Kategoriler
Schubert&Salzer - 8231/080-Ss-O2-Nc
Schubert&Salzer - 8231/050-Cs-Ng-Nc
Type 7010: Angle seat valve Nominal diameter: DN 25 Type: inclined seat Connection: Whitworth pipe thread Housing material: gunmetal Seat seal: EPDM Control function: Spring closes (closing against media flow) Drive: piston Ø80mm
Schubert&Salzer - 7010/025v101221

Type 7010: Angle seat valve Nominal diameter: DN 25 Type: inclined seat Connection: Whitworth pipe thread Housing material: gunmetal Seat seal: EPDM Control function: Spring closes (closing against media flow) Drive: piston Ø80mm
R1 / 2, PN40, max.32bar / 239C level probe EL = 900mm total weight: 1.41 kg
Spirax Sarco - LP20

R1 / 2, PN40, max.32bar / 239C level probe EL = 900mm total weight: 1.41 kg
Level electrode (4 times), max. 239 C, 32 bar Total weight: 1.60 kg
Spirax Sarco - Lp10-4, R1pn40

Level electrode (4 times), max. 239 C, 32 bar Total weight: 1.60 kg
Ident number 2801373 Customs fee number. 8481 8099 Type 4040: ball sector valve Nominal diameter: DN 50 (Kvs 94; Cv 109) Article: Valve Design: Intermediate flange design for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN80 and DN100: PN25, DN150-DN250: PN16, DN300: PN16 in flange design) Housing Material: Stainless steel 1.4408 or 1.4404 Seat combination: seat ring: stellite; Ball sector: Stainless steel, hard chrome plated and lapped, hard chrome plated retaining ring Sealing combination: all seals (part 13-16) made of VITON, Media temperature: -15 ° C to + 200 ° C Drive: Pneumatic rotary actuator (Air Torque) with mounting kit according to DIN / ISO 5211 Safety position: single acting, spring closes
Schubert&Salzer - 4040/050v11c1t1

Ident number 2801373 Customs fee number. 8481 8099 Type 4040: ball sector valve Nominal diameter: DN 50 (Kvs 94; Cv 109) Article: Valve Design: Intermediate flange design for flanges DIN EN 1092-1 (DN25-DN50: PN40, DN80 and DN100: PN25, DN150-DN250: PN16, DN300: PN16 in flange design) Housing Material: Stainless steel 1.4408 or 1.4404 Seat combination: seat ring: stellite; Ball sector: Stainless steel, hard chrome plated and lapped, hard chrome plated retaining ring Sealing combination: all seals (part 13-16) made of VITON, Media temperature: -15 ° C to + 200 ° C Drive: Pneumatic rotary actuator (Air Torque) with mounting kit according to DIN / ISO 5211 Safety position: single acting, spring closes
Ball float steam trap FT44H-4.5C with separate vent and adjustable bypass flange connection DN25, pressure level PN40 made of cast steel GS-C25, inner parts stainless steel installation position horizontal, differential pressure 4.5bar total weight: 60.00 kg FT47 replaced by FT44
Spirax Sarco - Ft44h-4,5c (Ft47 Replaced By Ft44)

Ball float steam trap FT44H-4.5C with separate vent and adjustable bypass flange connection DN25, pressure level PN40 made of cast steel GS-C25, inner parts stainless steel installation position horizontal, differential pressure 4.5bar total weight: 60.00 kg FT47 replaced by FT44
as a spare part for Pressure reducing valve HM-RP Pressure range 2-23 barü
Brunnbauer - Piloptventil Rp2m

as a spare part for Pressure reducing valve HM-RP Pressure range 2-23 barü
5030265000 LC2650 level controller 230 VAC 3-P.-S. od. 4-20mA, 485 / Modbus total weight: 0.55 kg ****LC2610 not available / LC2650 successor to LC2610****
Spirax Sarco - Lc2650

5030265000 LC2650 level controller 230 VAC 3-P.-S. od. 4-20mA, 485 / Modbus total weight: 0.55 kg ****LC2610 not available / LC2650 successor to LC2610****
Brunnbauer
Mls-Lanny - 0140281
PA20 head amplifier (volt) for capacitive level probe LP 20 total weight: 0.50 kg Country of origin: GB Commodity tariff no .: 9032.90.00
Spirax Sarco - Pa20

PA20 head amplifier (volt) for capacitive level probe LP 20 total weight: 0.50 kg Country of origin: GB Commodity tariff no .: 9032.90.00