Unit for testing the DC- component, tripping current
TRMS-Multimeter, insulation (50V...1000V)
TRMS multimeter: 4 1/2, Data Storage, GH, KS17-2, batter
TRMS multimeter digital triple display, 310000 Digit,
THERMCPL/GEN PURPOSE SCAN CARD
The test system should be able to output at 50Hz frequency and have a power of 60kV 1A 50-60 KVA. The test system must be PD-Free to allow partial discharge measurement. The test system should contain 50kV-60kV 1nF coupling capacitor for partial discharge measurement. The test system should contain a 50kV-60kV 100pF SF6 isolated reference capacitor for tandelta measurement. The test system must have a PLC control unit with a touch panel. The test system should have a security system that will give an audible and light warning during the test. The test system should have 99 programmable interfaces and memories for different test parameters. The test system should have a resolution of 0.01kV. Test system Vmax. It should have a voltage rise rate of 2.06 kV/s. The test system should be able to work at a temperature of -10 +35 degrees. The test system should have an emergency stop button to cut off the power in an emergency.
THD 6.5 DIGITAL MULTIMETER @ 220V
Tester Hybrid &E-CAR incl. Case HC30, METRAHIT tester, charger
Tester Hybrid & E-CARs, METRAHIT tester, charger
Tester Hybrid & E-CARs METRAHIT tester, charger
Tester Hybrid & E-CAR Set, tester, charger NA HIT27
Tester for fault-current operated protective devices
