01760431

01760431

Erichsen

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta
yurtiçi kargo

Erichsen ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
01760431 ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Erichsen Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Model Tanımı

Gloss meter PICOGLOSS 503
Three-angle gloss meter 20°/60°/85°, with color display,
Measured value memory, statistics function and USB (mini) interface,
including gloss standard A, USB cable, battery, wrist strap,
Carrying case, calibration certificate, quick start guide.

Tüm Modeller (Erichsen)
SCRATCH HARDNESS TESTER 413 Basic unit with motor-driven (5 rpm) specimen table (Ø 115 mm) for clamping test panels of max. size 100 x 100 x 22 mm or Ø 140 mm x 22 mm. The scope of supply includes: Scaled load arm for fixing the test tool and with device for radial fine adjustment (micrometer), 2 weights for the load ranges 1 N and 10 N, 1 counterweight with spirit level, box level, magnifying glass, carrying case and Manufacturer's Test Certificate M. Power supply: 230 VAC, 50 Hz (Other voltages on request - surcharge)
01020131

SCRATCH HARDNESS TESTER 413 Basic unit with motor-driven (5 rpm) specimen table (Ø 115 mm) for clamping test panels of max. size 100 x 100 x 22 mm or Ø 140 mm x 22 mm. The scope of supply includes: Scaled load arm for fixing the test tool and with device for radial fine adjustment (micrometer), 2 weights for the load ranges 1 N and 10 N, 1 counterweight with spirit level, box level, magnifying glass, carrying case and Manufacturer's Test Certificate M. Power supply: 230 VAC, 50 Hz (Other voltages on request - surcharge)

Modell 305 (03050151)
Modell 305 (03050251) Alternative
LINEARTESTER 249 Scratch hardness tester Scratching force in the range (0.5 - 20) N, with electromotive drive, 4-way adjustable load arm; Standard height = approx. 10 mm (+ 20 mm / + 40 mm / + 60 mm) *, including Allen key, Circular bubble, power supply and operating instructions Mains connection: (100 - 240) VAC, (47 - 63) Hz * To use the single scratch function within the height adjustment (from + 20 mm / + 40 mm / + 60 mm) is also the respective one Scenery increase (not included in the standard scope of delivery) to use.
02630131

LINEARTESTER 249 Scratch hardness tester Scratching force in the range (0.5 - 20) N, with electromotive drive, 4-way adjustable load arm; Standard height = approx. 10 mm (+ 20 mm / + 40 mm / + 60 mm) *, including Allen key, Circular bubble, power supply and operating instructions Mains connection: (100 - 240) VAC, (47 - 63) Hz * To use the single scratch function within the height adjustment (from + 20 mm / + 40 mm / + 60 mm) is also the respective one Scenery increase (not included in the standard scope of delivery) to use.

Model 295
Hardness test rod, model 318 including test probe no. 1 (acc. to Bosch, 0.75 mm Ø) and 3 springs
Modell 318

Hardness test rod, model 318 including test probe no. 1 (acc. to Bosch, 0.75 mm Ø) and 3 springs

Calibration with creation of a manufacturer test certificate M / Hardness test rod Mod 318 including 3 springs and test tip
04370132 (Optional)

Calibration with creation of a manufacturer test certificate M / Hardness test rod Mod 318 including 3 springs and test tip

Coatmaster 510
for thickness measurement of organic coatings on all Substrates according to the wedge-cut method, with rotatable and laterally displaceable microscope for measuring ellipsoidal Drill holes. The delivery includes: Drill 5 for layer thicknesses up to 300 μm (scale factor 3 μm / Skt., Cutting angle 8.5 °), 2 felt-tip pens (black / silver), screwdriver, Rechargeable battery (9 volts), power adapter (100 - 240 VAC, 47 - 63 Hz) and plastic case
Paint Borer Modell 518mc

for thickness measurement of organic coatings on all Substrates according to the wedge-cut method, with rotatable and laterally displaceable microscope for measuring ellipsoidal Drill holes. The delivery includes: Drill 5 for layer thicknesses up to 300 μm (scale factor 3 μm / Skt., Cutting angle 8.5 °), 2 felt-tip pens (black / silver), screwdriver, Rechargeable battery (9 volts), power adapter (100 - 240 VAC, 47 - 63 Hz) and plastic case

Scratch pen after van Laar, Model 426
00940131

Scratch pen after van Laar, Model 426

BENZER ÜRÜNLER

Rs-Components
Rs-Components
Binks By Carlisle Fluid Technologies
Binks By Carlisle Fluid Technologies
Ggb
Ggb
Pr Electronics
Pr Electronics
Aep Transducers
Aep Transducers