Kategoriler
Item No.: 89763 CONTOIL® oil meter with reed pulse generator Pulse value 1.25 ml Measuring principle: ring piston Nominal pressure: PN 25 Nominal width: DN 4 mm with internal thread for copper pipe fitting: 1/8" Installation position: horizontal/vertical Max flow: 80L/h Continuous flow: 50 l/h Minimum flow: 1 l/h Max. allowed temperature: 60°C Amount total on roller counter: 100'000l Pulse value: 0.00125 l Minimum readable volume: 0.001 l Deviation: 1 - 2 l/h ± 2.5% of the measured value 2 - 80 l/h ± 1% of the measured value Repeatability: Built-in safety filter: 0.125 mm
Aquametro - VZO 4 -RE 0,00125

Item No.: 89763 CONTOIL® oil meter with reed pulse generator Pulse value 1.25 ml Measuring principle: ring piston Nominal pressure: PN 25 Nominal width: DN 4 mm with internal thread for copper pipe fitting: 1/8" Installation position: horizontal/vertical Max flow: 80L/h Continuous flow: 50 l/h Minimum flow: 1 l/h Max. allowed temperature: 60°C Amount total on roller counter: 100'000l Pulse value: 0.00125 l Minimum readable volume: 0.001 l Deviation: 1 - 2 l/h ± 2.5% of the measured value 2 - 80 l/h ± 1% of the measured value Repeatability: Built-in safety filter: 0.125 mm
IN/OUT PRESSURE: 3KG.CM2 / 0.95 KG/CM2, MAX PRESSURE: 4KG/CM2;390 - 520 NM3/H; FULL CAP.:3673, SPARES KIT, CODE: 2309-03; SIZE 50MM,
Elster - 2/ P/F GAS PRESSURE REGULATORS,

IN/OUT PRESSURE: 3KG.CM2 / 0.95 KG/CM2, MAX PRESSURE: 4KG/CM2;390 - 520 NM3/H; FULL CAP.:3673, SPARES KIT, CODE: 2309-03; SIZE 50MM,
IN/OUT PRESSURE: 3KG.CM2 / 0.95 KG/CM2, MAX PRESSURE: 4KG/CM2;390 - 520 NM3/H; FULL CAP.:3673, LOADING SPRING, 140 TO 1035 MBAR; 2-15PSIG; LIGHT GREEN/BLUE, PART NO.: J12309-051",
Elster - 1/ P/F GAS PRESSURE REGULATORS,

IN/OUT PRESSURE: 3KG.CM2 / 0.95 KG/CM2, MAX PRESSURE: 4KG/CM2;390 - 520 NM3/H; FULL CAP.:3673, LOADING SPRING, 140 TO 1035 MBAR; 2-15PSIG; LIGHT GREEN/BLUE, PART NO.: J12309-051",

HFVM11L729HNC3FJREZZZ 95431 Heavy Fuel Viscosity Meter Viscomaster 1 Sensor Range And Performance: Viscosity accuracy ±0.2cP (0-10cP range) then ± 1% FS of calibrated range, Viscosity limit 20,000cP 1 Immersion depth: 0mm: no stem extension and with standard spigot L Wetted parts: 316L Stainless, Diamond Like Carbon coated tines 729 Process connection: 1 1/2-inch Cone Seat Compression fitting 316/316L H Calibration: 2 1/2-inch schedule 40 boundary (Viscosity limits 200cSt=T piece) N Transmitter Housing Option: AquaMetro REDUCED FUNCTIONALITY version (red + Aquametro label) C Output signal: Integral transmitter, channel A = mA + HART, Channel B = mA output, Channel C = RS485 Modbus 3 Indicator: No F Ex approval ATEX flameproof J Application Configuration: Line Viscosity; [4mA=0cSt, 20mA=50cSt] R Calibration range: 5 to 50cP viscosity calibration only, no density calibration) E Language: English inst. Manual config and English. manual Z Future Option 1: Reserved for future options Z Cable entries: 1/2 ´´NPT Z Factory option: Standard product 200966
Aquametro - AM Viscomaster Dynamic

HFVM11L729HNC3FJREZZZ 95431 Heavy Fuel Viscosity Meter Viscomaster 1 Sensor Range And Performance: Viscosity accuracy ±0.2cP (0-10cP range) then ± 1% FS of calibrated range, Viscosity limit 20,000cP 1 Immersion depth: 0mm: no stem extension and with standard spigot L Wetted parts: 316L Stainless, Diamond Like Carbon coated tines 729 Process connection: 1 1/2-inch Cone Seat Compression fitting 316/316L H Calibration: 2 1/2-inch schedule 40 boundary (Viscosity limits 200cSt=T piece) N Transmitter Housing Option: AquaMetro REDUCED FUNCTIONALITY version (red + Aquametro label) C Output signal: Integral transmitter, channel A = mA + HART, Channel B = mA output, Channel C = RS485 Modbus 3 Indicator: No F Ex approval ATEX flameproof J Application Configuration: Line Viscosity; [4mA=0cSt, 20mA=50cSt] R Calibration range: 5 to 50cP viscosity calibration only, no density calibration) E Language: English inst. Manual config and English. manual Z Future Option 1: Reserved for future options Z Cable entries: 1/2 ´´NPT Z Factory option: Standard product 200966
gas pressure regulator with SBV default setting pd 50 mbar pso 200 mbar psu 25 mbar pdso 150 mbar industrial design CE approval Flange connection DN 50, PN 16, Inlet pressure pu: max. 6 bar Length: 220mm
Elster - MR 50 SF, PN 6, SBV

gas pressure regulator with SBV default setting pd 50 mbar pso 200 mbar psu 25 mbar pdso 150 mbar industrial design CE approval Flange connection DN 50, PN 16, Inlet pressure pu: max. 6 bar Length: 220mm
Flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 40 m3/h, measuring range: 3.3-65 m3/h(b), Rp internal thread, DN 25, E1: 10 pulses/m3, E200: 500 pulses/m3 pu max. 4 bar, for gas and air Stat. Warennummer 90281000 Ursprungsland: SK
Elster - QA 40R25-40

Flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 40 m3/h, measuring range: 3.3-65 m3/h(b), Rp internal thread, DN 25, E1: 10 pulses/m3, E200: 500 pulses/m3 pu max. 4 bar, for gas and air Stat. Warennummer 90281000 Ursprungsland: SK
Flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 250 m3/h, measuring range: 20-400 m3/h(b) Intermediate flange DN 80, E1: 1 pulse/m3, E200: 187.5 pulses/m3 pu max. 4 bar, for gas and air Stat. Warennummer 90281000
Elster - QA 250Z800-40

Flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 250 m3/h, measuring range: 20-400 m3/h(b) Intermediate flange DN 80, E1: 1 pulse/m3, E200: 187.5 pulses/m3 pu max. 4 bar, for gas and air Stat. Warennummer 90281000
FI - Flow Indicator, P Max: 18.8 Bar, QMIN: 800 M3/H, QMAX: 16000M3/H, Grate: 10000
Elster - SM-RI-X-L

FI - Flow Indicator, P Max: 18.8 Bar, QMIN: 800 M3/H, QMAX: 16000M3/H, Grate: 10000
CONTOIL® flow meter for mineral oil. Electronic counter with display. Properties: Display of total amount, Quantity resettable (up to 8 counters, 4 from resettable), flow rate, Temperature, mass and normalized volume in m3, liters, US gallons or tons, Kilograms and pounds. Configurable outputs. Nominal diameter: DN 50mm Connection flanges: DN 50 Nominal pressure: PN 25bar Overall length: 350mm Installation position: horizontal / vertical Temperature max .: 130 ° C Measuring range: 750 ... 30000l / h Max. Continuous flow: 20000l / h Max. Measurement deviation: ± 1% of the measured value Repeatability: ± 0.2% Registration ability: 100Mio Display LCD: 8 digits 8mm high Outputs: 1 analog and 2 digital Analog: 4 ... 20mA Digital: pulses, frequency, logic Nominal voltage: 24V DC Supply via 4 ... 20mA: 6 ... 30V DC Protection class: IP66 / IP68 / IP69 Ambient temperature: -25 ... + 70 ° C
Aquametro - VZF II 50 FL 130/25

CONTOIL® flow meter for mineral oil. Electronic counter with display. Properties: Display of total amount, Quantity resettable (up to 8 counters, 4 from resettable), flow rate, Temperature, mass and normalized volume in m3, liters, US gallons or tons, Kilograms and pounds. Configurable outputs. Nominal diameter: DN 50mm Connection flanges: DN 50 Nominal pressure: PN 25bar Overall length: 350mm Installation position: horizontal / vertical Temperature max .: 130 ° C Measuring range: 750 ... 30000l / h Max. Continuous flow: 20000l / h Max. Measurement deviation: ± 1% of the measured value Repeatability: ± 0.2% Registration ability: 100Mio Display LCD: 8 digits 8mm high Outputs: 1 analog and 2 digital Analog: 4 ... 20mA Digital: pulses, frequency, logic Nominal voltage: 24V DC Supply via 4 ... 20mA: 6 ... 30V DC Protection class: IP66 / IP68 / IP69 Ambient temperature: -25 ... + 70 ° C
Characteristics: Display of total amount, Quantity resettable (up to 8 counters, 4 from resettable), flow rate, Temperature, mass and normalized volume in m3, liters, US gallons or tons, Kilograms and pounds. Configurable outputs. Nominal diameter: DN 50mm Connection flanges: DN 50 Nominal pressure: PN 25bar Overall length: 350mm Installation position: horizontal / vertical Temperature max .: 130 ° C Measuring range: 750 ... 30000l / h Max. Continuous flow: 20000l / h Max. Measurement deviation: ± 1% of the measured value Repeatability: ± 0.2% Registration ability: 100Mio Display LCD: 8 digits 8mm high Outputs: 1 analog and 2 digital Analog: 4 ... 20mA Digital: pulses, frequency, logic Nominal voltage: 24V DC Supply via 4 ... 20mA: 6 ... 30V DC Protection class: IP66 / IP68 / IP69 Ambient temperature: -25 ... + 70 ° C
Aquametro - VZF II 50 FL 130/25

Characteristics: Display of total amount, Quantity resettable (up to 8 counters, 4 from resettable), flow rate, Temperature, mass and normalized volume in m3, liters, US gallons or tons, Kilograms and pounds. Configurable outputs. Nominal diameter: DN 50mm Connection flanges: DN 50 Nominal pressure: PN 25bar Overall length: 350mm Installation position: horizontal / vertical Temperature max .: 130 ° C Measuring range: 750 ... 30000l / h Max. Continuous flow: 20000l / h Max. Measurement deviation: ± 1% of the measured value Repeatability: ± 0.2% Registration ability: 100Mio Display LCD: 8 digits 8mm high Outputs: 1 analog and 2 digital Analog: 4 ... 20mA Digital: pulses, frequency, logic Nominal voltage: 24V DC Supply via 4 ... 20mA: 6 ... 30V DC Protection class: IP66 / IP68 / IP69 Ambient temperature: -25 ... + 70 ° C
Artikelnr.: 92041 CONTOIL® oil meter Measuring principle: ring piston Nominal pressure: PN 16 Overall length: 165 mm Nominal width: DN 15 mm with thread 3/4" for screw connections: 1/2" Installation position: horizontal/vertical Max flow: 600 l/h Continuous flow: 400 l/h Minimum flow: 20 l/h Max. allowed temperature: 130°C Amount total on roller counter: 1'000'000 l Minimum readable volume: 0.01 l Deviation: 20 - 600 l/h ± 1% of the measured value Repeatability:
Aquametro - VZO 15 RC 130/16

Artikelnr.: 92041 CONTOIL® oil meter Measuring principle: ring piston Nominal pressure: PN 16 Overall length: 165 mm Nominal width: DN 15 mm with thread 3/4" for screw connections: 1/2" Installation position: horizontal/vertical Max flow: 600 l/h Continuous flow: 400 l/h Minimum flow: 20 l/h Max. allowed temperature: 130°C Amount total on roller counter: 1'000'000 l Minimum readable volume: 0.01 l Deviation: 20 - 600 l/h ± 1% of the measured value Repeatability:
Art. Nr.: 200973 3-point-step-controll digital universal controller Dimension:96x96 mm Supply: 100..250V AC Input: -viscosity (4-20mA) 0-50cSt -temperature (4-20mA) 0-200 °C Input switchable Output: -2 analog (1 Visco & 1 Temp) -2 relay outputs
Aquametro - VC322 Viscosity Controller Step

Art. Nr.: 200973 3-point-step-controll digital universal controller Dimension:96x96 mm Supply: 100..250V AC Input: -viscosity (4-20mA) 0-50cSt -temperature (4-20mA) 0-200 °C Input switchable Output: -2 analog (1 Visco & 1 Temp) -2 relay outputs