Kategoriler
UV lamp 185/254 nm for Milli-Q® Century, -Reference -Advantage, -Integral and -Direct series
Millipore - ZMQUVLP01

UV lamp 185/254 nm for Milli-Q® Century, -Reference -Advantage, -Integral and -Direct series
TTSAMPUMP100 Sample Gas Pump heated for CEM II, KNF fittings, 230V / 50Hz.
Knf - PM26938-86.16

TTSAMPUMP100 Sample Gas Pump heated for CEM II, KNF fittings, 230V / 50Hz.
Transmission GB1356 / 8.5 Gear ratio = 8.5 Manufactured including painting, without oil filling
Brinkmann - 1-0211-1008

Transmission GB1356 / 8.5 Gear ratio = 8.5 Manufactured including painting, without oil filling

Tests - Test run of the pump with function check and determination of performance data - - Performance test: 3 points Standard paint finish - Primer: 1 x 0.06 mm / Epoxy primer - Top coat: 1 x 0.06 mm / Acrylic polyurethane/ RAL 5015 Sky blue / - Stainless steel parts are not painted
Lewa - FC1

Tests - Test run of the pump with function check and determination of performance data - - Performance test: 3 points Standard paint finish - Primer: 1 x 0.06 mm / Epoxy primer - Top coat: 1 x 0.06 mm / Acrylic polyurethane/ RAL 5015 Sky blue / - Stainless steel parts are not painted
Suction pump with motor 0.48kW F IP 55 IE3 220-240/380-415V, 50Hz
Brinkmann - SB60+001

Suction pump with motor 0.48kW F IP 55 IE3 220-240/380-415V, 50Hz
Suction pump with motor 0.22kW F IP 55 IE2 220-240/380-415V, 50Hz
Brinkmann - SB20+001

Suction pump with motor 0.22kW F IP 55 IE2 220-240/380-415V, 50Hz
Suction pump with motor 0.22 kW F IP 55 | 1x230V, 50 / 60Hz Special design: 1 ~ alternating current 2-pole KK item 3 Capacitor 10μF 400VDB mounted Pump in bronze Customs tariff number: 8413 70 59
Brinkmann - SB25-65BZX+435

Suction pump with motor 0.22 kW F IP 55 | 1x230V, 50 / 60Hz Special design: 1 ~ alternating current 2-pole KK item 3 Capacitor 10μF 400VDB mounted Pump in bronze Customs tariff number: 8413 70 59
suction line Match code: 0122N0010C5U1100BP200K0025S suction lines Product: suction line Execution: rigid, non-return valve, level monitoring, protective tube Ø40 Nominal width: DN10 (200 l/h) Material: PVC Suction connection: threaded pin G3/4 outside Suction line length: 1100 mm Gasket material: FPM + EPDM (both included) Level monitoring: PP float Number of switching points: 2 Material hose: without suction hose Hose length: - Tank connection: with screw cap K60x6 Special version: without Electrical connection: free cable ends without plug free cable length: approx. 2.5 m Switching function: normally open when the level rises Electrical load capacity of the float switch Switching voltage: max. < 50 V DC; < 50VAC Switching current: max. 1 A Switching capacity: max. 20 VA (contact protection relay for inductive loads)
Lutz-Jesco - SDL-2 DN10 PVC L=1100

suction line Match code: 0122N0010C5U1100BP200K0025S suction lines Product: suction line Execution: rigid, non-return valve, level monitoring, protective tube Ø40 Nominal width: DN10 (200 l/h) Material: PVC Suction connection: threaded pin G3/4 outside Suction line length: 1100 mm Gasket material: FPM + EPDM (both included) Level monitoring: PP float Number of switching points: 2 Material hose: without suction hose Hose length: - Tank connection: with screw cap K60x6 Special version: without Electrical connection: free cable ends without plug free cable length: approx. 2.5 m Switching function: normally open when the level rises Electrical load capacity of the float switch Switching voltage: max. < 50 V DC; < 50VAC Switching current: max. 1 A Switching capacity: max. 20 VA (contact protection relay for inductive loads)
Suction Line 0122N0010C5U1100BP200K0025S Suction lines Poduct: Suction line Version: Rigid, non-return valve, level control, protection pipe Ø40 Nominal width: DN10 (200 l/h) Material: PVC Suction connection: Threaded spigot G3/4 M Suction line length: 1100 mm Gasket material: FPM + EPDM (both added) Level control: PP float Number of switching points: 2 Material hose: without suction hose Hose length: - Tank connection: with screwing cap K60x6 Special design: without Electrical connection: free cable ends without plug free cable length: approx. 2.5 m Switching function: Contact on rising level Switching voltage: max. < 50 V DC; < 50 V AC Switching current: max. 1 A Switching power: max. 20 VA (protective contact relays at inductive loads)
Lutz-Jesco - SDL-2 DN10 PVC L=1100

Suction Line 0122N0010C5U1100BP200K0025S Suction lines Poduct: Suction line Version: Rigid, non-return valve, level control, protection pipe Ø40 Nominal width: DN10 (200 l/h) Material: PVC Suction connection: Threaded spigot G3/4 M Suction line length: 1100 mm Gasket material: FPM + EPDM (both added) Level control: PP float Number of switching points: 2 Material hose: without suction hose Hose length: - Tank connection: with screwing cap K60x6 Special design: without Electrical connection: free cable ends without plug free cable length: approx. 2.5 m Switching function: Contact on rising level Switching voltage: max. < 50 V DC; < 50 V AC Switching current: max. 1 A Switching power: max. 20 VA (protective contact relays at inductive loads)
Submersible slurp pump with motor 2.6 kW F IP 55 IE3 220-240 / 380-415V, 50Hz
Brinkmann - SGL801/320 +001

Submersible slurp pump with motor 2.6 kW F IP 55 IE3 220-240 / 380-415V, 50Hz
Submersible slurp pump with motor 2.6 kW F IP 55 IE3 220-240 / 380-415V, 50Hz Customs tariff number: 8413 70 59
Brinkmann - SGL801/570+001

Submersible slurp pump with motor 2.6 kW F IP 55 IE3 220-240 / 380-415V, 50Hz Customs tariff number: 8413 70 59
Submersible slurp pump with motor 2.2 kW F IP 55 IE3 220-240 / 380-415V, 50Hz prepared for interchangeable flange Special design: Motor connector 10-pin only motor part
Brinkmann - SGL781/450 -MV+700

Submersible slurp pump with motor 2.2 kW F IP 55 IE3 220-240 / 380-415V, 50Hz prepared for interchangeable flange Special design: Motor connector 10-pin only motor part