"United Electric Controls" markasına ait modeller;
Safety pressure switch 100 series Model: H100-218 Adjustable switching point in the range of: -1…0 bar Switch point hysteresis: 33.9…67.7 mbar Test pressure: 2.1 bar Overpressure safe up to: 0.2 bar Process connection: 1/4" NPT (female) made of brass nickel-plated, model 218 with stainless steel spring Phosphor bronze bellows, soldered Housing: die-cast aluminum; Epoxy powder coating Switches: Microswitches as single-pole changeover (SPDT) Switching capacity: standard 15A at 125/250/480 VAC and 1A inductive at 24…30 VDC Electrical connection: 1/2" NPT (female); 2 pre-punched 7/8" holes
Model: H100-218

United Electric Controls
Safety pressure switch 100 series Model: H100-218 Adjustable switching point in the range of: -1…0 bar Switch point hysteresis: 33.9…67.7 mbar Test pressure: 2.1 bar Overpressure safe up to: 0.2 bar Process connection: 1/4" NPT (female) made of brass nickel-plated, model 218 with stainless steel spring Phosphor bronze bellows, soldered Housing: die-cast aluminum; Epoxy powder coating Switches: Microswitches as single-pole changeover (SPDT) Switching capacity: standard 15A at 125/250/480 VAC and 1A inductive at 24…30 VDC Electrical connection: 1/2" NPT (female); 2 pre-punched 7/8" holes
Safety differential pressure switch 120-Series P/N: J120K-540-M201-M446-M400-M405-QC1 Switching point adjustment: internal Switching point adjustable in the range: 0.2 psi…7 " wcd / 0.5 bar…17.4 mbar Switching point hysteresis: 0.05 "wc…0.6 "wc / 0.1 mbar…1.5 mbar Maximum working pressure: 200 psi / 13.8 bar Maximum overpressure: 400 psi / 27.6 bar Process connection: Two 1/8" NPT (female) from aluminum Sensor: Buna N membrane and seal Notes: N/A Housing: Die cast aluminum, epoxy powder coated; gasketed; cover lock; internal set point lock; aluminum nameplate; protection class NEMA4X / IP66 Switch: 1 SPDT Switching capacity: 15A 125/250/480 VAC resistive (default), 2A @ 30VDC, 1A @ 48VDC, 0.5A @ 125 VDC Electrical connection: two 3/4" NPT E/C; terminal block standard Options M201: Factory switching point setting of a Switch; pressure and rising/falling! M446: Stainless steel tag plate (please specify text!) M400: SIL2 approval and marking for 120-, 12- and 100-Series (not with all options combinable) M405: Marking Ex ia according to ATEX QC1: Declaration of Conformity with Quality Control and calibration certificate XY630: Distributor code
J120K-540-M201-M446-M400-M405-QC1

United Electric Controls
Safety differential pressure switch 120-Series P/N: J120K-540-M201-M446-M400-M405-QC1 Switching point adjustment: internal Switching point adjustable in the range: 0.2 psi…7 " wcd / 0.5 bar…17.4 mbar Switching point hysteresis: 0.05 "wc…0.6 "wc / 0.1 mbar…1.5 mbar Maximum working pressure: 200 psi / 13.8 bar Maximum overpressure: 400 psi / 27.6 bar Process connection: Two 1/8" NPT (female) from aluminum Sensor: Buna N membrane and seal Notes: N/A Housing: Die cast aluminum, epoxy powder coated; gasketed; cover lock; internal set point lock; aluminum nameplate; protection class NEMA4X / IP66 Switch: 1 SPDT Switching capacity: 15A 125/250/480 VAC resistive (default), 2A @ 30VDC, 1A @ 48VDC, 0.5A @ 125 VDC Electrical connection: two 3/4" NPT E/C; terminal block standard Options M201: Factory switching point setting of a Switch; pressure and rising/falling! M446: Stainless steel tag plate (please specify text!) M400: SIL2 approval and marking for 120-, 12- and 100-Series (not with all options combinable) M405: Marking Ex ia according to ATEX QC1: Declaration of Conformity with Quality Control and calibration certificate XY630: Distributor code
Safety differential pressure switch 120-Series J120K-540-M201 Safety differential pressure switch 120-Series P/N: J120K-540-M201 Switching point adjustment: internal Switching point adjustable in the range: 0.2 psi…7 " wcd / 0.5 bar…17.4 mbar Switching point hysteresis: 0.05 "wc…0.6 "wc / 0.1 mbar…1.5 mbar Maximum working pressure: 200 psi / 13.8 bar Maximum overpressure: 400 psi / 27.6 bar Process connection: Two 1/8" NPT (female) from aluminum Sensor: Buna N membrane and seal Notes: N/A Housing: Die cast aluminum, epoxy powder coated; gasketed; cover lock; internal set point lock; aluminum nameplate; protection class NEMA4X / IP66 Switch: 1 SPDT Switching capacity: 15A 125/250/480 VAC resistive (default), 2A @ 30VDC, 1A @ 48VDC, 0.5A @ 125 VDC Electrical connection: two 3/4" NPT E/C; terminal block standard Options M201: Factory switching point setting of a Switch; pressure and rising/falling!
A00011023

United Electric Controls
Safety differential pressure switch 120-Series J120K-540-M201 Safety differential pressure switch 120-Series P/N: J120K-540-M201 Switching point adjustment: internal Switching point adjustable in the range: 0.2 psi…7 " wcd / 0.5 bar…17.4 mbar Switching point hysteresis: 0.05 "wc…0.6 "wc / 0.1 mbar…1.5 mbar Maximum working pressure: 200 psi / 13.8 bar Maximum overpressure: 400 psi / 27.6 bar Process connection: Two 1/8" NPT (female) from aluminum Sensor: Buna N membrane and seal Notes: N/A Housing: Die cast aluminum, epoxy powder coated; gasketed; cover lock; internal set point lock; aluminum nameplate; protection class NEMA4X / IP66 Switch: 1 SPDT Switching capacity: 15A 125/250/480 VAC resistive (default), 2A @ 30VDC, 1A @ 48VDC, 0.5A @ 125 VDC Electrical connection: two 3/4" NPT E/C; terminal block standard Options M201: Factory switching point setting of a Switch; pressure and rising/falling!
Pressure Switches, 120 Series Model: J120-701-1010-M540 Type J120, single switch with internal adjustment, dual conduits (cont.) Adjustable Set Point Range: 103,4 mbar…2,1 bar Deadband: 68,9 mbar…0,1 bar Over Range Pressure: 34,5 bar Proof Pressure: 68,9 bar Enclosure: Die cast aluminum, epoxy powder coated; gasketed; cover lock Buna N diaphragm and O-Ring with nickel-plated brass 1/4” NPT (female) pressure connection Electrical Rating: 15A 125/250/480 VAC resistive (standard), 2A @ 30 VDC, 1A @ 48 VDC, 0.5A @ 125 VDC Electrical Connection: two 3/4" NPT E/C; terminal block standard Options 1010: DPDT switch 10A 125/250 VAC resistive. 0.5A, 125 VDC; 0.25A, 250 VDC resistive. Deadband and minimum set point will increase. M540: Viton® wetted parts with standard pressure connection. Deadbands and low end of range may increase.
Model: J120-701-1010-M540

United Electric Controls
Pressure Switches, 120 Series Model: J120-701-1010-M540 Type J120, single switch with internal adjustment, dual conduits (cont.) Adjustable Set Point Range: 103,4 mbar…2,1 bar Deadband: 68,9 mbar…0,1 bar Over Range Pressure: 34,5 bar Proof Pressure: 68,9 bar Enclosure: Die cast aluminum, epoxy powder coated; gasketed; cover lock Buna N diaphragm and O-Ring with nickel-plated brass 1/4” NPT (female) pressure connection Electrical Rating: 15A 125/250/480 VAC resistive (standard), 2A @ 30 VDC, 1A @ 48 VDC, 0.5A @ 125 VDC Electrical Connection: two 3/4" NPT E/C; terminal block standard Options 1010: DPDT switch 10A 125/250 VAC resistive. 0.5A, 125 VDC; 0.25A, 250 VDC resistive. Deadband and minimum set point will increase. M540: Viton® wetted parts with standard pressure connection. Deadbands and low end of range may increase.
pressure switch
H100-612 1010 M540

United Electric Controls
pressure switch
One Series Smart Transmitter-Switch 1XTXSW: Loop powered 24 VDC HART® transmitters 2 programmable limit relays Max. supply / output signal: 2-wire 20 - 40 VDC @ 21mA / Loop powered 4-20mA analog output with HART® version 7 Switching capacity (SPDT): SW1 & SW2: 0-280 VAC & VDC @ 0.1A derates 8% per 10°C > 21°C IAW Switching Rating (SPDT): 0-30 VDC @ 0.020 A MOSFET Minimum switching capacity: 0mA Consumption idle state: 0.01 mA Ambient temperature: -40…85 °C Housing: Polyester coated 4X/IP66 housing made of aluminum alloy 360 Connection: 3/4" NPT female thread, Die-cast aluminum Cover: Polyester coated aluminum with tempered glass insert Sensor P12: overpressure - welded membrane off 316L stainless steel, process connection 1/2" NPT internal thread, piezoresistive Silicon Strain Gauge 0.25mL Silicone oil filling Max. media temperature: -40…+125 °C Measuring and monitoring range: 0...30 psig / 0...2.1 bar Over-pressure safe up to: 60 psig / 4.1 bar options QC1: Additional quality control with test certificate
1XTXSW-P12-QC1

United Electric Controls
One Series Smart Transmitter-Switch 1XTXSW: Loop powered 24 VDC HART® transmitters 2 programmable limit relays Max. supply / output signal: 2-wire 20 - 40 VDC @ 21mA / Loop powered 4-20mA analog output with HART® version 7 Switching capacity (SPDT): SW1 & SW2: 0-280 VAC & VDC @ 0.1A derates 8% per 10°C > 21°C IAW Switching Rating (SPDT): 0-30 VDC @ 0.020 A MOSFET Minimum switching capacity: 0mA Consumption idle state: 0.01 mA Ambient temperature: -40…85 °C Housing: Polyester coated 4X/IP66 housing made of aluminum alloy 360 Connection: 3/4" NPT female thread, Die-cast aluminum Cover: Polyester coated aluminum with tempered glass insert Sensor P12: overpressure - welded membrane off 316L stainless steel, process connection 1/2" NPT internal thread, piezoresistive Silicon Strain Gauge 0.25mL Silicone oil filling Max. media temperature: -40…+125 °C Measuring and monitoring range: 0...30 psig / 0...2.1 bar Over-pressure safe up to: 60 psig / 4.1 bar options QC1: Additional quality control with test certificate
One Series Smart Transmitter-Switch 1XTXSW: Loop powered 24 VDC HART® transmitters 2 programmable limit relays Max. supply / output signal: 2-wire 20 - 40 VDC @ 21mA / Loop powered 4-20mA analog output with HART® version 7 Switching capacity (SPDT): SW1 & SW2: 0-280 VAC & VDC @ 0.1A derates 8% per 10°C > 21°C IAW Switching Rating (SPDT): 0-30 VDC @ 0.020 A MOSFET Minimum switching capacity: 0mA Consumption idle state: 0.01 mA Ambient temperature: -40…85 °C Display readability: -12...70 °C Housing: Polyester coated 4X/IP66 housing made of aluminum alloy 360 Connection: 3/4" NPT female thread, Die-cast aluminum Cover: Polyester coated aluminum with tempered glass insert Sensor P16: overpressure - welded membrane off 316L stainless steel, process connection 1/2" NPT internal thread, piezoresistive Silicon Strain Gauge 0.25mL Silicone oil filling Max. media temperature: -40…+125 °C Measuring and monitoring range: 0...500 psig / 0...34.47 bar Over pressure safe to: 1000 psig / 68.9 bar
1XTXSW-P16-QC1

United Electric Controls
One Series Smart Transmitter-Switch 1XTXSW: Loop powered 24 VDC HART® transmitters 2 programmable limit relays Max. supply / output signal: 2-wire 20 - 40 VDC @ 21mA / Loop powered 4-20mA analog output with HART® version 7 Switching capacity (SPDT): SW1 & SW2: 0-280 VAC & VDC @ 0.1A derates 8% per 10°C > 21°C IAW Switching Rating (SPDT): 0-30 VDC @ 0.020 A MOSFET Minimum switching capacity: 0mA Consumption idle state: 0.01 mA Ambient temperature: -40…85 °C Display readability: -12...70 °C Housing: Polyester coated 4X/IP66 housing made of aluminum alloy 360 Connection: 3/4" NPT female thread, Die-cast aluminum Cover: Polyester coated aluminum with tempered glass insert Sensor P16: overpressure - welded membrane off 316L stainless steel, process connection 1/2" NPT internal thread, piezoresistive Silicon Strain Gauge 0.25mL Silicone oil filling Max. media temperature: -40…+125 °C Measuring and monitoring range: 0...500 psig / 0...34.47 bar Over pressure safe to: 1000 psig / 68.9 bar
Model: H100-192 Adjustable Set Point Range: 15…300 psi / 1,0…20,7 bar Deadband: 3…25 psi / 0,2…1,7 bar Proof Pressure: 2500 psi / 172,4 bar Over Range Pressure: 1500 psi / 103,4 bar Process Connection: 1/2” NPT (female) pressure connection Diaphragm: Welded 316 stainless steel diaphragm Enclosure: Die cast aluminum, epoxy powder coated, gasketed, captive cover screws Enclosure Classification: Enclosure type 4X Switch Output: One SPDT snap action switch; switch may be wired “normally open” or “normally closed” Electrical Rating: 15A 125/250/480 VAC resistive Electrical Connection: 1/2” NPT (female); Two 7/8” diameter knockouts
Pressure Switch 100 Series

United Electric Controls
Model: H100-192 Adjustable Set Point Range: 15…300 psi / 1,0…20,7 bar Deadband: 3…25 psi / 0,2…1,7 bar Proof Pressure: 2500 psi / 172,4 bar Over Range Pressure: 1500 psi / 103,4 bar Process Connection: 1/2” NPT (female) pressure connection Diaphragm: Welded 316 stainless steel diaphragm Enclosure: Die cast aluminum, epoxy powder coated, gasketed, captive cover screws Enclosure Classification: Enclosure type 4X Switch Output: One SPDT snap action switch; switch may be wired “normally open” or “normally closed” Electrical Rating: 15A 125/250/480 VAC resistive Electrical Connection: 1/2” NPT (female); Two 7/8” diameter knockouts
MEDIA: NATURAL (FUEL) GAS / NITROGEN, ADJUSTABLE OPERATING RANGE: 0.6- 20.7BAR, ADJUSTABLE DEADBAND/HYSTERESIS, PROOF PRESSURE: 68,9BAR EXPLOSION-PROOF: EX II 1 G EX IA IIC T6 GA, ELECT.CONTACT CONFIGURATION: SPDT, ELECT.CONTACT RATING: 15A @ 125/250/480VAC, DIAPHRAM MATERIAL: 316L STAINLESS STEEL, PROCESS CONNECTION: ½" NFT FEMALE, BAF-PSAL3.43"
J120-15836-M405

United Electric Controls
MEDIA: NATURAL (FUEL) GAS / NITROGEN, ADJUSTABLE OPERATING RANGE: 0.6- 20.7BAR, ADJUSTABLE DEADBAND/HYSTERESIS, PROOF PRESSURE: 68,9BAR EXPLOSION-PROOF: EX II 1 G EX IA IIC T6 GA, ELECT.CONTACT CONFIGURATION: SPDT, ELECT.CONTACT RATING: 15A @ 125/250/480VAC, DIAPHRAM MATERIAL: 316L STAINLESS STEEL, PROCESS CONNECTION: ½" NFT FEMALE, BAF-PSAL3.43"
H100-705 M540 2.1..68.9 BAR

United Electric Controls
J120K-540

United Electric Controls
SW PRESS,UE,12SHSN6F

United Electric Controls
SWITCH,PRESS

United Electric Controls
24-012

United Electric Controls
J120-194 XY430 1195 5.5..117.2BAR

United Electric Controls
P/N:H100-612 1010 M540 XY430 8.6.206BAR

United Electric Controls
H100-702-M540

United Electric Controls
H100-521

United Electric Controls
J402-612

United Electric Controls
J120-194-1195

United Electric Controls