Pulsar Process MeasurementUltrasonic sensors with integrated temperature compensation for connection to evaluation devices of the NivuMaster series Type: P25, measuring range: 0.5 to 25m, cable length: 30m, sensor material: Valox
Pulsar Process MeasurementUltrasonic sensors with integrated temperature compensation for connection to evaluation devices of the NivuMaster series Type: P15, measuring range: 0.5 to 15m, Cable length: 20m, sensor material: Valox
Pulsar Process MeasurementUltrasonic sensors with integrated temperature compensation for connection to evaluation devices of the NivuMaster series Type: P06, measuring range: 0.3 to 6m, cable length 5m, sensor material: Valox
Pulsar Process MeasurementUltrasonic compact Doppler sensor for OCM F and OCM FR flow meters Wedge combination sensor for measuring flow velocity (Doppler) and fill level (integrated pressure measuring cell) PLEASE NOTE: We strongly recommend using the following for this order Use pressure equalization element (ZUB0DAE). In the event of an error due to the missing item, such as... For example, moisture or dust in the capillary tube, takes over NIVUS GmbH offers no guarantee. no ex-approval Cable length 10 m, for connection to OCM F and OCM FR for Sensor type KP, cable end pre-assembled Design: Wedge sensor
Pulsar Process MeasurementPressure equalization element with optical self-monitoring for Connection or cable extension of flow velocity or particle concentration sensors with pressure measuring cell in Ex- or non-Ex area to stationary transmitters such as NF7, NF6, N75, NP8, OCM F, OCM FR, OCM Pro etc. Consisting of a painted metal junction box (Aluminum die-cast) including clamps, pressure equalization plugs and clutch as well as a large air filter for absorption of the Humidity to protect the components installed in the sensor Pressure measuring cell. (When extending with cables other than NIVUS in hazardous areas) (The permissible inductances and capacitances must be observed!)
Pulsar Process MeasurementOCM flow transmitter for full and partial filling of Pipes, canals and channels. Measurement of flow velocity using ultrasound Signal evaluation via Doppler method. Design: Type F for different pipe and duct profiles. 1 x v sensor, 4 x DE, 5 x DA, 1 x AE (2-wire), 2 x AE (ext. Level and setpoint), 3 x AA, integrated 3-point step controller Design: Wall-mounted enclosure Power supply: 24 V DC +/- 15 %
Pulsar Process MeasurementOCM flow transmitter for full and partial filling of Pipes, canals and channels. Measurement of flow velocity using ultrasound Signal evaluation via Doppler method Design: Type F for different pipe and duct profiles. 1 x v sensor, 4 x DE, 5 x DA, 1 x AE (2-wire), 2 x AE (ext. Level and setpoint), 3 x AA, integrated 3-point step controller Design: Wall-mounted enclosure Power supply: 100-240 V AC, 47-63 Hz
Pulsar Process MeasurementModel: 2983333
Pulsar Process MeasurementLevel monitoring sensor system IMP6 lite
Pulsar Process MeasurementItem code: 20-1318
Pulsar Process Measurement2Wire IP66 PG11 cable Gland SS 316L Ultrasonic
Pulsar Process Measurement
