SUITED FOR CP5596 PEDAL BOX
The Throttle sensor has a measuring range of 45°.
Dual redundancy Penny & Giles SRH302 Sensor
ELECTRICAL
Measurement range: 20-360° in 1° increment
Supply voltage: 5Vdc +-0.5Vdc and 9-30Vdc - auto selects
Supply current: <17.5mA per output channel
Supply reverse polarity protection: Yes
Short-circuit protection to GND: Yes
Short-circuit protection to supply: Only with 5Vdc regulated supply
Over-voltage protection: Up to 40Vdc
Power-on settlement: >1s
Resolution: 12-bit (0.025° of measurement range)
Linearity (absolute): +-0.4%
Temperature coefficient: <30ppm/°C in 5Vdc mode, <110ppm/°C in 9-30Vdc mode
VOLTAGE OUTPUTS
0.5-4.5V output option (5V supply): 10-90% +-1% of Vsupply over measurement range
0.5-4.5V output option (9-30V supply): 0.5-4.5V +-3% absolute
Monotonic range (0.5-4.5V output option): 5%/0.25V to 95%/4.75V nominal
0.2-4.8V output option (5V supply): 4-96% +-1% of Vsupply over measurement range
0.2-4.8V output option (9-30V supply): 0.2-4.8V +-3% absolute
Monotonic range (0.2-4.8V output option): 2%/0.1V to 98%/4.9V nominal
Load resistance: 10kOHM min. (resistive to GND)
Output noise: <1mV rms
Input.output delay: <2ms
MECHANICAL
Mechanical Angle: 360° continuos
Operating speed, MAX: 3600°/S
Torque: 120 gm cm Max
Weight: <70g
Mounting: 2x holes to suit M4 screws tightened to 2.9Nm
Cable: 18AWG 1.65mm OD
ENVIRONMENTAL
Operating temperature:
-40°C to 140°C (-40°C to 120°C if conduit fitted)
-40°C to 15.7°C at 9V (de-rate by 1.7°C for each 1V increase)
Storage temperature: -40°C to 140°C (-40°C to 120°C if conduit fitted)
Sealing: IP69k (excluding connector)if conduit fitted
Vibration: BS EN 60068-2-64: 1995 Sec 8.4 (31.4g rms) 20 to 2000Hz
Shock: Survival to 2500g all axes
FE: 20 million operations
MTTFd: >300 years
Electromagnetic interference: EN 61000-4-6 to 100V/m 80-1000MHz & 1.4-2.7GHz
ELECTRICAL CONNECTIONS
4-core cable, 18AWG
Red: V+1
Black: GND 1
Yellow: Output 1
Blue: V+ 2
Green: GND 2
White: Output 2
