Kategoriler
Temperature and humidity transmitter ATTENTION: Parameterization only possible with the LCC-S software The sensor probe is firmly attached to the housing. polycarbonate probe, Sensor length: 100 mm Humidity: 5...95% r.h. Temperature: -20...+80 °C More functions: Absolute humidity, dew point, enthalpy which also as an analog output signal can be used. Power supply: 24 VDC/AC 2 x analogue outputs: 4...20 mA or 0...10 V 2 relay outputs / changeover contact (3A / 230V) Housing/protection class: ABS, IP 65 Art.-No.: 56-2564
Kimo - TH210-BNSP-R without display

Temperature and humidity transmitter ATTENTION: Parameterization only possible with the LCC-S software The sensor probe is firmly attached to the housing. polycarbonate probe, Sensor length: 100 mm Humidity: 5...95% r.h. Temperature: -20...+80 °C More functions: Absolute humidity, dew point, enthalpy which also as an analog output signal can be used. Power supply: 24 VDC/AC 2 x analogue outputs: 4...20 mA or 0...10 V 2 relay outputs / changeover contact (3A / 230V) Housing/protection class: ABS, IP 65 Art.-No.: 56-2564
sound transmitter incl. microphone SLT-TRM; Power supply: 90 ... 260 V AC
Lutron - PCE-SLT-TRM

sound transmitter incl. microphone SLT-TRM; Power supply: 90 ... 260 V AC
Replaceable differential pressure module including temperature input for C310 transmitter Art.-Nr.: 56-24414 The module has a separate temperature input (type K) (Temperature compensation possible) No zero point drift thanks to automatic zero point adjustment, that ensures good long-term stability. Measuring ranges: Pressure: +/- 100 Pa (other measuring ranges available) Resolution: 1 Pa High resolution option with 0.1 Pa Type: HRP Accuracy: ± 0.2% Temperature: -200 ... 1300°C (depending on the probe)
Kimo - SPI2-100

Replaceable differential pressure module including temperature input for C310 transmitter Art.-Nr.: 56-24414 The module has a separate temperature input (type K) (Temperature compensation possible) No zero point drift thanks to automatic zero point adjustment, that ensures good long-term stability. Measuring ranges: Pressure: +/- 100 Pa (other measuring ranges available) Resolution: 1 Pa High resolution option with 0.1 Pa Type: HRP Accuracy: ± 0.2% Temperature: -200 ... 1300°C (depending on the probe)
Range: -20...+60°C;10-100% REL. HUMIDITY REGISTRATION TIME: 1 AND 7 DAYS DIVISION: 5% REL. MOISTURE; 1 DEGREE C WRITING WIDTH: 2 x 82 mm MOVEMENT: HAND WINDING DRUM MOVEMENT MEASURING ELEMENT: "H" F. REL. HUMIDITY BIMETAL F. TEMP. -REGISTRATION IS DONE BY FIBER PENS. Scope of supply: 205088 STRIP 620/640/7/H Range: -20...+60°C,0-100% r.h. 1 SET = 100 SHEET
Thies Clima - 1.0660.00.005 HYGRO-THERMOGRAPH

Range: -20...+60°C;10-100% REL. HUMIDITY REGISTRATION TIME: 1 AND 7 DAYS DIVISION: 5% REL. MOISTURE; 1 DEGREE C WRITING WIDTH: 2 x 82 mm MOVEMENT: HAND WINDING DRUM MOVEMENT MEASURING ELEMENT: "H" F. REL. HUMIDITY BIMETAL F. TEMP. -REGISTRATION IS DONE BY FIBER PENS. Scope of supply: 205088 STRIP 620/640/7/H Range: -20...+60°C,0-100% r.h. 1 SET = 100 SHEET
R.O.B. 75
Daeyang Electric - GLOBE COMMENTS: BUYER PART : 8800000003359

R.O.B. 75

R.O.B. 25
Daeyang Electric - GLOBE COMMENTS: BUYER PART : 8800000002359

R.O.B. 25

PRECIPITATION MONITOR DEVICE SERVES AS A SIGNAL DETERMINATION OF THE START AND END OF PRECIPITATION, AS WELL AS CONTROL OF e.g. MEASURING OR SAFETY DEVICES. MEASURING SYSTEM: SENSOR AREA WITH IR LIGHT BARRIER SYSTEM MEASUREMENT: PRECIPITATION YES/NO OUTPUT: CHANGE SWITCH CONTACT LOAD. : 230V AC / 4A SWITCH-ON CONDITION: 1 ... 15 EVENTS (ADJUSTABLE) IN 50 SECONDS (FACTORY SETTING: 12 EVENTS/25 sec) TURN OFF: 25 ... 375 SEC. ADJUSTABLE OPERATING VOLTAGE: 24 V AC/DC; APPROX.1.0A CONNECTION: CLAMPS PROTECTION TYPE: IP 65 WEIGHT: 0.4KG
Thies Clima - 5.4103.10.000

PRECIPITATION MONITOR DEVICE SERVES AS A SIGNAL DETERMINATION OF THE START AND END OF PRECIPITATION, AS WELL AS CONTROL OF e.g. MEASURING OR SAFETY DEVICES. MEASURING SYSTEM: SENSOR AREA WITH IR LIGHT BARRIER SYSTEM MEASUREMENT: PRECIPITATION YES/NO OUTPUT: CHANGE SWITCH CONTACT LOAD. : 230V AC / 4A SWITCH-ON CONDITION: 1 ... 15 EVENTS (ADJUSTABLE) IN 50 SECONDS (FACTORY SETTING: 12 EVENTS/25 sec) TURN OFF: 25 ... 375 SEC. ADJUSTABLE OPERATING VOLTAGE: 24 V AC/DC; APPROX.1.0A CONNECTION: CLAMPS PROTECTION TYPE: IP 65 WEIGHT: 0.4KG
Power/Voltage: 24V-60W Power : 220/24V
Daeyang Electric - DDS-84A

Power/Voltage: 24V-60W Power : 220/24V
Pitot tube, stainless steel To measure: pressure, air velocity, volume flow, temperature heat-resistant up to +600°C (optional up to 1000°C) with integrated Thermocouple for simultaneous Temperature measurement (compensation) type K Diameter: 6 mm / NL: 800 mm Delivery incl. 1.5 m cable for thermocouple (suitable hose 5mm inside)
Kimo - TPL-06-800-T

Pitot tube, stainless steel To measure: pressure, air velocity, volume flow, temperature heat-resistant up to +600°C (optional up to 1000°C) with integrated Thermocouple for simultaneous Temperature measurement (compensation) type K Diameter: 6 mm / NL: 800 mm Delivery incl. 1.5 m cable for thermocouple (suitable hose 5mm inside)
Only sensor cable N95606
Benetech - GM100

Only sensor cable N95606
Multifunction transmitter Art.-Nr.: 56-24410 which adapts to your measurement requirements. Optional are several measurements simultaneously with the correspond to probes and modules such as e.g. differential pressure, air velocity, volume flow, rel. Humidity, dew point, temperature, CO2, CO and ( barometric air pressure ) possible. Likewise, the pressure signal with the SQR/3 function (optional) the air speed, the flow rate is shown on the display and as analogue signal can be further processed. Technical specifications: Voltage supply: 24 V AC / DC Analog outputs: 2 x 0/4-20 mA or 2 x 0/5-10V ( Optional: 4 x 0/4-20 mA or 4 x 0/5-10V ) Relay outputs: 4 x changeover contacts 5A / 230V (optional) interchangeable Pressure modules including temperature input ( +/- 100Pa, 500Pa, 1000Pa, 10,000Pa optional ) Optional: Interface for RS485 Modbus-RTU protocol and Ethernet networks. Please note when ordering the Ethernet interface cannot be retrofitted. Housing: IP 65 ABS housing with stainless steel front incl. 4 x 2 colored LEDs and acoustic alarm Operating temperature: -10..to + 50°C All transmitter settings can be carried out using the keypad on the device or (optionally) via the parameterization software LCC-S quickly and easily from your laptop. Delivery: with wall bracket and adjustment certificate
Kimo - C 310-BO mit Display

Multifunction transmitter Art.-Nr.: 56-24410 which adapts to your measurement requirements. Optional are several measurements simultaneously with the correspond to probes and modules such as e.g. differential pressure, air velocity, volume flow, rel. Humidity, dew point, temperature, CO2, CO and ( barometric air pressure ) possible. Likewise, the pressure signal with the SQR/3 function (optional) the air speed, the flow rate is shown on the display and as analogue signal can be further processed. Technical specifications: Voltage supply: 24 V AC / DC Analog outputs: 2 x 0/4-20 mA or 2 x 0/5-10V ( Optional: 4 x 0/4-20 mA or 4 x 0/5-10V ) Relay outputs: 4 x changeover contacts 5A / 230V (optional) interchangeable Pressure modules including temperature input ( +/- 100Pa, 500Pa, 1000Pa, 10,000Pa optional ) Optional: Interface for RS485 Modbus-RTU protocol and Ethernet networks. Please note when ordering the Ethernet interface cannot be retrofitted. Housing: IP 65 ABS housing with stainless steel front incl. 4 x 2 colored LEDs and acoustic alarm Operating temperature: -10..to + 50°C All transmitter settings can be carried out using the keypad on the device or (optionally) via the parameterization software LCC-S quickly and easily from your laptop. Delivery: with wall bracket and adjustment certificate
Model: TH210-BODI/150-R with display remote stainless steel probe, Sensor length: 150mm / diameter 13mm Cable length 1.9 m (other lengths available) ( Optional sensor mounting clamps Duct Mount: BF13 or BFP-13 Wall mount: RBE-13 ) Humidity: 5...95% RH Temperature: -40...+180 °C More functions: Absolute humidity, dew point, enthalpy which is also available as an analog output signal can be used. Supply: 24 VDC/AC 2 x analogue outputs: 4...20 mA or 0...10 V 2 relay outputs / changeover (3A / 230V) Housing/degree of protection: ABS, IP 65
Kimo - Temperature and humidity transmitter

Model: TH210-BODI/150-R with display remote stainless steel probe, Sensor length: 150mm / diameter 13mm Cable length 1.9 m (other lengths available) ( Optional sensor mounting clamps Duct Mount: BF13 or BFP-13 Wall mount: RBE-13 ) Humidity: 5...95% RH Temperature: -40...+180 °C More functions: Absolute humidity, dew point, enthalpy which is also available as an analog output signal can be used. Supply: 24 VDC/AC 2 x analogue outputs: 4...20 mA or 0...10 V 2 relay outputs / changeover (3A / 230V) Housing/degree of protection: ABS, IP 65