23480131

23480131

Erichsen

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta
yurtiçi kargo

Erichsen ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
23480131 ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Erichsen Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Model Tanımı

Coating thickness gauge PAINT BORER 518 USB
for measuring the thickness of organic coatings on all surfaces
substrates using the wedge cutting method; with high resolution
Digital microscope (50x magnification, 2 million pixel CMOS image sensor) for immediate detection and image capture
circular or ellipsoidal drill holes directly on the object as well
Documentation, for connection to PC/laptop.
The scope of delivery includes:
Software (USB stick), calibration standard, USB cable, drill 5
for layer thicknesses up to 300 µm (scale factor 3 µm/skt.,
cutting angle 8.5°), 2 felt-tip pens (black/silver),
Screwdriver, rechargeable battery (9 volts), plug-in power supply
(100 - 240 VAC, 47 - 63 Hz), plastic case and
Operation manual; without manufacturer test certificate.

Tüm Modeller (Erichsen)
Modell 305 (03050151)
Modell 305 (03050251) Alternative
LINEARTESTER 249 Scratch hardness tester Scratching force in the range (0.5 - 20) N, with electromotive drive, 4-way adjustable load arm; Standard height = approx. 10 mm (+ 20 mm / + 40 mm / + 60 mm) *, including Allen key, Circular bubble, power supply and operating instructions Mains connection: (100 - 240) VAC, (47 - 63) Hz * To use the single scratch function within the height adjustment (from + 20 mm / + 40 mm / + 60 mm) is also the respective one Scenery increase (not included in the standard scope of delivery) to use.
02630131

LINEARTESTER 249 Scratch hardness tester Scratching force in the range (0.5 - 20) N, with electromotive drive, 4-way adjustable load arm; Standard height = approx. 10 mm (+ 20 mm / + 40 mm / + 60 mm) *, including Allen key, Circular bubble, power supply and operating instructions Mains connection: (100 - 240) VAC, (47 - 63) Hz * To use the single scratch function within the height adjustment (from + 20 mm / + 40 mm / + 60 mm) is also the respective one Scenery increase (not included in the standard scope of delivery) to use.

Model 295
Hardness test rod, model 318 including test probe no. 1 (acc. to Bosch, 0.75 mm Ø) and 3 springs
Modell 318

Hardness test rod, model 318 including test probe no. 1 (acc. to Bosch, 0.75 mm Ø) and 3 springs

Calibration with creation of a manufacturer test certificate M / Hardness test rod Mod 318 including 3 springs and test tip
04370132 (Optional)

Calibration with creation of a manufacturer test certificate M / Hardness test rod Mod 318 including 3 springs and test tip

Coatmaster 510
Multi-Cross Cutter Model 295
for thickness measurement of organic coatings on all Substrates according to the wedge-cut method, with rotatable and laterally displaceable microscope for measuring ellipsoidal Drill holes. The delivery includes: Drill 5 for layer thicknesses up to 300 μm (scale factor 3 μm / Skt., Cutting angle 8.5 °), 2 felt-tip pens (black / silver), screwdriver, Rechargeable battery (9 volts), power adapter (100 - 240 VAC, 47 - 63 Hz) and plastic case
Paint Borer Modell 518mc

for thickness measurement of organic coatings on all Substrates according to the wedge-cut method, with rotatable and laterally displaceable microscope for measuring ellipsoidal Drill holes. The delivery includes: Drill 5 for layer thicknesses up to 300 μm (scale factor 3 μm / Skt., Cutting angle 8.5 °), 2 felt-tip pens (black / silver), screwdriver, Rechargeable battery (9 volts), power adapter (100 - 240 VAC, 47 - 63 Hz) and plastic case

0218 01 32

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz

BENZER ÜRÜNLER

Hetronic
Hetronic
Yamatake Azbil
Yamatake Azbil
Rothe Erde
Rothe Erde
Cla-Val
Cla-Val
Wacom
Wacom