"Warex Valve" markasına ait modeller;
Shaft seal set DKZ 110/103 / 110APS / 103APS suitable for DN 50 - DN 100 O-rings made of NBR
3671

Warex Valve
Shaft seal set DKZ 110/103 / 110APS / 103APS suitable for DN 50 - DN 100 O-rings made of NBR
Sealing sleeve made of Buna CB black suitable for DKZ 110 / DN 100
59D

Warex Valve
Sealing sleeve made of Buna CB black suitable for DKZ 110 / DN 100
sealing element of NBR white suitable for DKZ 110 APS / DN 350 suitable for food, correspond to European regulation (EC) No. 1935/2004
59APSD

Warex Valve
sealing element of NBR white suitable for DKZ 110 APS / DN 350 suitable for food, correspond to European regulation (EC) No. 1935/2004
sealing element of NBR white suitable for DKZ 110 APS / DN 300 suitable for food, correspond to European regulation (EC) No. 1935/2004
59APSD

Warex Valve
sealing element of NBR white suitable for DKZ 110 APS / DN 300 suitable for food, correspond to European regulation (EC) No. 1935/2004
DN 125 Overall length: 44 mm - AT 0with built-in pneum. Rotary drive Type: AT 60. DR - double acting - required control pressure: 6 bar - 566a with relinquished el./pneum. Positioner Manufacturer: PMV, type: EP 5 single and double acting Input signal: 4 ... 20 mA Degree of protection: IP 66 with relinquished Supply air filter - 5μ Fabr. ITV, type. FIL, connection G 1/4 " ====== The butterfly valve offered is to be checked with regard to the design.
5434

Warex Valve
DN 125 Overall length: 44 mm - AT 0with built-in pneum. Rotary drive Type: AT 60. DR - double acting - required control pressure: 6 bar - 566a with relinquished el./pneum. Positioner Manufacturer: PMV, type: EP 5 single and double acting Input signal: 4 ... 20 mA Degree of protection: IP 66 with relinquished Supply air filter - 5μ Fabr. ITV, type. FIL, connection G 1/4 " ====== The butterfly valve offered is to be checked with regard to the design.
Butterfly valve, type DKZ110 DN 350 Installation length 67 mm For clamping between flanges according to EN 1092, PN 10 Silumin housing with grounding connection Flap disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher grade Shaft sealing using O-rings Shaft bearing in brass - bushing Sealing sleeve made of Buna CB black conductive. replaceable within the housing Other attachments: Pneumatic rotary actuator AT 600 DR double-acting Required control pressure 6.0 bar 5/2-way solenoid valve function Norgren 2623077.3047 230 V AC, 50/60 Hz / Voltage tolerance: +/- 10% IP 65, with manual override Cat. II 3 G Ex nA IIC T5 Gc Cat. II 3 D Ex tc IIIC T=95°C Dc Limit switch box with 2 sensors P+F SC3.5-N0-BU 2-wire, NAMUR, normally closed (NC) with LED, 8 V, IP 67 built into the housing (Vestamid) and wired to a terminal block for the position indicator "Open + Closed" Cat. II 2G Ex ia IIC T6 Gb Cat. II 2D Ex ia IIIC T80°C Db -25°C ≤ Ta ≤ 70°C Initiators usable up to SIL 2, according to EN 61508, in accordance with Manufacturer's specification P + F
WX2000 DKZ110 DN 350

Warex Valve
Butterfly valve, type DKZ110 DN 350 Installation length 67 mm For clamping between flanges according to EN 1092, PN 10 Silumin housing with grounding connection Flap disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher grade Shaft sealing using O-rings Shaft bearing in brass - bushing Sealing sleeve made of Buna CB black conductive. replaceable within the housing Other attachments: Pneumatic rotary actuator AT 600 DR double-acting Required control pressure 6.0 bar 5/2-way solenoid valve function Norgren 2623077.3047 230 V AC, 50/60 Hz / Voltage tolerance: +/- 10% IP 65, with manual override Cat. II 3 G Ex nA IIC T5 Gc Cat. II 3 D Ex tc IIIC T=95°C Dc Limit switch box with 2 sensors P+F SC3.5-N0-BU 2-wire, NAMUR, normally closed (NC) with LED, 8 V, IP 67 built into the housing (Vestamid) and wired to a terminal block for the position indicator "Open + Closed" Cat. II 2G Ex ia IIC T6 Gb Cat. II 2D Ex ia IIIC T80°C Db -25°C ≤ Ta ≤ 70°C Initiators usable up to SIL 2, according to EN 61508, in accordance with Manufacturer's specification P + F
Butterfly valve with pnumatic actuator ,solenoıd valve ,switch box
DKZ 110/DN 100

Warex Valve
Butterfly valve with pnumatic actuator ,solenoıd valve ,switch box

5119.APS DN 350 face to face: 78 mm AT600 fitted with pneumatic actuator, type: AT 600.DR - double acting - air supply necessary: 6 bar 625B mounting kit for Initiator 1 pce, type: Ø M18 for indicate the position: Open + close incl. stainless steel punched plate cover as protection against contact - without initiators - 444ee 1 Additional for <APS>-control ** One signal necessary ** ---------------------------------- electr./pneum. control system for butterfly valves, type <APS>, for open and shut the valve and to inflate the sealing simultaneus components: 431ex with mounted 5/2-way-solenoid valve make. Airtec, KN-05-510-HN-B12, 24V DC II 3G EEx nA II T5 // II 3D IP 65 T 95°C 2 pce. throttle-valve for solenoid-valve 1 pce. pneum. pressure switch make. Parker type. PWS-C5149 1 pce. mounting bracket for NAMUR solenoid-valve 2 pce. quick exhaust, type. L-SEV-1/4 MSv =================================== 1 pce. pressure regulator, incl. pressure gauge 0-10 bar incl. mounting support and screwing, version according to drawing 0003475h
based on 163832 / 2017

Warex Valve
5119.APS DN 350 face to face: 78 mm AT600 fitted with pneumatic actuator, type: AT 600.DR - double acting - air supply necessary: 6 bar 625B mounting kit for Initiator 1 pce, type: Ø M18 for indicate the position: Open + close incl. stainless steel punched plate cover as protection against contact - without initiators - 444ee 1 Additional for <APS>-control ** One signal necessary ** ---------------------------------- electr./pneum. control system for butterfly valves, type <APS>, for open and shut the valve and to inflate the sealing simultaneus components: 431ex with mounted 5/2-way-solenoid valve make. Airtec, KN-05-510-HN-B12, 24V DC II 3G EEx nA II T5 // II 3D IP 65 T 95°C 2 pce. throttle-valve for solenoid-valve 1 pce. pneum. pressure switch make. Parker type. PWS-C5149 1 pce. mounting bracket for NAMUR solenoid-valve 2 pce. quick exhaust, type. L-SEV-1/4 MSv =================================== 1 pce. pressure regulator, incl. pressure gauge 0-10 bar incl. mounting support and screwing, version according to drawing 0003475h
5118.APS DN 300 face to face: 78 mm AT300 fitted with pneumatic actuator, type: AT 300.DR - double acting - air supply necessary: ​​6 bar 625B mounting kit for initiator 1 pce, type: Ø M18 for indicate the position: Open + close incl. stainless steel punched plate cover as protection against contact - without initiators - 444ee Additional for <APS> -control ** One signal necessary ** ---------------------------------- electr./pneum. control system for butterfly valves, type <APS>, for open and shut the valve and to inflate the sealing simultaneus components: 431ex with mounted 5/2-way solenoid valve make. Airtec, KN-05-510-HN-B12, 24V DC II 3G EEx nA II T5 // II 3D IP 65 T 95 ° C 2 pce. throttle valve for solenoid valve 1 pce. pneum. pressure switch make. Parker type. PWS-C5149 1 pce. mounting bracket for NAMUR solenoid valve 2 pce. quick exhaust, type. L-SEV-1/4 MSv ==================================== 1 pce. pressure regulator, including pressure gauge 0-10 bar incl. mounting support and screwing, version according to drawing 0003475h
based on 158876 / 2015

Warex Valve
5118.APS DN 300 face to face: 78 mm AT300 fitted with pneumatic actuator, type: AT 300.DR - double acting - air supply necessary: ​​6 bar 625B mounting kit for initiator 1 pce, type: Ø M18 for indicate the position: Open + close incl. stainless steel punched plate cover as protection against contact - without initiators - 444ee Additional for <APS> -control ** One signal necessary ** ---------------------------------- electr./pneum. control system for butterfly valves, type <APS>, for open and shut the valve and to inflate the sealing simultaneus components: 431ex with mounted 5/2-way solenoid valve make. Airtec, KN-05-510-HN-B12, 24V DC II 3G EEx nA II T5 // II 3D IP 65 T 95 ° C 2 pce. throttle valve for solenoid valve 1 pce. pneum. pressure switch make. Parker type. PWS-C5149 1 pce. mounting bracket for NAMUR solenoid valve 2 pce. quick exhaust, type. L-SEV-1/4 MSv ==================================== 1 pce. pressure regulator, including pressure gauge 0-10 bar incl. mounting support and screwing, version according to drawing 0003475h
Warex-butterfly valve, type DKZ110 DN 65 face to face 35 mm for mounting between flanges, drilled according to EN 1092, PN 6 body of Silumin disc of stainless steel 1.4408 shaft of stainless steel stainless steel 1.4057 or equivalent shaft sealing with o-rings bearing bush of brass sealing element of NBR black fixed vulcanized in the housing additional attachments: handlever 12° for DKZ103/110The shut-off valves offered are to be checked with regard to the design., 7-pin ratched, 90°, made of alu
WX2000 DKZ110 DN 65

Warex Valve
Warex-butterfly valve, type DKZ110 DN 65 face to face 35 mm for mounting between flanges, drilled according to EN 1092, PN 6 body of Silumin disc of stainless steel 1.4408 shaft of stainless steel stainless steel 1.4057 or equivalent shaft sealing with o-rings bearing bush of brass sealing element of NBR black fixed vulcanized in the housing additional attachments: handlever 12° for DKZ103/110The shut-off valves offered are to be checked with regard to the design., 7-pin ratched, 90°, made of alu
Warex-butterfly valve, type DKZ 110 <APS> DN 350 face to face 78 mm for mounting between flanges, drilled according to EN 1092, PN 10 body of Silumin disc of stainless steel 1.4408 - with enlarged gap - shaft of stainless steel stainless steel 1.4057 or equivalent shaft sealing with o-rings bearing bush of brass inflatable sealing element of Buna CB black replaceable in the housing with bare shaft, square 22 mm actuator mounting flange acc. DIN/ISO 5211, F10
02150135002

Warex Valve
Warex-butterfly valve, type DKZ 110 <APS> DN 350 face to face 78 mm for mounting between flanges, drilled according to EN 1092, PN 10 body of Silumin disc of stainless steel 1.4408 - with enlarged gap - shaft of stainless steel stainless steel 1.4057 or equivalent shaft sealing with o-rings bearing bush of brass inflatable sealing element of Buna CB black replaceable in the housing with bare shaft, square 22 mm actuator mounting flange acc. DIN/ISO 5211, F10
UHU Plus Endfest 300 2-component glue (Binder and hardener)
6955

Warex Valve
UHU Plus Endfest 300 2-component glue (Binder and hardener)
TYPE:DKZ110, MODEL NO:3674 Nur Dichtungen
SIMPLEX DN350 CLAMP SAFT SIZD. SET

Warex Valve
TYPE:DKZ110, MODEL NO:3674 Nur Dichtungen
Type:DKZ110 SIMPLEX DN350 FLAPPER RUBBER GASKET
59D

Warex Valve
Type:DKZ110 SIMPLEX DN350 FLAPPER RUBBER GASKET
type DKZ110 DN 150 face to face 40 mm for mounting between flanges, drilled according to EN 1092, PN 10 body of silumin disc of stainless steel 1.4408 shaft of stainless steel stainless steel 1.4057 or equivalent shaft sealing with o-rings bearing bush of brass sealing element of silicone red fixed vulcanized in the housing additional attachments: handlever12° for DKZ103/110, 7-pin ratched, 90°, made of aluminium Limit switch box with 2 sensors Turck Ni 4-M12-AZ 31X normally open, 20-250 V AC/ 10-300 V DC, IP 67 all electricity version mounted in housing of makrolon 175/80/55 wired on terminal for medium: air, fluid group 2 characteristics: chemically not aggressive, not sticky working pressure: 0.5 bar maximum allowable working pressure: 1.0 bar (Ps) MAWP (note: MAWP = design pressure) maximum allowable working temperature: 0 °C ... + 100 °C (Ts) MAWT ambient temp.: 0 °C ... + 50 °C (Ta) Ex protection: No requirement Rating of butterfly valves according PED/2014/68/EU, diagram 7 Certified module A2 The butterfly valves are not subject to this conformity assessment test pressure: design pressure x 1.1 bar for tightness
WX2000 DKZ110 DN 150

Warex Valve
type DKZ110 DN 150 face to face 40 mm for mounting between flanges, drilled according to EN 1092, PN 10 body of silumin disc of stainless steel 1.4408 shaft of stainless steel stainless steel 1.4057 or equivalent shaft sealing with o-rings bearing bush of brass sealing element of silicone red fixed vulcanized in the housing additional attachments: handlever12° for DKZ103/110, 7-pin ratched, 90°, made of aluminium Limit switch box with 2 sensors Turck Ni 4-M12-AZ 31X normally open, 20-250 V AC/ 10-300 V DC, IP 67 all electricity version mounted in housing of makrolon 175/80/55 wired on terminal for medium: air, fluid group 2 characteristics: chemically not aggressive, not sticky working pressure: 0.5 bar maximum allowable working pressure: 1.0 bar (Ps) MAWP (note: MAWP = design pressure) maximum allowable working temperature: 0 °C ... + 100 °C (Ts) MAWT ambient temp.: 0 °C ... + 50 °C (Ta) Ex protection: No requirement Rating of butterfly valves according PED/2014/68/EU, diagram 7 Certified module A2 The butterfly valves are not subject to this conformity assessment test pressure: design pressure x 1.1 bar for tightness
SIMPLEX DN350 CLAMP RUBBER GASKET, BRAND: WAREX, TYPE:DKZ110, MODEL NO: 59D Nur dichtungen
SIMPLEX DN350 CLAMP RUBBER GASKET

Warex Valve
SIMPLEX DN350 CLAMP RUBBER GASKET, BRAND: WAREX, TYPE:DKZ110, MODEL NO: 59D Nur dichtungen
shaft seal set DKZ 110/103/101/105/APS/GS suitable for DN 350 - DN 400 NBR O-rings
1005030

Warex Valve
shaft seal set DKZ 110/103/101/105/APS/GS suitable for DN 350 - DN 400 NBR O-rings
Shaft seal set DKZ 110 suitable for DN 350 - DN 400 O-rings made of NBR
3674

Warex Valve
Shaft seal set DKZ 110 suitable for DN 350 - DN 400 O-rings made of NBR
Sealing sleeve made of light polyurethane suitable for DKZ 110 / DN 350 Suitable for foodstuffs, according to Regulation (EC) No. 1935/2004
59D

Warex Valve
Sealing sleeve made of light polyurethane suitable for DKZ 110 / DN 350 Suitable for foodstuffs, according to Regulation (EC) No. 1935/2004
Sealing sleeve made of Buna CB, black, conductive suitable for DKZ110 DN 350
WX6000

Warex Valve
Sealing sleeve made of Buna CB, black, conductive suitable for DKZ110 DN 350