" Badger Meter" markasına ait modeller;
Please look at the attachment
M2000 Elektromagnetischer Durchflussmesser Modmag

Badger Meter
Please look at the attachment
MID_M2000_BA_02_1011
Modmag M2000

Badger Meter
MID_M2000_BA_02_1011
with scalable pulse output Pulse length adjustable with analog output 4-20mA for flow rate Minimum and maximum values can be programmed for analog output Power supply: 6-24 VDC Six-digit LCD display with three decimal points Display in liters, gallons, pints or quarts 11-digit, non-resettable totalizer and 6-digit, resettable totalizer in liters or gallons Max. resettable quantity: 999999 L Replaceable battery (CR123A) with long life Display of current flow (format xxxx.x, in l/min) and resettable counter simultaneously possible and resettable counter simultaneously possible Max. temp. +80°C (possibly limited by basic meter) Protection class: IP 65 When ordering please state: Pulse value: 0.01 / 0.1 / 1 / 10 / 100 PPL Pulse length: 2ms,10ms,20ms,40ms,100ms Analog output: Value for 4mA / Value for 20mA If we do not receive any information about the desired settings, the default will be set. 1 PPL / 2ms / 4mA = 0 / 20mA = maximum flow
16LCD display ILR 750 - spare part kit

Badger Meter
with scalable pulse output Pulse length adjustable with analog output 4-20mA for flow rate Minimum and maximum values can be programmed for analog output Power supply: 6-24 VDC Six-digit LCD display with three decimal points Display in liters, gallons, pints or quarts 11-digit, non-resettable totalizer and 6-digit, resettable totalizer in liters or gallons Max. resettable quantity: 999999 L Replaceable battery (CR123A) with long life Display of current flow (format xxxx.x, in l/min) and resettable counter simultaneously possible and resettable counter simultaneously possible Max. temp. +80°C (possibly limited by basic meter) Protection class: IP 65 When ordering please state: Pulse value: 0.01 / 0.1 / 1 / 10 / 100 PPL Pulse length: 2ms,10ms,20ms,40ms,100ms Analog output: Value for 4mA / Value for 20mA If we do not receive any information about the desired settings, the default will be set. 1 PPL / 2ms / 4mA = 0 / 20mA = maximum flow
Transmitter M 1000 for measuring in a fully filled pipeline For media with a solids content of max. 7% Ts Installation: assembled / separated with X m cable Housing: Cast aluminum powder-coated in IP 67 Cable entry: 2 x M 20 Ambient temperature: - 20 to + 60°C Display: LCD, Conductivity: min. 5 µS/cm (20 µS/cm for demineralized water) Outputs: Analog output: 0/4 - 20 mA / 0 - 10 mA, flow direction is displayed via a separate status output Frequency output max. 10 kHz (open collector) Status output: min./max. alarm, preset, flow direction, fault message, freely configurable Pulse output: 2 open collector, passive 32 VDC, 0-100 Hz 100 mA, 100 - 10,000 Hz 20 mA, optionally active Configuration: via RS232 or keyboard Optionally available: Hart / M-Bus / Ethernet (Modbus TCP/IP) Measuring accuracy: ± 0.3% of measured value; ±2 mm/s of measured value Reproducibility: 0.1% Measuring range: 0.03 - 12 m/s Flow direction: bi-directional possible. Standard uni-directional (in the direction of the arrow) Interface: RS232, RS485 and Modbus RTU Empty pipe detection: On/Off Medium monitoring via separate electrode Low flow suppression: 0-10% Supply: 9 - 36 VDC 1 additional grounding electrode installed in the flow meter Material: Hastelloy C -for non-earthed cables (e.g. plastic)- 1Magnetic-Inductive Flowmeter Type II Measuring range 0.09 - 2.8 m³/h Lining PFA, electrodes Hastelloy C Housing and flanges made of stainless steel 1.4301 Temperature -20...+100°C, pressure max. 16 bar (-40 ... +150°C with remote display electronics) Overall length 170 mm, connection flanges DN 10 PN 16
M1500 DA SNR: 1309-359

Badger Meter
Transmitter M 1000 for measuring in a fully filled pipeline For media with a solids content of max. 7% Ts Installation: assembled / separated with X m cable Housing: Cast aluminum powder-coated in IP 67 Cable entry: 2 x M 20 Ambient temperature: - 20 to + 60°C Display: LCD, Conductivity: min. 5 µS/cm (20 µS/cm for demineralized water) Outputs: Analog output: 0/4 - 20 mA / 0 - 10 mA, flow direction is displayed via a separate status output Frequency output max. 10 kHz (open collector) Status output: min./max. alarm, preset, flow direction, fault message, freely configurable Pulse output: 2 open collector, passive 32 VDC, 0-100 Hz 100 mA, 100 - 10,000 Hz 20 mA, optionally active Configuration: via RS232 or keyboard Optionally available: Hart / M-Bus / Ethernet (Modbus TCP/IP) Measuring accuracy: ± 0.3% of measured value; ±2 mm/s of measured value Reproducibility: 0.1% Measuring range: 0.03 - 12 m/s Flow direction: bi-directional possible. Standard uni-directional (in the direction of the arrow) Interface: RS232, RS485 and Modbus RTU Empty pipe detection: On/Off Medium monitoring via separate electrode Low flow suppression: 0-10% Supply: 9 - 36 VDC 1 additional grounding electrode installed in the flow meter Material: Hastelloy C -for non-earthed cables (e.g. plastic)- 1Magnetic-Inductive Flowmeter Type II Measuring range 0.09 - 2.8 m³/h Lining PFA, electrodes Hastelloy C Housing and flanges made of stainless steel 1.4301 Temperature -20...+100°C, pressure max. 16 bar (-40 ... +150°C with remote display electronics) Overall length 170 mm, connection flanges DN 10 PN 16
MID M 1000 Badger DN 25 / PN 16 hard rubber Hastelloy C 24VDC + grounding electrode 1M-A-010FECS3HAXS-SAABCXWWDBARXX-EAFBM Magnetic-inductive flow meter type ModMAG M1000 Type ModMAG M1000 Sensor: Type II Process connection: Flange EN 1092-1 / St. 37 DN/PN: DN 25 / PN 16 *Measuring range: 0.88 - 353 l/min Installation length: 225 mm Lining: Hard rubber Max. temp.: 80 °C Electrodes: Measuring and idle electrodes and grounding electrode Electrical material: Hastelloy C Housing: St. 37 painted gray Transmitter : Type M1000 Installation : Assembled version Software language : English/German * Units of measurement : Metric Current output : 0/4-20 mA * End value scale : Standard (2.5 m/s) Pulse output : Active 24 V DC / passive * Pulse rate : Standard LCD display : 4 lines Flow display : 8 digits (uni-/bidirectional) 2 totalizers : 14 digits Protection class : IP 67 Power supply : 9 - 36 VDC Min. conductivity : 5 microS/cm *Measurement accuracy : +/- 0.3% of the measured value Ambient temperature -20°C to + 60°C
Seriennummer: 1206-180

Badger Meter
MID M 1000 Badger DN 25 / PN 16 hard rubber Hastelloy C 24VDC + grounding electrode 1M-A-010FECS3HAXS-SAABCXWWDBARXX-EAFBM Magnetic-inductive flow meter type ModMAG M1000 Type ModMAG M1000 Sensor: Type II Process connection: Flange EN 1092-1 / St. 37 DN/PN: DN 25 / PN 16 *Measuring range: 0.88 - 353 l/min Installation length: 225 mm Lining: Hard rubber Max. temp.: 80 °C Electrodes: Measuring and idle electrodes and grounding electrode Electrical material: Hastelloy C Housing: St. 37 painted gray Transmitter : Type M1000 Installation : Assembled version Software language : English/German * Units of measurement : Metric Current output : 0/4-20 mA * End value scale : Standard (2.5 m/s) Pulse output : Active 24 V DC / passive * Pulse rate : Standard LCD display : 4 lines Flow display : 8 digits (uni-/bidirectional) 2 totalizers : 14 digits Protection class : IP 67 Power supply : 9 - 36 VDC Min. conductivity : 5 microS/cm *Measurement accuracy : +/- 0.3% of the measured value Ambient temperature -20°C to + 60°C
MID M 1000 Badger DN 10 / PN 16 PFA Hastelloy C 24VDC + grounding electrode 1M-A-004FECS3AAXS-SAABCXWWDBARXX-EAFBM Magnetic-inductive flow meter type ModMAG M1000 Type ModMAG M1000 Sensor: Type II Process connection: Flange in accordance with EN 1092 / stainless steel 1.4301 DN/PN: DN 10 / PN 16 Measuring range: 0.14 - 57 l/min Installation length: 170 mm Lining: PFA Max. temp.: 90 °C Electrodes: Measuring, idle and grounding electrode Electrical material: Hastelloy C Housing: stainless steel 1.4301 Transmitter : Type M1000 Installation : Assembled version Software language : English/German * Units of measurement : Metric Current output : 0/4-20 mA * End value scale : Standard (2.5 m/s) Pulse output : Active 24 V DC / passive * Pulse rate : Standard LCD display : 4 lines Flow display : 8 digits (uni-/bidirectional) 2 totalizers : 14 digits Protection class : IP 67 Power supply : 9 - 36 VDC Min. conductivity : 5 microS/cm *Measurement accuracy : +/- 0.3% of the measured value Ambient temperature -20°C to + 60°C
Seriennummer: 1206-177

Badger Meter
MID M 1000 Badger DN 10 / PN 16 PFA Hastelloy C 24VDC + grounding electrode 1M-A-004FECS3AAXS-SAABCXWWDBARXX-EAFBM Magnetic-inductive flow meter type ModMAG M1000 Type ModMAG M1000 Sensor: Type II Process connection: Flange in accordance with EN 1092 / stainless steel 1.4301 DN/PN: DN 10 / PN 16 Measuring range: 0.14 - 57 l/min Installation length: 170 mm Lining: PFA Max. temp.: 90 °C Electrodes: Measuring, idle and grounding electrode Electrical material: Hastelloy C Housing: stainless steel 1.4301 Transmitter : Type M1000 Installation : Assembled version Software language : English/German * Units of measurement : Metric Current output : 0/4-20 mA * End value scale : Standard (2.5 m/s) Pulse output : Active 24 V DC / passive * Pulse rate : Standard LCD display : 4 lines Flow display : 8 digits (uni-/bidirectional) 2 totalizers : 14 digits Protection class : IP 67 Power supply : 9 - 36 VDC Min. conductivity : 5 microS/cm *Measurement accuracy : +/- 0.3% of the measured value Ambient temperature -20°C to + 60°C
MID 1000 with Badger flange DN 100/16 Hard rubber Hastelloy C 24VDC MID 2-100/16-F/St-HG-ML/HC-St M10DM Magnetic-inductive flow meter Type ModMAG M1000 Sensor: Type II Process connection: Flange EN 1092-1 / St. 37 DN/PN: 100/16 *Measuring range: 0.8 - 339 m3/h Installation length: 280 mm Lining: Hard rubber Max. temp.: 80 °C Electrodes: Measuring and idle electrodes Electrical material: Hastelloy C Housing: St. 37 painted gray Transmitter: Type M1000 Installation: Assembled version Software language: English/German * Units of measurement: Metric Current output: 0/4-20 mA * End value scale: 140 m3/h Pulse output: Active 24 V DC / passive * Pulse rate: Standard (1 PPm³) LCD display: 4 lines Flow display: 8 digits (uni-/bidirectional) 2 totalizers: 14 digits Protection class: IP 67 Auxiliary power: 9 - 36 VDC Min. conductivity: 5 microS/cm *Measurement accuracy: +/- 0.3% of the measured value Customs tariff number: 9026 10 21 Country of origin: Czech Republic 9011496 MID M 1000 with Badger flange DN 100 hard rubber Hastelloy C 24VDC Magnetic-inductive flow meter Type ModMAG M1000 Sensor: Type II Process connection: Flange EN 1092-1 / St. 37 DN/PN: 100/16 *Measuring range: 0.8 - 339 m3/h Installation length: 280 mm Lining: Hard rubber Max. temp.: 80 °C Electrodes: Measuring and idle electrodes Electrical material: Hastelloy C Housing: St. 37 painted gray Measuring transducer: Type M1000 Installation: Assembled version Software language: English/German * Units of measurement: Metric Current output: 0/4-20 mA * End value scale: 140 m3/h Pulse output: Active 24 V DC / passive * Pulse rate: Standard (1 PPm³) LCD display: 4 lines Flow display: 8 digits (uni-/bidirectional) 2 totalizers: 14 digits Protection class: IP 67 Auxiliary power: 9 - 36 VDC Min. conductivity: 5 microS/cm *Measurement accuracy: +/- 0.25% of measured value
Seriennummer: 1206-133

Badger Meter
MID 1000 with Badger flange DN 100/16 Hard rubber Hastelloy C 24VDC MID 2-100/16-F/St-HG-ML/HC-St M10DM Magnetic-inductive flow meter Type ModMAG M1000 Sensor: Type II Process connection: Flange EN 1092-1 / St. 37 DN/PN: 100/16 *Measuring range: 0.8 - 339 m3/h Installation length: 280 mm Lining: Hard rubber Max. temp.: 80 °C Electrodes: Measuring and idle electrodes Electrical material: Hastelloy C Housing: St. 37 painted gray Transmitter: Type M1000 Installation: Assembled version Software language: English/German * Units of measurement: Metric Current output: 0/4-20 mA * End value scale: 140 m3/h Pulse output: Active 24 V DC / passive * Pulse rate: Standard (1 PPm³) LCD display: 4 lines Flow display: 8 digits (uni-/bidirectional) 2 totalizers: 14 digits Protection class: IP 67 Auxiliary power: 9 - 36 VDC Min. conductivity: 5 microS/cm *Measurement accuracy: +/- 0.3% of the measured value Customs tariff number: 9026 10 21 Country of origin: Czech Republic 9011496 MID M 1000 with Badger flange DN 100 hard rubber Hastelloy C 24VDC Magnetic-inductive flow meter Type ModMAG M1000 Sensor: Type II Process connection: Flange EN 1092-1 / St. 37 DN/PN: 100/16 *Measuring range: 0.8 - 339 m3/h Installation length: 280 mm Lining: Hard rubber Max. temp.: 80 °C Electrodes: Measuring and idle electrodes Electrical material: Hastelloy C Housing: St. 37 painted gray Measuring transducer: Type M1000 Installation: Assembled version Software language: English/German * Units of measurement: Metric Current output: 0/4-20 mA * End value scale: 140 m3/h Pulse output: Active 24 V DC / passive * Pulse rate: Standard (1 PPm³) LCD display: 4 lines Flow display: 8 digits (uni-/bidirectional) 2 totalizers: 14 digits Protection class: IP 67 Auxiliary power: 9 - 36 VDC Min. conductivity: 5 microS/cm *Measurement accuracy: +/- 0.25% of measured value
3Lubricating oil meter with preselection OG PND PG219 Oval gear meter with built-in solenoid valve Display: 5-digit LCD display, 10 mm high Resolution: 0.005 l Measuring range: 1-35 l/min (depending on viscosity) suitable for a viscosity range of 8 - 2000 mPas Accuracy: ± 0.5% Pressure: max. 65 bar min. pre-pressure: 0.35 bar Temperature: max. 50°C Housing: aluminum Seal: Buna Oval wheels: Vectra Connection: 1/2" BSPP Power supply: Battery, 4x AAA batteries replaceable Protection class IP 42 incl. swivel joint and curved, flexible spout 90° and automatic valve Weight: approx. 1.5 KG
102430

Badger Meter
3Lubricating oil meter with preselection OG PND PG219 Oval gear meter with built-in solenoid valve Display: 5-digit LCD display, 10 mm high Resolution: 0.005 l Measuring range: 1-35 l/min (depending on viscosity) suitable for a viscosity range of 8 - 2000 mPas Accuracy: ± 0.5% Pressure: max. 65 bar min. pre-pressure: 0.35 bar Temperature: max. 50°C Housing: aluminum Seal: Buna Oval wheels: Vectra Connection: 1/2" BSPP Power supply: Battery, 4x AAA batteries replaceable Protection class IP 42 incl. swivel joint and curved, flexible spout 90° and automatic valve Weight: approx. 1.5 KG
1/2" control valve type RC 200 (807) # 1002-GC-N-36-SV-OS-BEP-36 Valve Body: Straight, 316 SST Connection: 1/2"NPT internal thread Valve head: Standard, 316SST Inner fitting: Size "B" =%, Kvs=1.70 Material: Cone 316SST / Seat 316SST Packing: TFE roof collars Actuator: Pneumatic, Type 754, Spring closes, signal 0.2-1 bar, Connection: 1/4"NPT Positioner: Without Assembly grease: Silicone-containing "Dow 111" Weight: approx. 3 KG
1002GCN36SVOSBEP36

Badger Meter
1/2" control valve type RC 200 (807) # 1002-GC-N-36-SV-OS-BEP-36 Valve Body: Straight, 316 SST Connection: 1/2"NPT internal thread Valve head: Standard, 316SST Inner fitting: Size "B" =%, Kvs=1.70 Material: Cone 316SST / Seat 316SST Packing: TFE roof collars Actuator: Pneumatic, Type 754, Spring closes, signal 0.2-1 bar, Connection: 1/4"NPT Positioner: Without Assembly grease: Silicone-containing "Dow 111" Weight: approx. 3 KG
1 transmitter M 1000 for measuring in a fully filled pipeline For media with a solids content of max. 7% Ts Installation: assembled / separated with X m cable Housing: Cast aluminum powder-coated in IP 67 Cable entry: 2 x M 20 Ambient temperature: - 20 to + 60°C Display: LCD Conductivity: min. 5 µS/cm (20 µS/cm for demineralized water) Outputs: Analog output: 0/4 - 20 mA / 0 - 10 mA, flow direction is displayed via a separate status output Frequency output max. 10 kHz (open collector) Status output: min./max. alarm, preset, flow direction, fault message, freely configurable Pulse output: 2 open collector, passive 32 VDC, 0-100 Hz 100 mA, 100 - 10,000 Hz 20 mA, optionally active Configuration: via RS232 or keyboard Optionally available: Hart / M-Bus / Ethernet (Modbus TCP/IP) Measuring accuracy: ± 0.3% of measured value; ±2 mm/s of measured value Reproducibility: 0.1% Measuring range: 0.03 - 12 m/s Flow direction: bi-directional possible. Standard uni-directional (in the direction of the arrow) Interface: RS232, RS485 and Modbus RTU Empty pipe detection: On/Off; medium monitoring via separate electrode Low flow suppression: 0-10% Supply: 92 - 275 VAC 1 additional grounding electrode installed in the flow meter Material: Hastelloy C -for non-earthed cables (e.g. plastic)- 1Magnetic-Inductive Flowmeter Type II Measuring range 1.4 - 45 m³/h Lining hard rubber, electrodes Hastelloy C Lining with drinking water approval (WRAS certified) Housing and flanges: painted steel Temperature 0... +80°C, pressure max. 16 bar Overall length 200 mm Connection flanges DN 40 PN 16
M1000 according to SNR: 1808-361

Badger Meter
1 transmitter M 1000 for measuring in a fully filled pipeline For media with a solids content of max. 7% Ts Installation: assembled / separated with X m cable Housing: Cast aluminum powder-coated in IP 67 Cable entry: 2 x M 20 Ambient temperature: - 20 to + 60°C Display: LCD Conductivity: min. 5 µS/cm (20 µS/cm for demineralized water) Outputs: Analog output: 0/4 - 20 mA / 0 - 10 mA, flow direction is displayed via a separate status output Frequency output max. 10 kHz (open collector) Status output: min./max. alarm, preset, flow direction, fault message, freely configurable Pulse output: 2 open collector, passive 32 VDC, 0-100 Hz 100 mA, 100 - 10,000 Hz 20 mA, optionally active Configuration: via RS232 or keyboard Optionally available: Hart / M-Bus / Ethernet (Modbus TCP/IP) Measuring accuracy: ± 0.3% of measured value; ±2 mm/s of measured value Reproducibility: 0.1% Measuring range: 0.03 - 12 m/s Flow direction: bi-directional possible. Standard uni-directional (in the direction of the arrow) Interface: RS232, RS485 and Modbus RTU Empty pipe detection: On/Off; medium monitoring via separate electrode Low flow suppression: 0-10% Supply: 92 - 275 VAC 1 additional grounding electrode installed in the flow meter Material: Hastelloy C -for non-earthed cables (e.g. plastic)- 1Magnetic-Inductive Flowmeter Type II Measuring range 1.4 - 45 m³/h Lining hard rubber, electrodes Hastelloy C Lining with drinking water approval (WRAS certified) Housing and flanges: painted steel Temperature 0... +80°C, pressure max. 16 bar Overall length 200 mm Connection flanges DN 40 PN 16
1 set of grounding rings for DN6-DN50 (2 pieces), material 1.4301/ AISI 304 for non-earthed cables (e.g. plastic)
optional

Badger Meter
1 set of grounding rings for DN6-DN50 (2 pieces), material 1.4301/ AISI 304 for non-earthed cables (e.g. plastic)
XMTR PFT1E PULSES PER

Badger Meter
XMT-DS-00738

Badger Meter
Ursprungszeugnis E1

Badger Meter
RCDL IG-PM5-1 M/P40

Badger Meter
RCDL 70

Badger Meter
RC200

Badger Meter
PFT-1E

Badger Meter
MS28-RS

Badger Meter
MODEl M1500 6"

Badger Meter