8044/080VE0002M------ZC-S--F

8044/080VE0002M------ZC-S--F

Schubert Salzer

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta

Schubert Salzer ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
8044/080VE0002M------ZC-S--F ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Schubert Salzer Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Model Tanımı

GS control valve with piston drive (short design)
ID number 4069570 Nominal size (080): DN 80 (Kvs 92; Cv 107), function (E): GS piston control valve, short design (type 8044), design (0): GS1 wafer design PN10-PN40 (for flanges according to DIN EN 1092-1, form B), housing (0): carbon steel 1.0619, safety position (0): spring closes, drive (2): piston ø125mm, springs (-): standard spring assembly, sliding disc (movable)( -):Carbon material, sliding disc (fixed)(-): standard coating, stainless steel 1.4571, Kvs/Cv values(-): 100% (standard), characteristic(-): linear, positioner(C): digital Positioner Type 8049, 4-wire version, IP65, special treatment (F): Positioner version for Ex-Zone 22 (DustD, II Category 3)

Tüm Modeller (Schubert Salzer)
Ident number 4057163 Customs fee number. 8481 8079 Type 7010: Angle seat valve Nominal diameter: DN 15 Type: inclined seat Connection: NPT thread Housing material: stainless steel Seat seal: PEEK Control function: spring closes (closing against media flow) Drive: piston Ø50mm Piston springs: three springs Temperature version: High temperature version HT220 Special assembly: Taper nut or control cone and piston rod additionally secure.
7010/015v1527203--B-S----0

Ident number 4057163 Customs fee number. 8481 8079 Type 7010: Angle seat valve Nominal diameter: DN 15 Type: inclined seat Connection: NPT thread Housing material: stainless steel Seat seal: PEEK Control function: spring closes (closing against media flow) Drive: piston Ø50mm Piston springs: three springs Temperature version: High temperature version HT220 Special assembly: Taper nut or control cone and piston rod additionally secure.

4058343 Digital positioner Type 8049-4, 24VDC, IP65 Standard housing, standard air flow El. Connection 2x M16x1,5; pneu. Connection G1 / 8 " Standard probe rod, indicator disc PA Customs fee number. 9032 8900 set to characteristic 7020 / 015V1020C11--2-S - 3
8049/4p5-1s000-11-00

4058343 Digital positioner Type 8049-4, 24VDC, IP65 Standard housing, standard air flow El. Connection 2x M16x1,5; pneu. Connection G1 / 8 " Standard probe rod, indicator disc PA Customs fee number. 9032 8900 set to characteristic 7020 / 015V1020C11--2-S - 3

Gs8051
Type 4040: spherical sector valve Nominal size: DN 25 (Kvs 21; Cv 24.6) Item: valve Design: KS2 wafer type construction for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in flange design) Housing material: stainless steel 1.4408 or 1.4404 Seat combination: Seat ring: Stellite; Ball sector: stainless steel, hard chrome-plated and lapped, retaining ring hard chrome-plated Sealing combination: sealing the bearing journal with packing PTFE; O-ring (part 15) made of VITON, medium temperature: -15 ° C to + 200 ° C Drive: Pneumatic swivel drive (Air Torque) with mounting kit according to DIN / ISO 5211 Fail-safe position: single-acting, spring closes Assembly: standard
4040/025V31C3T1-M

Type 4040: spherical sector valve Nominal size: DN 25 (Kvs 21; Cv 24.6) Item: valve Design: KS2 wafer type construction for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in flange design) Housing material: stainless steel 1.4408 or 1.4404 Seat combination: Seat ring: Stellite; Ball sector: stainless steel, hard chrome-plated and lapped, retaining ring hard chrome-plated Sealing combination: sealing the bearing journal with packing PTFE; O-ring (part 15) made of VITON, medium temperature: -15 ° C to + 200 ° C Drive: Pneumatic swivel drive (Air Torque) with mounting kit according to DIN / ISO 5211 Fail-safe position: single-acting, spring closes Assembly: standard

Nominal size (040): DN 40 (Kvs 70; Cv 81), article (V): valve, design (3): KS2 wafer design for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in Flange construction), housing material (1): stainless steel 1.4408 or 1.4404, Seat combination (C): Seat ring: Stellite; Ball sector: stainless steel, hard chrome-plated and lapped, retaining ring hard chrome-plated, sealing combination (3): sealing Bearing journal with packing made of PTFE; O-ring (part 15) made of VITON, Media temperature: -15 ° C to + 200 ° C, drive (T): pneumatic Swivel drive (Air Torque) with mounting kit according to DIN / ISO 5211, Fail-safe position (1): single-acting, spring closes Customs fee number. 8481 8099
4040/040V31C3T1

Nominal size (040): DN 40 (Kvs 70; Cv 81), article (V): valve, design (3): KS2 wafer design for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in Flange construction), housing material (1): stainless steel 1.4408 or 1.4404, Seat combination (C): Seat ring: Stellite; Ball sector: stainless steel, hard chrome-plated and lapped, retaining ring hard chrome-plated, sealing combination (3): sealing Bearing journal with packing made of PTFE; O-ring (part 15) made of VITON, Media temperature: -15 ° C to + 200 ° C, drive (T): pneumatic Swivel drive (Air Torque) with mounting kit according to DIN / ISO 5211, Fail-safe position (1): single-acting, spring closes Customs fee number. 8481 8099

Ident number 2803470 Nominal size (080): DN 80 (Kvs 300; Cv 348), article (V): valve, design (3): KS2 wafer design for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in Flange construction), housing material (1): stainless steel 1.4408 or 1.4404, Seat combination (C): Seat ring: Stellite; Ball sector: stainless steel, hard chrome-plated and lapped, retaining ring hard chrome-plated, sealing combination (3): sealing Bearing journal with packing made of PTFE; O-ring (part 15) made of VITON, Media temperature: -15 ° C to + 200 ° C, drive (T): pneumatic Swivel drive (Air Torque) with mounting kit according to DIN / ISO 5211, Fail-safe position (1): single-acting, spring closes Customs fee number. 8481 8099
4040/080V31C3T1

Ident number 2803470 Nominal size (080): DN 80 (Kvs 300; Cv 348), article (V): valve, design (3): KS2 wafer design for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in Flange construction), housing material (1): stainless steel 1.4408 or 1.4404, Seat combination (C): Seat ring: Stellite; Ball sector: stainless steel, hard chrome-plated and lapped, retaining ring hard chrome-plated, sealing combination (3): sealing Bearing journal with packing made of PTFE; O-ring (part 15) made of VITON, Media temperature: -15 ° C to + 200 ° C, drive (T): pneumatic Swivel drive (Air Torque) with mounting kit according to DIN / ISO 5211, Fail-safe position (1): single-acting, spring closes Customs fee number. 8481 8099

Type 4040: spherical sector valve Nominal size: DN 25 (Kvs 21; Cv 24.6) Item: valve Design: KS2 wafer type construction for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in flange design) Housing material: stainless steel 1.4408 or 1.4404 Seat combination: Seat ring: Stellite; Ball sector: stainless steel, hard chrome-plated and lapped, retaining ring hard chrome-plated Sealing combination: sealing the bearing journal with packing PTFE; O-ring (part 15) made of VITON, medium temperature: -15 ° C to + 200 ° C Drive: without drive, with mounting kit according to DIN / ISO 5211 (row 2)
4040/025V31C32 (without actuator)

Type 4040: spherical sector valve Nominal size: DN 25 (Kvs 21; Cv 24.6) Item: valve Design: KS2 wafer type construction for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in flange design) Housing material: stainless steel 1.4408 or 1.4404 Seat combination: Seat ring: Stellite; Ball sector: stainless steel, hard chrome-plated and lapped, retaining ring hard chrome-plated Sealing combination: sealing the bearing journal with packing PTFE; O-ring (part 15) made of VITON, medium temperature: -15 ° C to + 200 ° C Drive: without drive, with mounting kit according to DIN / ISO 5211 (row 2)

Type 4040: spherical sector valve Nominal size: DN 40 (Kvs 70; Cv 81) Item: valve Design: KS2 wafer type construction for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in flange design) Housing material: stainless steel 1.4408 or 1.4404 Seat combination: Seat ring: Stellite; Ball sector: stainless steel, hard chrome-plated and lapped, retaining ring hard chrome-plated Sealing combination: sealing the bearing journal with packing PTFE; O-ring (part 15) made of VITON, medium temperature: -15 ° C to + 200 ° C Drive: without drive, with mounting kit according to DIN / ISO 5211 (row 2)
4040/040V31C32 (without actuator)

Type 4040: spherical sector valve Nominal size: DN 40 (Kvs 70; Cv 81) Item: valve Design: KS2 wafer type construction for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in flange design) Housing material: stainless steel 1.4408 or 1.4404 Seat combination: Seat ring: Stellite; Ball sector: stainless steel, hard chrome-plated and lapped, retaining ring hard chrome-plated Sealing combination: sealing the bearing journal with packing PTFE; O-ring (part 15) made of VITON, medium temperature: -15 ° C to + 200 ° C Drive: without drive, with mounting kit according to DIN / ISO 5211 (row 2)

Type 4040: spherical sector valve Nominal size: DN 80 (Kvs 300; Cv 348) Item: valve Design: KS2 wafer type construction for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in flange design) Housing material: stainless steel 1.4408 or 1.4404 Seat combination: Seat ring: Stellite; Ball sector: stainless steel, hard chrome-plated and lapped, retaining ring hard chrome-plated Sealing combination: sealing the bearing journal with packing PTFE; O-ring (part 15) made of VITON, medium temperature: -15 ° C to + 200 ° C Drive: without drive, with mounting kit according to DIN / ISO 5211 (row 2)
4040/080V31C32 (without actuator)

Type 4040: spherical sector valve Nominal size: DN 80 (Kvs 300; Cv 348) Item: valve Design: KS2 wafer type construction for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN65 - DN100: PN25, DN125-DN250: PN16, DN300: PN16 in flange design) Housing material: stainless steel 1.4408 or 1.4404 Seat combination: Seat ring: Stellite; Ball sector: stainless steel, hard chrome-plated and lapped, retaining ring hard chrome-plated Sealing combination: sealing the bearing journal with packing PTFE; O-ring (part 15) made of VITON, medium temperature: -15 ° C to + 200 ° C Drive: without drive, with mounting kit according to DIN / ISO 5211 (row 2)

7020 / 015V1020C11--2-S - 3 Slanted seat control valve Nominal diameter (015): DN 15 (Kvs 0.93, Cv 1.08), type (1): angle seat, Connection (0): Whitworth pipe thread, housing material (2): stainless steel W.-Nr.1.4408 or 1.4571, seat seal (0): PTFE, positioner (C): digital Positioner Type 8049, 4-wire version, IP 65, actuator (1): Piston ø80mm, springs, function (1): Spring opens (only with digital positioner), Characteristic (-): linear, Kvs / Cv values (2): reduced to 25%, position indicator, Attachments (-): Standard, positioner adjustment (3): inverse function 20 -4mA Customs fee number. 8481 8079
Ident-Nummer 4082178

7020 / 015V1020C11--2-S - 3 Slanted seat control valve Nominal diameter (015): DN 15 (Kvs 0.93, Cv 1.08), type (1): angle seat, Connection (0): Whitworth pipe thread, housing material (2): stainless steel W.-Nr.1.4408 or 1.4571, seat seal (0): PTFE, positioner (C): digital Positioner Type 8049, 4-wire version, IP 65, actuator (1): Piston ø80mm, springs, function (1): Spring opens (only with digital positioner), Characteristic (-): linear, Kvs / Cv values (2): reduced to 25%, position indicator, Attachments (-): Standard, positioner adjustment (3): inverse function 20 -4mA Customs fee number. 8481 8079

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz

BENZER ÜRÜNLER

Apex
Apex
Tripus
Tripus
Nabtesco
Nabtesco
Althen
Althen
S+s
S+s