BNA-EN32/16/B1-MG-M700-V60x2-MRA-ZVS225/PN25/R48H

Bypass level indicator type BNA-SA1
Pressure: 1 bar; Temp.: -30°C...160 °C; Density, medium: 850 kg/m³
Interpretation: PED 2014/68/EU (AD2000)
Classification according to PED 2014/68/EU: Category I, Module A,
fluid group 1
Test pressure: 2 bar
Chamber dimensions: 60.3 x 2 mm stainless steel 1.4571 (316Ti)
Process connection: Flange DIN EN 1092-1 DN 32 PN 16 Form B1
Center distance: 700 mm
Measuring range: 700 mm
Chamber closure at the top: tube bottom
Chamber closure bottom: 100/84 with O-ring recess
Venting: Screw plug G 1/2"
Drain: screw plug G 1/2"
Float: ZVSS225/PN25/R48H
Damping element: Damping spring bottom/top with cover
Seal(s): Viton O-Ring 63.10 x 3.53mm Shore 70
Screws: stainless steel A4-70 (M)
Overhang at top (T): 100 mm
Overhang bottom (U): 200 mm
Lateral distance (X): 150 mm
Nameplate: laser-engraved aluminum
***
Additional ordering information: Design data on type plate: -1 to 1 bar
Seal for G1/2" screw top, bottom: PTFE
MRA-M700
Display for bypass type BMD-SA
Measuring range: 700 mm
Housing material: anodized aluminum
Display element: rollers red/white
Lens: Makrolon PC
MG-AUVK5/T15-L850/M700/14
Bypass sensor Reed type BLR-SB
Material: stainless steel 1.4571 (316Ti)
Housing: Aluminum IP66/IP68 Cable gland M20x1.5 mm
Maximum ambient temperature on the housing: 85°C
LCD display: Without
Head transmitter: T15.HZ - 2-wire, standard
Output signal: 4-20 mA
Housing arrangement: Angled at the bottom
100% mark (L1): 0 mm
0% mark: 0 mm
Measuring range: 700 mm
Pipe length: 850 mm
contact pitch: 5 mm