Kategoriler
Multifunction transmitter Art.-Nr.: 56-24410 which adapts to your measurement requirements. Optional are several measurements simultaneously with the correspond to probes and modules such as e.g. differential pressure, air velocity, volume flow, rel. Humidity, dew point, temperature, CO2, CO and ( barometric air pressure ) possible. Likewise, the pressure signal with the SQR/3 function (optional) the air speed, the flow rate is shown on the display and as analogue signal can be further processed. Technical specifications: Voltage supply: 24 V AC / DC Analog outputs: 2 x 0/4-20 mA or 2 x 0/5-10V ( Optional: 4 x 0/4-20 mA or 4 x 0/5-10V ) Relay outputs: 4 x changeover contacts 5A / 230V (optional) interchangeable Pressure modules including temperature input ( +/- 100Pa, 500Pa, 1000Pa, 10,000Pa optional ) Optional: Interface for RS485 Modbus-RTU protocol and Ethernet networks. Please note when ordering the Ethernet interface cannot be retrofitted. Housing: IP 65 ABS housing with stainless steel front incl. 4 x 2 colored LEDs and acoustic alarm Operating temperature: -10..to + 50°C All transmitter settings can be carried out using the keypad on the device or (optionally) via the parameterization software LCC-S quickly and easily from your laptop. Delivery: with wall bracket and adjustment certificate
Kimo - C 310-BO mit Display

Multifunction transmitter Art.-Nr.: 56-24410 which adapts to your measurement requirements. Optional are several measurements simultaneously with the correspond to probes and modules such as e.g. differential pressure, air velocity, volume flow, rel. Humidity, dew point, temperature, CO2, CO and ( barometric air pressure ) possible. Likewise, the pressure signal with the SQR/3 function (optional) the air speed, the flow rate is shown on the display and as analogue signal can be further processed. Technical specifications: Voltage supply: 24 V AC / DC Analog outputs: 2 x 0/4-20 mA or 2 x 0/5-10V ( Optional: 4 x 0/4-20 mA or 4 x 0/5-10V ) Relay outputs: 4 x changeover contacts 5A / 230V (optional) interchangeable Pressure modules including temperature input ( +/- 100Pa, 500Pa, 1000Pa, 10,000Pa optional ) Optional: Interface for RS485 Modbus-RTU protocol and Ethernet networks. Please note when ordering the Ethernet interface cannot be retrofitted. Housing: IP 65 ABS housing with stainless steel front incl. 4 x 2 colored LEDs and acoustic alarm Operating temperature: -10..to + 50°C All transmitter settings can be carried out using the keypad on the device or (optionally) via the parameterization software LCC-S quickly and easily from your laptop. Delivery: with wall bracket and adjustment certificate
Model: TH210-BODI/150-R with display remote stainless steel probe, Sensor length: 150mm / diameter 13mm Cable length 1.9 m (other lengths available) ( Optional sensor mounting clamps Duct Mount: BF13 or BFP-13 Wall mount: RBE-13 ) Humidity: 5...95% RH Temperature: -40...+180 °C More functions: Absolute humidity, dew point, enthalpy which is also available as an analog output signal can be used. Supply: 24 VDC/AC 2 x analogue outputs: 4...20 mA or 0...10 V 2 relay outputs / changeover (3A / 230V) Housing/degree of protection: ABS, IP 65
Kimo - Temperature and humidity transmitter

Model: TH210-BODI/150-R with display remote stainless steel probe, Sensor length: 150mm / diameter 13mm Cable length 1.9 m (other lengths available) ( Optional sensor mounting clamps Duct Mount: BF13 or BFP-13 Wall mount: RBE-13 ) Humidity: 5...95% RH Temperature: -40...+180 °C More functions: Absolute humidity, dew point, enthalpy which is also available as an analog output signal can be used. Supply: 24 VDC/AC 2 x analogue outputs: 4...20 mA or 0...10 V 2 relay outputs / changeover (3A / 230V) Housing/degree of protection: ABS, IP 65
MAIN TRANSFER BR 4 ZONE GRX-4100
Lutron - Grx-4104-T-Br

MAIN TRANSFER BR 4 ZONE GRX-4100
m CABLE 8x0.5mm² LIYCY BLACK UV RESISTANT, OUTSIDE Ø 7.6 +-0.20
Thies Clima - 212576

m CABLE 8x0.5mm² LIYCY BLACK UV RESISTANT, OUTSIDE Ø 7.6 +-0.20
m CABLE 8x0.5mm² LIYCY BLACK UV RESISTANT, OUTSIDE Ø 7.6 +-0.20
Thies Clima - 212576 (optional))

m CABLE 8x0.5mm² LIYCY BLACK UV RESISTANT, OUTSIDE Ø 7.6 +-0.20
m CABLE 5X0.5MM² LI9YC11Y BLACK UV- HALOGEN- SEAWATER- EST. Ø6.4
Thies Clima - 212695

m CABLE 5X0.5MM² LI9YC11Y BLACK UV- HALOGEN- SEAWATER- EST. Ø6.4
Lutron LCR-9184 is a digital LCR meter with dual LCD display. 19999 / 1999 counts. Features: Five different test frequency are available 100 Hz/120 Hz/1 KHz/10 KHz/100 KHz. Ls/Lp/Cs/Cp/Rs/Rp with D/Q/ /ESR parameters. Sorting function. Range: L: 20 H-2000H C: 20pF-20mF R:20Ω - 200MΩ Basic accuracy 0,5%.
Lutron - LCR meter LUTRON LCR-9184

Lutron LCR-9184 is a digital LCR meter with dual LCD display. 19999 / 1999 counts. Features: Five different test frequency are available 100 Hz/120 Hz/1 KHz/10 KHz/100 KHz. Ls/Lp/Cs/Cp/Rs/Rp with D/Q/ /ESR parameters. Sorting function. Range: L: 20 H-2000H C: 20pF-20mF R:20Ω - 200MΩ Basic accuracy 0,5%.
KIMO pressure calibrator for mobile calibration of pressure sensors Pressure range: -2500 ... +2500 Pa with pressure sensor for pos. and negative pressure Very high accuracy with PC interface and evaluation software Included in the delivery are... - 2 x 1m silicone hose - Cable for power supply - USB cable and evaluation software - Operating instructions (English) - Calibration certificate Item No.: 56-24485
Kimo - GP 500-1

KIMO pressure calibrator for mobile calibration of pressure sensors Pressure range: -2500 ... +2500 Pa with pressure sensor for pos. and negative pressure Very high accuracy with PC interface and evaluation software Included in the delivery are... - 2 x 1m silicone hose - Cable for power supply - USB cable and evaluation software - Operating instructions (English) - Calibration certificate Item No.: 56-24485
interchangeable humidity probe for class 310 Stainless steel probe with stainless steel filter for relative humidity and Temperature. Suitable for all KIMO transmitters of the class 310 Measuring range: 5 ... 95%RH and -40 ... +180°C Cable: white silicone cable, 2 m length Measuring probe: Ø 13 mm, 300 mm length different filter caps available (optional) delivered with adjustment certificate Calibration certificate (optional)
Kimo - SHDI-300

interchangeable humidity probe for class 310 Stainless steel probe with stainless steel filter for relative humidity and Temperature. Suitable for all KIMO transmitters of the class 310 Measuring range: 5 ... 95%RH and -40 ... +180°C Cable: white silicone cable, 2 m length Measuring probe: Ø 13 mm, 300 mm length different filter caps available (optional) delivered with adjustment certificate Calibration certificate (optional)
including I2 option 11/15 kW, 110-500 V, 26/40 A, - / B Soft starter and stop device with adjustable voltage ramp Art.-No .: 8083.321 / 27
Kimo - LEKTROMIK 11S2-27

including I2 option 11/15 kW, 110-500 V, 26/40 A, - / B Soft starter and stop device with adjustable voltage ramp Art.-No .: 8083.321 / 27
incl. 100 mm vane probe Type: VT 210 L - set / graphic display up to 6 measurements simultaneously 2 external probe inputs 1 slot for modules Outputs for PC and IR printer radio probe option automatic probe detection Features: air velocity, volume flow, Measuring funnel function, temperature, humidity, speed, climate module Log function (1000 data records with 20,000 measurement points) Included: VT210 - Anemometer / Thermo-Hygrometer Vane probe SH-100 ( 100 mm diameter ) Air speed: 0.3....35 m/s Flow rate: 0...99999 m³/h Temperature: -20...+80 °C Handle with multifunction control button - CSM probe cable - Li-Ion battery block (up to 40 hours continuous operation) - USB adapter cable and power supply - Transport case - Calibration certificate Weight: about 500g
Kimo - Anemometer / Thermo-Hygrometer

incl. 100 mm vane probe Type: VT 210 L - set / graphic display up to 6 measurements simultaneously 2 external probe inputs 1 slot for modules Outputs for PC and IR printer radio probe option automatic probe detection Features: air velocity, volume flow, Measuring funnel function, temperature, humidity, speed, climate module Log function (1000 data records with 20,000 measurement points) Included: VT210 - Anemometer / Thermo-Hygrometer Vane probe SH-100 ( 100 mm diameter ) Air speed: 0.3....35 m/s Flow rate: 0...99999 m³/h Temperature: -20...+80 °C Handle with multifunction control button - CSM probe cable - Li-Ion battery block (up to 40 hours continuous operation) - USB adapter cable and power supply - Transport case - Calibration certificate Weight: about 500g
INTERFACE CONVERTER RS 422/RS 232 - PC FD
Thies Clima - 9.1702.30.000

INTERFACE CONVERTER RS 422/RS 232 - PC FD