"Rotork" markasına ait modeller;
YOUNG TECH Lock-Up Valve Requests can be made directly via Valve Side Equipment - Lock-Up Valve YT-430S. YT-400_405_430_435 - Page 6
YT-430S

Rotork
YOUNG TECH Lock-Up Valve Requests can be made directly via Valve Side Equipment - Lock-Up Valve YT-430S. YT-400_405_430_435 - Page 6
volume booster Type YT-310 Material: Die-cast aluminum maximum pressure range: 10 bar maximum outlet pressure: 7 bar Input/output pressure ratio 1:1 Flow capacity CV: 4.98 Inlet/Outlet: NPT 3/4" Control input NPT 1/4" Temperature range -20° to +70°C
VB-YT-310N1

Rotork
volume booster Type YT-310 Material: Die-cast aluminum maximum pressure range: 10 bar maximum outlet pressure: 7 bar Input/output pressure ratio 1:1 Flow capacity CV: 4.98 Inlet/Outlet: NPT 3/4" Control input NPT 1/4" Temperature range -20° to +70°C
Voltage 380 VAC Torque(Nm):81 Speed(Rpm):36 Flange:F10
IQ12

Rotork
Voltage 380 VAC Torque(Nm):81 Speed(Rpm):36 Flange:F10
Voltage 380 VAC Torque(Nm):34 Speed(Rpm):36 Flange:F10
IQ10

Rotork
Voltage 380 VAC Torque(Nm):34 Speed(Rpm):36 Flange:F10
Voltage 380 VAC Torque(Nm):108 Speed(Rpm):24 Flange:F10
IQ18

Rotork
Voltage 380 VAC Torque(Nm):108 Speed(Rpm):24 Flange:F10
Voltage 24VDC Torque(Nm):34 Speed(Rpm):24 Flange:F10
IQD 10

Rotork
Voltage 24VDC Torque(Nm):34 Speed(Rpm):24 Flange:F10
Type YT-300 Material: die-cast aluminum max. supply pressure: 1MPa (10 bar) Max. signal/outlet pressure: 0.7 MPa (7 bar) Inlet/outlet pressure ratio: 1:1 Flow Capacity (Cv ): Output = 1.32 outlet = 1.19 In/Out Connection: 1/4" NPT Signal connection: 1/4" NPT Ambient temperature: -20oC => + 70oC
VB-YT-300N1

Rotork
Type YT-300 Material: die-cast aluminum max. supply pressure: 1MPa (10 bar) Max. signal/outlet pressure: 0.7 MPa (7 bar) Inlet/outlet pressure ratio: 1:1 Flow Capacity (Cv ): Output = 1.32 outlet = 1.19 In/Out Connection: 1/4" NPT Signal connection: 1/4" NPT Ambient temperature: -20oC => + 70oC
THREE PHASE ELECTRIC ACTUATOR
Iq40 F25 B4 [ii 2 Gd Exd Iic T4] 72rpm 400/3/50

Rotork
THREE PHASE ELECTRIC ACTUATOR
The originally delivered gearbox is an IW5 MK1. This type is no longer available. We therefore offer you the successor model MK 2. The originally delivered gearbox had a reduction of 120:1, a max. input torque of 93 Nm and a MA of 48. The max. possible output torque was 4447 Nm. The offered gearbox has a reduction of 192:1, a max. input torque of 110 Nm and a MA of 61. The max. possible output torque is 6670 Nm. The higher reduction increases the stroke time (depending on the rpm of the actuator). Please clarify with your customer if the new performance is ok. The offered gearbox is only primed (as the originally delivered gearbox). Painting is possible on request at no extra charge.
IWHT5/IR1 192:1 Fig. B1 Orient. West F10 IP F14 OP

Rotork
The originally delivered gearbox is an IW5 MK1. This type is no longer available. We therefore offer you the successor model MK 2. The originally delivered gearbox had a reduction of 120:1, a max. input torque of 93 Nm and a MA of 48. The max. possible output torque was 4447 Nm. The offered gearbox has a reduction of 192:1, a max. input torque of 110 Nm and a MA of 61. The max. possible output torque is 6670 Nm. The higher reduction increases the stroke time (depending on the rpm of the actuator). Please clarify with your customer if the new performance is ok. The offered gearbox is only primed (as the originally delivered gearbox). Painting is possible on request at no extra charge.
The originally delivered gearbox is an IW4 MK1. This type is no longer available. We therefore offer you the successor model MK 2. The originally delivered gearbox had a reduction of 70:1, a max. input torque of 88 Nm and a MA of 23. The max. possible output torque was 2650 Nm. The offered gearbox has a reduction of 92:1, a max. input torque of 96 Nm and a MA of 30. The max. possible output torque is 2900 Nm. The higher reduction increases the operating time (depending on the rpm of the actuator). Please clarify with your customer if the new performance is ok. The offered gearbox is supplied in standard paint finish (as the originally delivered gearbox). The drive sleeve is unmachined.
IW46/IR1 92:1 Fig. B1 Orient. West F10 IP F14 OP

Rotork
The originally delivered gearbox is an IW4 MK1. This type is no longer available. We therefore offer you the successor model MK 2. The originally delivered gearbox had a reduction of 70:1, a max. input torque of 88 Nm and a MA of 23. The max. possible output torque was 2650 Nm. The offered gearbox has a reduction of 92:1, a max. input torque of 96 Nm and a MA of 30. The max. possible output torque is 2900 Nm. The higher reduction increases the operating time (depending on the rpm of the actuator). Please clarify with your customer if the new performance is ok. The offered gearbox is supplied in standard paint finish (as the originally delivered gearbox). The drive sleeve is unmachined.
SS AISI 316L Disc: SS304-SS316L Centric Type, PN16, Body Seat:NBR
3"-BUTTERFLY VALVE Body

Rotork
SS AISI 316L Disc: SS304-SS316L Centric Type, PN16, Body Seat:NBR
SS AISI 316L Disc: SS304-SS316L Centric Type, PN16, Body Seat:NBR
4"-BUTTERFLY VALVE Body

Rotork
SS AISI 316L Disc: SS304-SS316L Centric Type, PN16, Body Seat:NBR
Solenoid 7700 230/50 - 240/60
7700

Rotork
Solenoid 7700 230/50 - 240/60
SMART ELECTROPNEUMATIC POSITIONER for pneumatic linear drive D= double acting I= ATEX 4=lever type 100-150mm 2= thread cable gland M20 / air connection: NPT1/4" 0= no communication 1= 4-20 mA feedback F= fail freeze Single weight: 2 kg
SR-YT-2500LDI420F

Rotork
SMART ELECTROPNEUMATIC POSITIONER for pneumatic linear drive D= double acting I= ATEX 4=lever type 100-150mm 2= thread cable gland M20 / air connection: NPT1/4" 0= no communication 1= 4-20 mA feedback F= fail freeze Single weight: 2 kg
RWS100
20’’ ball valve

Rotork
RWS100
ROTORK PNEUMATIC ACTUATOR, FAIL CLOSE
Gp085s335ac3

Rotork
ROTORK PNEUMATIC ACTUATOR, FAIL CLOSE
ROTARY ACTUATOR 2.5AMP 120V 50/60HZ
Sm-5120-0099

Rotork
ROTARY ACTUATOR 2.5AMP 120V 50/60HZ
Replacement sealing set for Pneumatic rotary actuator RC270 / 280 contains: - Tube of lubricant Part no. 3: 2x O-ring Part no. 6: 2x O-ring Part no. 9: 2x guide element Part no. 12: 2x O-ring Part no. 14: 2x guide tape Part no. 18: 1x O-ring Part no. 28: 2x O-ring Part no. 31: 1x circlip, top Part no. 32: 1x central disk Part no. 33: 1x sliding washer, above Part no. 38: 1x O-ring Part no. 39: 1x sliding washer, below Part no. 40: 1x retaining ring, below Temperature range: -20 ° C to + 80 ° C Customs tariff number: 84129080 Country of origin: Sweden Single weight: 0.4 kg
PA-RC-DS-270-280

Rotork
Replacement sealing set for Pneumatic rotary actuator RC270 / 280 contains: - Tube of lubricant Part no. 3: 2x O-ring Part no. 6: 2x O-ring Part no. 9: 2x guide element Part no. 12: 2x O-ring Part no. 14: 2x guide tape Part no. 18: 1x O-ring Part no. 28: 2x O-ring Part no. 31: 1x circlip, top Part no. 32: 1x central disk Part no. 33: 1x sliding washer, above Part no. 38: 1x O-ring Part no. 39: 1x sliding washer, below Part no. 40: 1x retaining ring, below Temperature range: -20 ° C to + 80 ° C Customs tariff number: 84129080 Country of origin: Sweden Single weight: 0.4 kg
positioner Type YT-1000R for double-acting pneumatic drives Setting range: 0-90° Input signal: 4...20 mA, Temperature range: -20° to +60°C, without explosion protection incl. Namur console Connections: NPT thread Customs tariff number: 84812090 Country of origin: Korea, Republic of (South) Single weight: 1.5 kg
SR-YT1000RDN532S00

Rotork
positioner Type YT-1000R for double-acting pneumatic drives Setting range: 0-90° Input signal: 4...20 mA, Temperature range: -20° to +60°C, without explosion protection incl. Namur console Connections: NPT thread Customs tariff number: 84812090 Country of origin: Korea, Republic of (South) Single weight: 1.5 kg
Pneumatic swivel drive Swivel range: 0 ° - 90 ° Scotch Yoke principle, single-acting Safety position CLOSED: Spring relaxed, clockwise, 087 PSI Housing: anodized aluminum; Shaft: chromated steel Connection according to ISO / DIN F14 Inside square: 36 x 36 mm pneumatic connection: R 1/4 " Pressure range up to 10.0 bar (g) Temperature range: -20 ° C to + 80 ° C Manufacturer: Rotork GmbH Manufacturer item no .: 173218/1024599 Customs tariff number: 84123900 Country of origin: Sweden Single weight: 45 kg
PA-RC-270-SR 087

Rotork
Pneumatic swivel drive Swivel range: 0 ° - 90 ° Scotch Yoke principle, single-acting Safety position CLOSED: Spring relaxed, clockwise, 087 PSI Housing: anodized aluminum; Shaft: chromated steel Connection according to ISO / DIN F14 Inside square: 36 x 36 mm pneumatic connection: R 1/4 " Pressure range up to 10.0 bar (g) Temperature range: -20 ° C to + 80 ° C Manufacturer: Rotork GmbH Manufacturer item no .: 173218/1024599 Customs tariff number: 84123900 Country of origin: Sweden Single weight: 45 kg