Kategoriler
ANALOG ASSEMBLY 6CHANNEL ROD DROP MONITOR
Bently Nevada - 87199-01

ANALOG ASSEMBLY 6CHANNEL ROD DROP MONITOR
ACCESSORY
Bently Nevada - 3308802820025020

ACCESSORY
Accelerometer, Fully isolated, 4-20mA = 0-25mm/s output,1/4 -28 UNF female mounting, Frequency response 2Hz- 1KHz, 5 metres o/b ETFE cable
Monitran - MTN/2285C-25

Accelerometer, Fully isolated, 4-20mA = 0-25mm/s output,1/4 -28 UNF female mounting, Frequency response 2Hz- 1KHz, 5 metres o/b ETFE cable
Accelerometer, 4-20mA = 0-25mm/s output, quickfit female mounting, 5 metres o/b ETFE cable.
Monitran - MTN/1185CQ-25

Accelerometer, 4-20mA = 0-25mm/s output, quickfit female mounting, 5 metres o/b ETFE cable.
accelerometer Sensitivity: 25 mV/g dynamic range: ±80g Frequency response: ±5% 2 to 10,000 Hz Temperature range: -55 to +140 °C electrical connection: cable, 5 m mech. Connection: 1/4" UNF female Weight: approx. 110 gr. IP protection class: IP67
Monitran - MTN/1100C-25

accelerometer Sensitivity: 25 mV/g dynamic range: ±80g Frequency response: ±5% 2 to 10,000 Hz Temperature range: -55 to +140 °C electrical connection: cable, 5 m mech. Connection: 1/4" UNF female Weight: approx. 110 gr. IP protection class: IP67
ACCELEROMETER
Bently Nevada - 3304000100

ACCELEROMETER
ACCELEROMETER
Bently Nevada - 200200010105

ACCELEROMETER
ACCELEROMETER
Bently Nevada - 330400-02-00

ACCELEROMETER
ACCELERATOR
Bently Nevada - 3304000205

ACCELERATOR
AC accelerometer HS-150 series, premium accelerometer with temperature output, top entry, 100mV / g Output, 10mV / ° C output (up to 100 ° C), integrated shielded PUR cable, M8 x 1.25 Grub screw, cable length: 5m.
Hansford Sensors - HS-150T1000108-005

AC accelerometer HS-150 series, premium accelerometer with temperature output, top entry, 100mV / g Output, 10mV / ° C output (up to 100 ° C), integrated shielded PUR cable, M8 x 1.25 Grub screw, cable length: 5m.
AC accelerometer HS-100 series, acceleration sensor, 100mV / g output, 2 pin MS connector, M8 x 1.25 Grub screw | Please note: A cable assembly is required to operate this sensor - please note your shielding concept.
Hansford Sensors - HS-1001005008

AC accelerometer HS-100 series, acceleration sensor, 100mV / g output, 2 pin MS connector, M8 x 1.25 Grub screw | Please note: A cable assembly is required to operate this sensor - please note your shielding concept.
63,mm/s
Bently Nevada - 190-501-00-00-00

63,mm/s