"Erichsen" markasına ait modeller;
Manufacturer test certificate M according to DIN 55 350, Part 18, including inspection and calibration/recalibration for scoring pencil according to van Laar, model 426
16295532

Erichsen
Manufacturer test certificate M according to DIN 55 350, Part 18, including inspection and calibration/recalibration for scoring pencil according to van Laar, model 426
Manufacturer test certificate M according to DIN 55 350, part 18, including inspection and calibration/recalibration for cutting bodies (Mod. 295)
16292432

Erichsen
Manufacturer test certificate M according to DIN 55 350, part 18, including inspection and calibration/recalibration for cutting bodies (Mod. 295)
LOAD CELL 2.5KN
0226.10.31

Erichsen
LOAD CELL 2.5KN
High-pressure hose line / 1.5 m
05730232

Erichsen
High-pressure hose line / 1.5 m

High-pressure hose line / 0.63 m
05730132 (Alternative)

Erichsen
High-pressure hose line / 0.63 m
HB pencil
910919148

Erichsen
HB pencil
Hardness test bar, model 318 including test probe no. 1 (according to Bosch, 0.75 mm Ø) and 3 springs
00200131

Erichsen
Hardness test bar, model 318 including test probe no. 1 (according to Bosch, 0.75 mm Ø) and 3 springs
H pencil
910919150

Erichsen
H pencil
Gloss meter PICOGLOSS 503 Three-angle gloss meter 20°/60°/85°, with color display, Measured value memory, statistics function and USB (mini) interface, including gloss standard A, USB cable, battery, wrist strap, Carrying case, calibration certificate, quick start guide.
01760431

Erichsen
Gloss meter PICOGLOSS 503 Three-angle gloss meter 20°/60°/85°, with color display, Measured value memory, statistics function and USB (mini) interface, including gloss standard A, USB cable, battery, wrist strap, Carrying case, calibration certificate, quick start guide.
Force gauge, model 833 - 2.5 kN with manufacturer test certificate M equipped with throttle as standard
02240131

Erichsen
Force gauge, model 833 - 2.5 kN with manufacturer test certificate M equipped with throttle as standard
for thickness measurement of organic coatings on all Substrates according to the wedge-cut method, with rotatable and laterally movable microscope for measuring ellipsoidal drill holes. The scope of delivery includes: Drill 5 for layer thicknesses up to 300 μm (scale factor 3 μm/section, cutting angle 8.5°), 2 felt-tip pens (black/silver), screwdriver, rechargeable battery (9 volts), plug-in power supply (100 - 240 VAC, 47 - 63 Hz) and plastic case; without manufacturer test certificate.
PAINT BORER 518 MC

Erichsen
for thickness measurement of organic coatings on all Substrates according to the wedge-cut method, with rotatable and laterally movable microscope for measuring ellipsoidal drill holes. The scope of delivery includes: Drill 5 for layer thicknesses up to 300 μm (scale factor 3 μm/section, cutting angle 8.5°), 2 felt-tip pens (black/silver), screwdriver, rechargeable battery (9 volts), plug-in power supply (100 - 240 VAC, 47 - 63 Hz) and plastic case; without manufacturer test certificate.
F pencil
910919149

Erichsen
F pencil
extern Serial Nr. 140804 + external load cell 906 USB 500N Serial Nr. 1209 + Global spring
Physimeter 906 USB

Erichsen
extern Serial Nr. 140804 + external load cell 906 USB 500N Serial Nr. 1209 + Global spring
Drill 5 (spare) Made of solid carbide with double-edge geometry for layer thicknesses up to 300 µm (scale factor 3 µm/skt., cutting angle 8.5°)
910928241

Erichsen
Drill 5 (spare) Made of solid carbide with double-edge geometry for layer thicknesses up to 300 µm (scale factor 3 µm/skt., cutting angle 8.5°)
Drill 4 Made of solid carbide with double-edge geometry for layer thicknesses up to 500 µm (scale factor 5 µm/skt., cutting angle 14°)
910927741

Erichsen
Drill 4 Made of solid carbide with double-edge geometry for layer thicknesses up to 500 µm (scale factor 5 µm/skt., cutting angle 14°)
Drill 3 Made of solid carbide with double-edge geometry for layer thicknesses up to 1000 µm (scale factor 10 µm/skt., cutting angle 26.7°)
910927841

Erichsen
Drill 3 Made of solid carbide with double-edge geometry for layer thicknesses up to 1000 µm (scale factor 10 µm/skt., cutting angle 26.7°)
Drill 2 Made of solid carbide with double-edge geometry for layer thicknesses up to 200 µm (scale factor 2 µm/skt., cutting angle 5.7°)
910927241

Erichsen
Drill 2 Made of solid carbide with double-edge geometry for layer thicknesses up to 200 µm (scale factor 2 µm/skt., cutting angle 5.7°)
Drill 1 Made of solid carbide with cutting geometry for layer thicknesses up to 2000 µm (scale factor 20 µm/skt., cutting angle 45°)
910927141

Erichsen
Drill 1 Made of solid carbide with cutting geometry for layer thicknesses up to 2000 µm (scale factor 20 µm/skt., cutting angle 45°)
Diamond test tip according to DIN EN 438-2 and ISO 4586-2 (Cone angle 90 °, tip radius 90 μm)
02180132(optional)

Erichsen
Diamond test tip according to DIN EN 438-2 and ISO 4586-2 (Cone angle 90 °, tip radius 90 μm)
cutting body with 6 cutting edges, cutting distance 2 mm without manufacturer test certificate M (f. Mod. 295/II,295/X, 404)
04330232

Erichsen
cutting body with 6 cutting edges, cutting distance 2 mm without manufacturer test certificate M (f. Mod. 295/II,295/X, 404)