EN 1092-1 -2013 Test pressure (open): 150 bar(g) Paintwork: Top coat with Luxoral Aqua Primer matt in a layer thickness of 30-50μ in the color RAL 5007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure module H. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
105829 2 pieces = 1 set
Pos.5 axial needle roller and cage assembly – item

Persta
105829 2 pieces = 1 set
+ Electric drive AUMA-MATIC type SAR10.2-F10-B1-22-D400/50 (Control actuator AUMA NORM SAR10.2-F10-B1-22-400/50-6-8-10.1-11-22.5 with AUMA MATIC AM 01.1-41.10 Wiring diagram : MSP111700---F28E1 - TPA00R1AA-0C1-000) + Attachment valve in straight form made of 1.7357, seats stellite flange drilled Sealing strip according to EN 1092-1 form B2 design data PN 63 according to DIN 2401 Activity handwheel
Attachment valve - 200 AE 34.1 80/63 + SAR10

Persta
+ Electric drive AUMA-MATIC type SAR10.2-F10-B1-22-D400/50 (Control actuator AUMA NORM SAR10.2-F10-B1-22-400/50-6-8-10.1-11-22.5 with AUMA MATIC AM 01.1-41.10 Wiring diagram : MSP111700---F28E1 - TPA00R1AA-0C1-000) + Attachment valve in straight form made of 1.7357, seats stellite flange drilled Sealing strip according to EN 1092-1 form B2 design data PN 63 according to DIN 2401 Activity handwheel
GLOBE VALVE 1''#900,SW,ASTM A 182 F22,+480 °C

Persta
808GJ-21.2-L0113

Persta
700JJ-44.2

Persta
700JJ-21.2

Persta
640AA-11.2

Persta
240MT-21.2

Persta
200JM42.2/STL

Persta
200BE-21.1

Persta
200BN-21.1

Persta
200AE-21.2/KS-STL2

Persta
200AE21.1

Persta
Packing set Burgmann Art.: 154585

Persta