Kategoriler
Zg-Nr. 19-01-0558 Vers. 04 ZAD_8100263 SILICON pump data Number of stages : 1 Inlet Pressure max. : 0-10 bar Work Pressure max. : 180 bar Peak Pressure max. : 200 bar (Short operation) Speed max.* : 750 min-1 Suction Port : G 1/2 Pressure Port : G 1/2 Sense of Rotation : LEFT (ccw), in View of Drive Shaft Design : External Spur Gear, bare shaft Sealing Type : Triple Radial Shaft Seal with Block Chamber Version : Prepared to mount Pressure Valve Ambient Temperature : -30°C min./ +60°C max. *Indicated maximum speed is not valid for Viscosities above 2.500 mPa*s! Materials Housing : Spheroidal Cast Iron 1 Center Plate : Spheroidal Cast Iron 1 Gears : Nitrited Steel Drive Shaft : Nitrited Steel Driven Shaft : Nitrited Steel Wear Plates : Stainless Steel 1 hardened Sleeves : High-performance Material 6 Seals : FKM PUMPE zur D 9540 - 046 809
Beinlich Pump Systems - ZPD 1-5,1-KIS-L-F/R/3F-SP/VV

Zg-Nr. 19-01-0558 Vers. 04 ZAD_8100263 SILICON pump data Number of stages : 1 Inlet Pressure max. : 0-10 bar Work Pressure max. : 180 bar Peak Pressure max. : 200 bar (Short operation) Speed max.* : 750 min-1 Suction Port : G 1/2 Pressure Port : G 1/2 Sense of Rotation : LEFT (ccw), in View of Drive Shaft Design : External Spur Gear, bare shaft Sealing Type : Triple Radial Shaft Seal with Block Chamber Version : Prepared to mount Pressure Valve Ambient Temperature : -30°C min./ +60°C max. *Indicated maximum speed is not valid for Viscosities above 2.500 mPa*s! Materials Housing : Spheroidal Cast Iron 1 Center Plate : Spheroidal Cast Iron 1 Gears : Nitrited Steel Drive Shaft : Nitrited Steel Driven Shaft : Nitrited Steel Wear Plates : Stainless Steel 1 hardened Sleeves : High-performance Material 6 Seals : FKM PUMPE zur D 9540 - 046 809
Zahnradpumpe
Kracht - KF 6 RF 7/74

Zahnradpumpe
ZA__1320007 external gear pump Number of stages : 2 theoretical Displacement : stage 1 = 37.40 cm3/rev Stage 2 = 7.80 cm3/rev Inlet pressure max. : 0-1 bar Maximum operating pressure: 100 bar Max. pressure: 100 bar (short-term operation) Maximum speed* : 1800 rpm Suction connection: stage 1 = G 1 Pressure connection: Level 2 = G 1/2 Direction of rotation : RIGHT, seen on drive shaft Type : external teeth straight, free pump shaft Type of sealing: 1-fold shaft sealing ring Execution : DISA - drive shaft with thread M8x20 * The maximum speed does not apply to viscosities over 800 mPas! Materials for level 1+2 Housing : ductile iron 1 Center plate : ductile iron 1 Gears : nitrided steel Drive shaft : Nitrided steel Pump shaft : nitrided steel Gliding goggles : high performance material 1 Plain bearing: high-performance material 1 Seal materials : NBR
Beinlich Pump Systems - ZPA 3-37,40-H/2-7,80-H-R-F-B/R

ZA__1320007 external gear pump Number of stages : 2 theoretical Displacement : stage 1 = 37.40 cm3/rev Stage 2 = 7.80 cm3/rev Inlet pressure max. : 0-1 bar Maximum operating pressure: 100 bar Max. pressure: 100 bar (short-term operation) Maximum speed* : 1800 rpm Suction connection: stage 1 = G 1 Pressure connection: Level 2 = G 1/2 Direction of rotation : RIGHT, seen on drive shaft Type : external teeth straight, free pump shaft Type of sealing: 1-fold shaft sealing ring Execution : DISA - drive shaft with thread M8x20 * The maximum speed does not apply to viscosities over 800 mPas! Materials for level 1+2 Housing : ductile iron 1 Center plate : ductile iron 1 Gears : nitrided steel Drive shaft : Nitrided steel Pump shaft : nitrided steel Gliding goggles : high performance material 1 Plain bearing: high-performance material 1 Seal materials : NBR
Weser pumps external gear - pumps WP 257 - 1 / xxx Front flange SAE B Combi Drive shaft SAE BB cyl. Ø 25.4 mm with SAE key Right-hand rotation, 94cc, 207 bar, 1500 rpm Hydr. Connections suction side: 1 x G 1 ½" - radial Hydraulic connections pressure side: 1 x G 1" - radial
Permco - P257C-386-KV-ZA22-32

Weser pumps external gear - pumps WP 257 - 1 / xxx Front flange SAE B Combi Drive shaft SAE BB cyl. Ø 25.4 mm with SAE key Right-hand rotation, 94cc, 207 bar, 1500 rpm Hydr. Connections suction side: 1 x G 1 ½" - radial Hydraulic connections pressure side: 1 x G 1" - radial
unser Kunde sucht eine geeignete Pumpe: Es sollte für den Dauereinsatz von Chemikalien wie Heizöl, AdBlue etc. geeignet sein. Durchfluss (Druckbereich etc.) Kennlinien und Grafiken (Pumpenkurven) des jeweiligen Modells können sie uns wenn verfügbar Model vorschlagen mit Datenblatt.
Fluid O Tech - Pumpe für den AdBlue

unser Kunde sucht eine geeignete Pumpe: Es sollte für den Dauereinsatz von Chemikalien wie Heizöl, AdBlue etc. geeignet sein. Durchfluss (Druckbereich etc.) Kennlinien und Grafiken (Pumpenkurven) des jeweiligen Modells können sie uns wenn verfügbar Model vorschlagen mit Datenblatt.

TYPE.TFL8-170 GDG-VLFM NOTE:AUXILLARY OIL PUMP IS USED ON LUBRICATED OIL SYSTEM OF OFF GAS COMPRESSOR COMPRESSOR MODEL: BX-45-80/63-4S2 SUPPLIER:STEIMEL GMBH CO (GERMANY) PUMP COMPLETE
Steimel - P/F GEAR OIL PUMP

TYPE.TFL8-170 GDG-VLFM NOTE:AUXILLARY OIL PUMP IS USED ON LUBRICATED OIL SYSTEM OF OFF GAS COMPRESSOR COMPRESSOR MODEL: BX-45-80/63-4S2 SUPPLIER:STEIMEL GMBH CO (GERMANY) PUMP COMPLETE

Type of control : Direct controlled Spring Type : compression spring Setting range : 0 - 50 bar Reverse Current : Internal Seal materials : FKM Material : steel PRESSURE RANGE FROM 0 - 50 BAR.
Beinlich Pump Systems - DBV-I-PI/1-06/0-50/VT/S

Type of control : Direct controlled Spring Type : compression spring Setting range : 0 - 50 bar Reverse Current : Internal Seal materials : FKM Material : steel PRESSURE RANGE FROM 0 - 50 BAR.
Type of control : Direct controlled Spring Type : compression spring Adjustment range: 50 - 200 bar Reverse Current : Internal Seal materials : FKM Material : steel DRUCKBEREICH VON 50 - 200 BAR.
Beinlich Pump Systems - DBV-I-PI/1-06/50-200/VT/S

Type of control : Direct controlled Spring Type : compression spring Adjustment range: 50 - 200 bar Reverse Current : Internal Seal materials : FKM Material : steel DRUCKBEREICH VON 50 - 200 BAR.
TRGD 05/3-0.6-200-FCV/R/K-4M0.75/MAG(10-G)/PTFE (BP:10001262 +0.75kW motor) pump unit Consisting of radial piston pump, intermediate flange Bellhousing and MAG clutch and motor pump data Level Number (Stars) : 1-Star theoretical delivery volume: 0.42 ccm/rev Direction of rotation : any Pressure connection : G3/8 Suction connection : G3/4 Vent : G1/4 Inlet pressure : 20 bar max. Operating pressure: 700 bar max. Type of sealing : via the can of the magnetic coupling Temperature : -30°C min. / +60°C max. materials Housing : 1.0570 chemically nickel-plated Shaft : stainless steel 1st Piston housing : 1.0503 nitrided Piston : nitrided steel + coating 3 Bearing : Cylindrical roller bearing with steel cage / spherical roller bearing Seal materials : PTFE drive motor Type : 4-pole three-phase motor Power : 0.75 kW Voltage : 230/400 V Speed : 1500 min-1 Degree of protection : IP55 Insulation class : F Shape : B35 Motor protection : 3 PTC thermistors Accesories MAG clutch : DST75/10-G Bellhousing : Standard motor hub intermediate flange side
Beinlich Pump Systems - DIV_9990001

TRGD 05/3-0.6-200-FCV/R/K-4M0.75/MAG(10-G)/PTFE (BP:10001262 +0.75kW motor) pump unit Consisting of radial piston pump, intermediate flange Bellhousing and MAG clutch and motor pump data Level Number (Stars) : 1-Star theoretical delivery volume: 0.42 ccm/rev Direction of rotation : any Pressure connection : G3/8 Suction connection : G3/4 Vent : G1/4 Inlet pressure : 20 bar max. Operating pressure: 700 bar max. Type of sealing : via the can of the magnetic coupling Temperature : -30°C min. / +60°C max. materials Housing : 1.0570 chemically nickel-plated Shaft : stainless steel 1st Piston housing : 1.0503 nitrided Piston : nitrided steel + coating 3 Bearing : Cylindrical roller bearing with steel cage / spherical roller bearing Seal materials : PTFE drive motor Type : 4-pole three-phase motor Power : 0.75 kW Voltage : 230/400 V Speed : 1500 min-1 Degree of protection : IP55 Insulation class : F Shape : B35 Motor protection : 3 PTC thermistors Accesories MAG clutch : DST75/10-G Bellhousing : Standard motor hub intermediate flange side
Substitute for serial no. 1426670 Screw pump 20-30-T-G Material-Nr.: 115982 Bare shaft pump.
Knoll - KTS 20-30-T-G

Substitute for serial no. 1426670 Screw pump 20-30-T-G Material-Nr.: 115982 Bare shaft pump.
Storage Multi-layer plain bearing P10 product data Geometric delivery volume 321.00 cm³/r Direction of rotation clockwise (view of shaft end) Type of fastening flange KF 5/... Yes Line connection Flange connection KF 5/... - DN 75 Shaft end cylindrical ø 28mm integrated valve DKF valve 16, 8...16 bar Any installation position Specific Dates Operating pressure (suction side) -0.4...+10 bar max. operating pressure (pressure side) 16 bar (depending on viscosity, speed and drive power) Equipment temperature -20°C...+150°C Ambient temperature -20°C...+60°C Minimum viscosity 1.4 mm²/s (max. 3 bar) 6 mm²/s (max. 12 bar) 12 mm²/s (max. operating pressure) Maximum viscosity dependent on intake conditions, speed and drive power Speed range 200...2000 rpm (depending on pressure, viscosity and drive power)
Kracht - KF 5/315 H10B N00 0VP29 + DKF 5 L 16

Storage Multi-layer plain bearing P10 product data Geometric delivery volume 321.00 cm³/r Direction of rotation clockwise (view of shaft end) Type of fastening flange KF 5/... Yes Line connection Flange connection KF 5/... - DN 75 Shaft end cylindrical ø 28mm integrated valve DKF valve 16, 8...16 bar Any installation position Specific Dates Operating pressure (suction side) -0.4...+10 bar max. operating pressure (pressure side) 16 bar (depending on viscosity, speed and drive power) Equipment temperature -20°C...+150°C Ambient temperature -20°C...+60°C Minimum viscosity 1.4 mm²/s (max. 3 bar) 6 mm²/s (max. 12 bar) 12 mm²/s (max. operating pressure) Maximum viscosity dependent on intake conditions, speed and drive power Speed range 200...2000 rpm (depending on pressure, viscosity and drive power)
Starter-Kit The CSD-25-1 Starter Kit contains the items to convert your existing pump to use the new diaphragms. Starter kits all contain 2 x new membranes, 2 x switching disks + 2 x screws
Depa Pumps - CSD-25-1*

Starter-Kit The CSD-25-1 Starter Kit contains the items to convert your existing pump to use the new diaphragms. Starter kits all contain 2 x new membranes, 2 x switching disks + 2 x screws