"Erichsen" markasına ait modeller;
Scratch pen after van Laar, Model 426
00940131

Erichsen
Scratch pen after van Laar, Model 426
SCRATCH HARDNESS TESTER 413 Basic unit with motor-driven (5 rpm) specimen table (Ø 115 mm) for clamping test panels of max. size 100 x 100 x 22 mm or Ø 140 mm x 22 mm. The scope of supply includes: Scaled load arm for fixing the test tool and with device for radial fine adjustment (micrometer), 2 weights for the load ranges 1 N and 10 N, 1 counterweight with spirit level, box level, magnifying glass, carrying case and Manufacturer's Test Certificate M. Power supply: 230 VAC, 50 Hz (Other voltages on request - surcharge)
01020131

Erichsen
SCRATCH HARDNESS TESTER 413 Basic unit with motor-driven (5 rpm) specimen table (Ø 115 mm) for clamping test panels of max. size 100 x 100 x 22 mm or Ø 140 mm x 22 mm. The scope of supply includes: Scaled load arm for fixing the test tool and with device for radial fine adjustment (micrometer), 2 weights for the load ranges 1 N and 10 N, 1 counterweight with spirit level, box level, magnifying glass, carrying case and Manufacturer's Test Certificate M. Power supply: 230 VAC, 50 Hz (Other voltages on request - surcharge)
LINEARTESTER 249 Scratch hardness tester Scratching force in the range (0.5 - 20) N, with electromotive drive, 4-way adjustable load arm; Standard height = approx. 10 mm (+ 20 mm / + 40 mm / + 60 mm) *, including Allen key, Circular bubble, power supply and operating instructions Mains connection: (100 - 240) VAC, (47 - 63) Hz * To use the single scratch function within the height adjustment (from + 20 mm / + 40 mm / + 60 mm) is also the respective one Scenery increase (not included in the standard scope of delivery) to use.
02630131

Erichsen
LINEARTESTER 249 Scratch hardness tester Scratching force in the range (0.5 - 20) N, with electromotive drive, 4-way adjustable load arm; Standard height = approx. 10 mm (+ 20 mm / + 40 mm / + 60 mm) *, including Allen key, Circular bubble, power supply and operating instructions Mains connection: (100 - 240) VAC, (47 - 63) Hz * To use the single scratch function within the height adjustment (from + 20 mm / + 40 mm / + 60 mm) is also the respective one Scenery increase (not included in the standard scope of delivery) to use.
Hardness test rod, model 318 including test probe no. 1 (acc. to Bosch, 0.75 mm Ø) and 3 springs
Modell 318

Erichsen
Hardness test rod, model 318 including test probe no. 1 (acc. to Bosch, 0.75 mm Ø) and 3 springs
for thickness measurement of organic coatings on all Substrates according to the wedge-cut method, with rotatable and laterally displaceable microscope for measuring ellipsoidal Drill holes. The delivery includes: Drill 5 for layer thicknesses up to 300 μm (scale factor 3 μm / Skt., Cutting angle 8.5 °), 2 felt-tip pens (black / silver), screwdriver, Rechargeable battery (9 volts), power adapter (100 - 240 VAC, 47 - 63 Hz) and plastic case
Paint Borer Modell 518mc

Erichsen
for thickness measurement of organic coatings on all Substrates according to the wedge-cut method, with rotatable and laterally displaceable microscope for measuring ellipsoidal Drill holes. The delivery includes: Drill 5 for layer thicknesses up to 300 μm (scale factor 3 μm / Skt., Cutting angle 8.5 °), 2 felt-tip pens (black / silver), screwdriver, Rechargeable battery (9 volts), power adapter (100 - 240 VAC, 47 - 63 Hz) and plastic case
Calibration with creation of a manufacturer test certificate M / Hardness test rod Mod 318 including 3 springs and test tip
04370132 (Optional)

Erichsen
Calibration with creation of a manufacturer test certificate M / Hardness test rod Mod 318 including 3 springs and test tip
Coatmaster 510

Erichsen
Model 295

Erichsen
Modell 305 (03050251) Alternative

Erichsen
Modell 305 (03050151)

Erichsen
Multi-Cross Cutter Model 295

Erichsen
Wet Film Thickness Gauge, Model 234 R/III DIN, ISO, ASTM, BS, NF Measuring range 0 - 125 μm, graduation 5 μm incl. manufacturer's test certificate M
00710331

Erichsen
Wet Film Thickness Gauge, Model 234 R/III DIN, ISO, ASTM, BS, NF Measuring range 0 - 125 μm, graduation 5 μm incl. manufacturer's test certificate M
VDA Select Module M consisting of: - firing device and acceleration tube, - manual specimen pressing device, - 1 kg steel shot GH Diamant 06302.
29060132

Erichsen
VDA Select Module M consisting of: - firing device and acceleration tube, - manual specimen pressing device, - 1 kg steel shot GH Diamant 06302.
van Laar test probe (Ø 0.5 mm) (short shaft without clamping surface)
05390132

Erichsen
van Laar test probe (Ø 0.5 mm) (short shaft without clamping surface)
Test probe no. 3 (according to van Laar; 0.5 mm Ø)
04280432

Erichsen
Test probe no. 3 (according to van Laar; 0.5 mm Ø)
Test probe No. 2 (based on ISO 1518; 1.0 mm Ø)
04280332

Erichsen
Test probe No. 2 (based on ISO 1518; 1.0 mm Ø)
Test probe no. 1 (according to Bosch 0.75 mm Ø)
04280232

Erichsen
Test probe no. 1 (according to Bosch 0.75 mm Ø)
Test piece made of high-density special felt to the MEK test set (per 100 pieces)
08410132

Erichsen
Test piece made of high-density special felt to the MEK test set (per 100 pieces)
SURFACE SCRATCH TESTER
413

Erichsen
SURFACE SCRATCH TESTER
Stone chip tester MULTI GRIT TESTER 508 Select Electro-pneumatically controlled multi-impact testing device (basic device) with pressure vessel; automatic menu navigation via touch panel; adjustable vibratory feeder for feeding the shelling granules; including operating instructions. Modular system prepared for optional connection a VDA Select module (with manual or pneumatic specimen pressure device) or an SAE Select module. Power supply: 85-264 VAC / 47-63 Hz (control voltage 24 V)
29040131

Erichsen
Stone chip tester MULTI GRIT TESTER 508 Select Electro-pneumatically controlled multi-impact testing device (basic device) with pressure vessel; automatic menu navigation via touch panel; adjustable vibratory feeder for feeding the shelling granules; including operating instructions. Modular system prepared for optional connection a VDA Select module (with manual or pneumatic specimen pressure device) or an SAE Select module. Power supply: 85-264 VAC / 47-63 Hz (control voltage 24 V)