6013-2031-00

6013-2031-00
Former article no.: S 520.3
Compact flame detector CFC2000UV
Relay and 0/4-20mA output
Two-channel compact system for continuous monitoring
of gas and oil burners of any power with additional
Frequency analysis for better selectivity. The compact
Flame detector is equipped with a semiconductor sensor
whose spectral sensitivity lies in the UV range.
Electronic self-monitoring guarantees safe operation.
Flame intensity and the status of the flame relay are
LEDs. The safety shutdown time can be set via a jumper
predefined and set via software (1-5s).
Sensitivity, ON/OFF level and switch-on delay are controlled by
Software discontinued. An online frequency analysis and visualization
of the flame radiation is possible with the BFI software.
Further technical details:
Two separate and adjustable sensitivity levels
Potential-free changeover contact for the flame ON/OFF signals.
Flame relay: potential-free changeover contact
max. 48V switching voltage
max. 1A switching current
max. 30W switching power
Flame signal output: 0/4-20mA (Ra <250Ohm)
Spectral range: 280 to 420 nm
Operating mode: Continuous operation
Viewing angle: 2.7°
Self-test: once in 800ms
Supply voltage: 24V DC
Current consumption: approx. 200mA
Ambient temperature: -20 to +70°C.
Data transmission: RS232/infrared interface
Electrical connection: Harting connector 90°
Dimensions [mm]: L 235 x W 108 x H 190 mm
Housing: aluminum, RAL5010, IP65
ATEX Zone: II 3G Ex ec nC II T4 Gc
SIL: SIL3