Plate slide valve 2000

Plate slide valve 2000

Persta

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta
yurtiçi kargo

Persta ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
Plate slide valve 2000 ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Persta Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Model Tanımı

Plate slide valve 2000 • 700 JJ 44.1 150 / 100
PERSTA plate gate valve 2000
Case forged from 1.7335, seats armored with Stellite 6
Cover seal: Kammprofile 1.7335 with graphite coating
Cover screws/nuts: 1.4923/1.4923
with external spindle thread
Spindle made of 1.4122
Stuffing box packing: graphite sleeve
Stuffing box bolts/nuts: 1.1181/1.1181
needle bearing threaded bushing made of CW713R
Overall length: 450 mm
Inlet: Flange PN 100 according to EN 1092-1, sealing face form B2
Outlet: Flange PN 100 according to EN 1092-1, sealing face form B2
required opening torque: 207 Nm
required closing torque: 138 Nm
with mounting flange F14 - B1 including connecting parts
Design data:
PN 100 according to DIN EN 1092-1 (2018)
TSmin: -10°C; TSmax: 570°C
Test pressure (open): 150 bar
Painting:
Primer coat with Luberpox in layer thickness 30-40µ
Top coat with Lubersil in layer thickness 30-40µ in color RAL 9007
Quality measure:
Requirements:
Fittings >DN 25:
According to Pressure Equipment Directive 2014/68/EU, Category I - III,
Conformity assessment procedure Module H.
Fittings = According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3),
(without CE mark)
Final acceptance with inspection certificate according to EN 10204 / 3.1

Tüm Modeller (Persta)
Slide plates (2pcs = 1 set) ET suitable for 700 JJ 44.2 DN 80 PN 100
Art.: 172906

Slide plates (2pcs = 1 set) ET suitable for 700 JJ 44.2 DN 80 PN 100

spindle ET suitable for 700 JJ 44.2 DN 80 PN 100
Art.: 123754

spindle ET suitable for 700 JJ 44.2 DN 80 PN 100

WELDING -- EXPLANATION: IT WILL BE USED AT CHEMICAL DOM ENTRIES OF DISTRIBUTION COLLECTOR AND BOILERS ITEM 1: WELDED PERSTA GATE VALVE 13 CR MO 44 (1.7335) DN25 PN63 425 C
GATE VANA DN25PN63 13CRMO44

WELDING -- EXPLANATION: IT WILL BE USED AT CHEMICAL DOM ENTRIES OF DISTRIBUTION COLLECTOR AND BOILERS ITEM 1: WELDED PERSTA GATE VALVE 13 CR MO 44 (1.7335) DN25 PN63 425 C

EXPLANATION: IT WILL BE USED AT CHEMICAL DOM ENTRIES OF DISTRIBUTION COLLECTOR AND BOILERS ITEM 1: WELDED PERSTA GATE VALVE 13 CR MO 44(1.7335) DN40 PN63 425 C
GATE VANA DN40PN63 13CRMO44 Welding

EXPLANATION: IT WILL BE USED AT CHEMICAL DOM ENTRIES OF DISTRIBUTION COLLECTOR AND BOILERS ITEM 1: WELDED PERSTA GATE VALVE 13 CR MO 44(1.7335) DN40 PN63 425 C

Nominal diameter: 50 Pressure level / pressure: PN63 Actuation: Handwheel Attachment valve in straight form forged from 1.7335, seats stellite Flanges drilled Sealing strip according to EN 1092-1 Form B2 Requirements: Fittings> DN 25: According to Pressure Equipment Directive 2014/68 / EU, category I - III, Conformity Assessment Module H. Fittings = <DN 25: According to the Pressure Equipment Directive 2014/68 / EU, Article 4, paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
Aufsatz-Ventil 200 Ae 44.1 50/63

Nominal diameter: 50 Pressure level / pressure: PN63 Actuation: Handwheel Attachment valve in straight form forged from 1.7335, seats stellite Flanges drilled Sealing strip according to EN 1092-1 Form B2 Requirements: Fittings> DN 25: According to Pressure Equipment Directive 2014/68 / EU, category I - III, Conformity Assessment Module H. Fittings = <DN 25: According to the Pressure Equipment Directive 2014/68 / EU, Article 4, paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1

Pn63 Fl - Globe Ventil Persta Dn80 Pn63 Fl
122898
200 Bf 65.3 10/630
Nominal size 80 Pressure rating PN 63 Operation: handwheel Attachment valve in straight form made of GS-17 CrMo 55, seats Stellite Flange drilled -Sealing strip according to DIN 2526 form E or according to prEN 1092-1 form B2 Design data: PN 63 according to DIN 2401 Painting: Standard paint Surface treatment: degreasing, grinding or blasting Substrate = Luberpox 1K zinc dust base paint 30 μm to 40 μm Top coat = Lubersil 1K one-coat and top coat paint 30 μm to 40 μm Total layer thickness up to 80 μm Color: silver gray / aluminum (similar to RAL 9007) max.permissible temperature 600 ° C Paint manufacturer: Phil.Berger Lack- und chem. Factory Ltd. Quality measure: Requirements: Fittings> DN 25: According to the Pressure Equipment Directive 2014/68 / EU, Category I - III, Conformity assessment procedure module H. Fittings = <DN 25: According to the Pressure Equipment Directive 2014/68 / EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
Attachment valve 200 AE 34.1 80/63

Nominal size 80 Pressure rating PN 63 Operation: handwheel Attachment valve in straight form made of GS-17 CrMo 55, seats Stellite Flange drilled -Sealing strip according to DIN 2526 form E or according to prEN 1092-1 form B2 Design data: PN 63 according to DIN 2401 Painting: Standard paint Surface treatment: degreasing, grinding or blasting Substrate = Luberpox 1K zinc dust base paint 30 μm to 40 μm Top coat = Lubersil 1K one-coat and top coat paint 30 μm to 40 μm Total layer thickness up to 80 μm Color: silver gray / aluminum (similar to RAL 9007) max.permissible temperature 600 ° C Paint manufacturer: Phil.Berger Lack- und chem. Factory Ltd. Quality measure: Requirements: Fittings> DN 25: According to the Pressure Equipment Directive 2014/68 / EU, Category I - III, Conformity assessment procedure module H. Fittings = <DN 25: According to the Pressure Equipment Directive 2014/68 / EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1

200 AJ 34.2 DN80 PN100 ART. NO. 146856

BENZER ÜRÜNLER

Keysight
Keysight
Chesterton
Chesterton
Schuhmann Messtechnik
Schuhmann Messtechnik
Mahr
Mahr
Hs Cooler
Hs Cooler