Mix Srl

Mix Srl

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta
yurtiçi kargo

Mix Srl ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
Mix Srl ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Marka Kataloğu
Firmamız, Mix Srl Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.

Mix Srl firması, genellikle endüstriyel makineler ve ekipmanlar üreten bir şirkettir. Mix Srl'in ürettiği bazı önemli ürünler şunlardır:

1. **Karıştırma ve Mikser Sistemleri**: Mix Srl, özellikle endüstriyel sektörler için karıştırma ve mikser makineleri üretir. Bu makineler, farklı malzemelerin homojen bir şekilde karıştırılmasını sağlayarak verimli üretim süreçlerine olanak tanır.

2. **Granülasyon Ekipmanları**: Firma, granülasyon işlemleri için makineler üretir. Bu makineler, sıvı veya toz halinde olan malzemelerin granül formuna dönüştürülmesini sağlar ve çeşitli endüstriyel uygulamalarda kullanılır.

3. **Toz Teknolojisi ve Filtrasyon Sistemleri**: Mix Srl, endüstriyel toz işleme, filtrasyon ve hava temizleme sistemleri sunar. Bu sistemler, havadaki toz partiküllerini temizlemek ve ortamın sağlıklı koşullarını sağlamak için kullanılır.

4. **Endüstriyel Boyama ve Kaplama Sistemleri**: Firma, çeşitli endüstriyel uygulamalar için boyama ve kaplama makineleri üretir. Bu makineler, ürünlerin yüzeylerine dayanıklı kaplamalar uygulanmasına olanak tanır ve kaliteyi artırır.

Mix Srl, endüstriyel üretim süreçlerinde verimliliği artıran ve kaliteli sonuçlar sağlayan makineler ve çözümler sunar.

Devamını Oku
Tüm Modeller (Mix Srl)
Pneumatic actuator for N-SVAH350÷400 with the following properties: - Connection for splined shaft DIN5482 - high cover, designed for use with inductive, mechanical and micro limit switches - Pneumatic cylinder Ø125 mm, double-acting - Air consumption for 1 operation: 7.6 NI - Operating time for 1 movement at 6 bar: ~ 0.5 s - max. torque at 6 bar: 300 Nm - suitable for ambient temperatures from -10 °C to +40 °C - WITHOUT solenoid valve, coil, limit switch, etc. (sold separately) - including packaging and operating instructions ---------- The Machinery Directive 2006/42/EC does not apply to drives which are separate elements of the machinery. If the Pneumatic actuator controls a rotary valve, this falls within the scope of the Directive and is considered incomplete Machine classified. The pneumatic actuator does not require a separate declaration of incorporation. The declaration of incorporation for the butterfly valve is only valid if it is controlled by a motor or pneumatic drive. ---------- The rotary actuator is NOT suitable for use in potentially explosive atmospheres (WITHOUT ATEX declaration of conformity)
N-RAPC125XAP

Pneumatic actuator for N-SVAH350÷400 with the following properties: - Connection for splined shaft DIN5482 - high cover, designed for use with inductive, mechanical and micro limit switches - Pneumatic cylinder Ø125 mm, double-acting - Air consumption for 1 operation: 7.6 NI - Operating time for 1 movement at 6 bar: ~ 0.5 s - max. torque at 6 bar: 300 Nm - suitable for ambient temperatures from -10 °C to +40 °C - WITHOUT solenoid valve, coil, limit switch, etc. (sold separately) - including packaging and operating instructions ---------- The Machinery Directive 2006/42/EC does not apply to drives which are separate elements of the machinery. If the Pneumatic actuator controls a rotary valve, this falls within the scope of the Directive and is considered incomplete Machine classified. The pneumatic actuator does not require a separate declaration of incorporation. The declaration of incorporation for the butterfly valve is only valid if it is controlled by a motor or pneumatic drive. ---------- The rotary actuator is NOT suitable for use in potentially explosive atmospheres (WITHOUT ATEX declaration of conformity)

Inductive limit switches for RAP…XA 3V÷24V DC - type PNP) See catalogue SVA/
KEF2F

Inductive limit switches for RAP…XA 3V÷24V DC - type PNP) See catalogue SVA/

Flange mounted butterfly valve - Nominal diameter 300mm - double-flange design (bores according to DIN 2501) - with short splined shaft (according to DIN 5482) - Body and disc made of cast aluminum / in stainless steel / , lined with rubber - with replaceable, white NBR seal, in the area of the flap plate - Ambient temperature: -10 °C ÷ +40 °C - Product temperature: -20°C ÷ +100°C - Operating pressure: -0.2 bar ÷ 0.2 bar, tested at room temperature - Dustproof - WITHOUT drive (to be ordered separately) ---------- The butterfly valve for the coupling with pneumatic or motor drive is classified as partly completed machinery with declaration of incorporation in accordance with Machinery Directive 2006/42/EC. The rotary damper operated by hand lever (or without drive) does not fall within the scope of the Machinery Directive 2006/42/EC and will be delivered WITHOUT a declaration of incorporation. ---------- The butterfly valve is not suitable for use in potentially explosive areas.
N-SVAH300C2B61

Flange mounted butterfly valve - Nominal diameter 300mm - double-flange design (bores according to DIN 2501) - with short splined shaft (according to DIN 5482) - Body and disc made of cast aluminum / in stainless steel / , lined with rubber - with replaceable, white NBR seal, in the area of the flap plate - Ambient temperature: -10 °C ÷ +40 °C - Product temperature: -20°C ÷ +100°C - Operating pressure: -0.2 bar ÷ 0.2 bar, tested at room temperature - Dustproof - WITHOUT drive (to be ordered separately) ---------- The butterfly valve for the coupling with pneumatic or motor drive is classified as partly completed machinery with declaration of incorporation in accordance with Machinery Directive 2006/42/EC. The rotary damper operated by hand lever (or without drive) does not fall within the scope of the Machinery Directive 2006/42/EC and will be delivered WITHOUT a declaration of incorporation. ---------- The butterfly valve is not suitable for use in potentially explosive areas.

Butterfly valve DN400 Nominal diameter DN400 - Short splined shaft according to DIN 5482 - Cast aluminum body lined with rubber and plate made of stainless steel 1.4301 - Seal made of white NBR suitable: - for continuous operation; - for products with temperatures - 20°C + 100°C - Standard, dustproof at room pressure - not suitable for use in potentially explosive atmospheres; - (Declaration of incorporation as partly completed machinery)
N-SVAH400C2A81

Butterfly valve DN400 Nominal diameter DN400 - Short splined shaft according to DIN 5482 - Cast aluminum body lined with rubber and plate made of stainless steel 1.4301 - Seal made of white NBR suitable: - for continuous operation; - for products with temperatures - 20°C + 100°C - Standard, dustproof at room pressure - not suitable for use in potentially explosive atmospheres; - (Declaration of incorporation as partly completed machinery)

DN300 (MIX I SVA 300)
Ssm250k4
Mix 18606
Mix 18604
A-Kqk06k5 Obsolete, Replacement A-Kqkg6b0r
A-Kqkg6b0r
Aignep Prev For Type:A-Kqk06k5

BENZER ÜRÜNLER

Fristam
Fristam
Pepperl And Fuchs
Pepperl And Fuchs
Haweka
Haweka
R&S Machinery
R&S Machinery
Chesterton
Chesterton