"Tensometric" markasına ait modeller;
Radial force - sensor Nominal load: 200N
Typ: M-1391-Nh

Tensometric
Radial force - sensor Nominal load: 200N
Load cell
M1355 Nh 2 24volt 500n

Tensometric
Load cell
S240555

Tensometric
S90C-20-5-6-1-1-1-9 Rated load: 20N; built-in measuring amplifier; Operating voltage: 24V DC; Output signal: 0-10V at 0-100% of rated load; Measuring direction: train with potentiometer for zero point and gain adjustment; 10m connection cable fixed; PDF instruction manual
STAK 1390-C

Tensometric
S90C-20-5-6-1-1-1-9 Rated load: 20N; built-in measuring amplifier; Operating voltage: 24V DC; Output signal: 0-10V at 0-100% of rated load; Measuring direction: train with potentiometer for zero point and gain adjustment; 10m connection cable fixed; PDF instruction manual
RADIAL FORCE TRANSDUCER Type: M-1392 / CO / A6 // RADIAL FORCE MEASURING SENSOR M-1392 / CO / A6 Nominal load: 10N bearing axis: D = 6mm; built-in measuring amplifier; Operating voltage 24V DC; Output signal: 0-10V, at 0-100% of the nominal load; with potentiometer for setting the zero point and the Calibration; Connection cable permanently installed, 5m. Incl. Operating instructions via email PDF.
M-1392/CO/A6

Tensometric
RADIAL FORCE TRANSDUCER Type: M-1392 / CO / A6 // RADIAL FORCE MEASURING SENSOR M-1392 / CO / A6 Nominal load: 10N bearing axis: D = 6mm; built-in measuring amplifier; Operating voltage 24V DC; Output signal: 0-10V, at 0-100% of the nominal load; with potentiometer for setting the zero point and the Calibration; Connection cable permanently installed, 5m. Incl. Operating instructions via email PDF.
RADIAL FORCE TRANSDUCER Type: M-1355-NH // RADIAL FORCE MEASURING SENSOR Type: M-1355-NH Nominal load: 200N; Bearing axis: D = 10mm, g6x23.5mm; Drawing: Z.9919530; built-in measuring amplifier; Operating voltage: 24V DC; Output signal: + -0-10V at + -0-100% of the nominal load; with potentiometer for setting the zero point and the Calibration; Connection cable permanently attached, 3m; Incl. Operating instructions via email PDF, calculation tables. Final test according to test report DIN EN 10204: 2004 (D) carried out.
M-1355-NH

Tensometric
RADIAL FORCE TRANSDUCER Type: M-1355-NH // RADIAL FORCE MEASURING SENSOR Type: M-1355-NH Nominal load: 200N; Bearing axis: D = 10mm, g6x23.5mm; Drawing: Z.9919530; built-in measuring amplifier; Operating voltage: 24V DC; Output signal: + -0-10V at + -0-100% of the nominal load; with potentiometer for setting the zero point and the Calibration; Connection cable permanently attached, 3m; Incl. Operating instructions via email PDF, calculation tables. Final test according to test report DIN EN 10204: 2004 (D) carried out.
RADIAL FORCE TRANSDUCER 1355-300-4-3-1-1 Rated load: 300N Bearing axis: D=12g6x25.5mm; built-in measuring amplifier; Operating voltage: 24V DC; Output signal: +-0-10V at +-0-100% of rated load; with potentiometer for setting the zero point and calibration at the cable output; Connection cable permanently attached, 3m; including PDF instruction manual, calculation tables. Final test according to factory certificate DIN EN 10204:2004 (D)
M-1355-NH1

Tensometric
RADIAL FORCE TRANSDUCER 1355-300-4-3-1-1 Rated load: 300N Bearing axis: D=12g6x25.5mm; built-in measuring amplifier; Operating voltage: 24V DC; Output signal: +-0-10V at +-0-100% of rated load; with potentiometer for setting the zero point and calibration at the cable output; Connection cable permanently attached, 3m; including PDF instruction manual, calculation tables. Final test according to factory certificate DIN EN 10204:2004 (D)
Alternative position RADIAL FORCE TRANSDUCER Type: M-1355-NH1 // RADIAL FORCE MEASURING SENSOR Type: M-1355-NH1 Serial no .: will be assigned after production Nominal load: 200N; Bearing axis: D = 10mm, g6x23.5mm; Drawing: 1355-1-100-A01A-0282; built-in measuring amplifier; Operating voltage: 24V DC; Output signal: + -0-10V at + -0-100% of the nominal load; with potentiometer for setting the zero point and the Calibration at the cable outlet; Connection cable permanently attached, 3m; Incl. PDF operating instructions, calculation tables. Final test according to test report DIN EN 10204: 2004 (D) carried out.
M-1355-NH1

Tensometric
Alternative position RADIAL FORCE TRANSDUCER Type: M-1355-NH1 // RADIAL FORCE MEASURING SENSOR Type: M-1355-NH1 Serial no .: will be assigned after production Nominal load: 200N; Bearing axis: D = 10mm, g6x23.5mm; Drawing: 1355-1-100-A01A-0282; built-in measuring amplifier; Operating voltage: 24V DC; Output signal: + -0-10V at + -0-100% of the nominal load; with potentiometer for setting the zero point and the Calibration at the cable outlet; Connection cable permanently attached, 3m; Incl. PDF operating instructions, calculation tables. Final test according to test report DIN EN 10204: 2004 (D) carried out.
M1355-Nh

Tensometric
M-1355-Nh

Tensometric
Cf-Comp-Pro-C-E

Tensometric
Cf-Comp-Pro

Tensometric
4142

Tensometric
Handy-Tens Lc-20n-1 (3121)

Tensometric
Lc 1121

Tensometric
Cf-Comp-Pro-E

Tensometric
1125-E

Tensometric
M 1355- Nh-2 1000 N

Tensometric
M-1355-Nh-2

Tensometric
3114-D

Tensometric