Kategoriler
Order no. 7081500 GESTRA RHOMBUSline Thermal steam trap suitable between flanges EN 1092, form B1 Materials: Housing, hood: 1.0460 / ASTM A105 Internal parts: stainless steel DN 25
Gestra - BK 45 PN 40

Order no. 7081500 GESTRA RHOMBUSline Thermal steam trap suitable between flanges EN 1092, form B1 Materials: Housing, hood: 1.0460 / ASTM A105 Internal parts: stainless steel DN 25
Order No. 2661644 Blowdown controller type KS 90-1 Degree of protection: front IP 65 Housing IP 20 Display: 4-digit. Actual and setpoint display 4 LED yellow for status display for alarm 1,2 and valve open, too Input 1: standard signal 0 / 4-20 mA Output: 4 relays as potential-free change-over contacts configured: as a three-step controller and 1 each Max alarm and Min alarm Power supply: 90 to 250 V, AC 24 V, AC optional
Gestra - 01503210

Order No. 2661644 Blowdown controller type KS 90-1 Degree of protection: front IP 65 Housing IP 20 Display: 4-digit. Actual and setpoint display 4 LED yellow for status display for alarm 1,2 and valve open, too Input 1: standard signal 0 / 4-20 mA Output: 4 relays as potential-free change-over contacts configured: as a three-step controller and 1 each Max alarm and Min alarm Power supply: 90 to 250 V, AC 24 V, AC optional
Order no. 0531260 GESTRA level electrode conductive with Pt-1000 for installation in condensate drains of the series Rhombus line System VKE NRG 16-28 PN 40 Steam penetration and condensate build-up detectable material Housing: 1.4571 connection mechanical: external thread M24 x 1.5 electrical: M12 sensor plug, 5-pin, A-coded Installation length: 45 mm Mission data Pressure: max 32 bar Temperature: max 238 ° C Electrode voltage: 12V Degree of protection: IP65 according to DIN EN 60529
Gestra - VKE NRG 16-28 PN 40 (Alternative for pos7)

Order no. 0531260 GESTRA level electrode conductive with Pt-1000 for installation in condensate drains of the series Rhombus line System VKE NRG 16-28 PN 40 Steam penetration and condensate build-up detectable material Housing: 1.4571 connection mechanical: external thread M24 x 1.5 electrical: M12 sensor plug, 5-pin, A-coded Installation length: 45 mm Mission data Pressure: max 32 bar Temperature: max 238 ° C Electrode voltage: 12V Degree of protection: IP65 according to DIN EN 60529
Order no. 0431098 SO GESTRA test station for permanent Condensate monitoring Monitoring for steam loss and Condensate build-up Housing design for wall mounting Supply voltage 230 VAC 16 inputs for measuring electrodes with built-in Temperature sensor PT 1000 or optionally for measuring electrodes without temperature sensor 1 input for temperature sensor PT 100 for measuring the system temperature 1 output collective alarm Display via 3-digit 7-segment display as well as 3 status LEDs Control button on the front 7 different operating modes for Processing of measured values - Condensate accumulation monitoring optionally by Temperature sensor or instantaneous by measuring electrode - suitable for all condensate drain systems, manufacturer-independent - automatic limit value setting - Limit values can be set individually - automatic operational detection to avoid it of false alarms when starting and stopping - alarm history
Gestra - NRA 1-3a Multi-T

Order no. 0431098 SO GESTRA test station for permanent Condensate monitoring Monitoring for steam loss and Condensate build-up Housing design for wall mounting Supply voltage 230 VAC 16 inputs for measuring electrodes with built-in Temperature sensor PT 1000 or optionally for measuring electrodes without temperature sensor 1 input for temperature sensor PT 100 for measuring the system temperature 1 output collective alarm Display via 3-digit 7-segment display as well as 3 status LEDs Control button on the front 7 different operating modes for Processing of measured values - Condensate accumulation monitoring optionally by Temperature sensor or instantaneous by measuring electrode - suitable for all condensate drain systems, manufacturer-independent - automatic limit value setting - Limit values can be set individually - automatic operational detection to avoid it of false alarms when starting and stopping - alarm history
Order No .: 82315100363 Float steam trap GESTRA UNA 45hl DN 25 PN 16 Final organ (AO): 13 duplex Connection type: flange EN 1092 PN 16 Housing: 1.0460 / SA105 Hood: 5.3103 (A395) Internal parts: stainless steel Equipped with: - Visible hood with lifting device **** Please check the offered conclusion organ AO13 **** **** other possibilities are: AO2 or AO4 or AO8 ****
Gestra - Gestra Una 45hl

Order No .: 82315100363 Float steam trap GESTRA UNA 45hl DN 25 PN 16 Final organ (AO): 13 duplex Connection type: flange EN 1092 PN 16 Housing: 1.0460 / SA105 Hood: 5.3103 (A395) Internal parts: stainless steel Equipped with: - Visible hood with lifting device **** Please check the offered conclusion organ AO13 **** **** other possibilities are: AO2 or AO4 or AO8 ****
M-RSE32HV6T0WX_/OP;Z2 2-WAY ACTIVE CARTRIDGE VALVE MONITORED Total weight: 10.5kg Product number: 84812010 Country of origin :: LU
Moog - Art Nr. Xsb10362-006m01

M-RSE32HV6T0WX_/OP;Z2 2-WAY ACTIVE CARTRIDGE VALVE MONITORED Total weight: 10.5kg Product number: 84812010 Country of origin :: LU
MPA 46 GESTRA blowdown valve with membrane drive Separate sealing preload Wear protection by downstream integrated radial stage nozzle Control bore in the closing spring protection tube for leakage monitoring materials: Housing: 1.0460 / A105 Gland fitting: 1.0460 / A105 Closing screw: 1.7225 / A193-B7 Sealing ring: 1.4301 Seat bushing (hardened): 1.4034 Cone (hardened): 1.4122 Connection: Flange PN 40 B1 DN 40
Gestra - Mpa 46

MPA 46 GESTRA blowdown valve with membrane drive Separate sealing preload Wear protection by downstream integrated radial stage nozzle Control bore in the closing spring protection tube for leakage monitoring materials: Housing: 1.0460 / A105 Gland fitting: 1.0460 / A105 Closing screw: 1.7225 / A193-B7 Sealing ring: 1.4301 Seat bushing (hardened): 1.4034 Cone (hardened): 1.4122 Connection: Flange PN 40 B1 DN 40
MK 45/2 PN 40 GESTRA RHOMBUSline Thermal steam trap Connection: flanges EN 1092, FOrm B1 Materials: Housing, hood: 1.0460 / ASTM A105 Diaphragm: Hastelloy Other internal parts: stainless steel DN 25
Gestra - 7251501

MK 45/2 PN 40 GESTRA RHOMBUSline Thermal steam trap Connection: flanges EN 1092, FOrm B1 Materials: Housing, hood: 1.0460 / ASTM A105 Diaphragm: Hastelloy Other internal parts: stainless steel DN 25
JOA2HAA6VSX
Moog - Moog D661-4651/G35

JOA2HAA6VSX
INTEGRATED PROGRAMMABLE ANNVACIATORS WITH COMMUNICATION CABLE Could you please send price for bellow parts
Toyooki - Ipa-P64a-64ct

INTEGRATED PROGRAMMABLE ANNVACIATORS WITH COMMUNICATION CABLE Could you please send price for bellow parts
GESTRA test station for permanent Condensate monitoring Monitoring for steam loss and Condensate build-up Housing design for panel mounting Supply voltage 230 VAC 16 inputs for measuring electrodes with built-in Temperature sensor PT 1000 or optionally for measuring electrodes without temperature sensor 1 input for temperature sensor PT 100 for measuring the system temperature 1 output collective alarm Display via 3-digit 7-segment display as well as 3 status LEDs Control button on the front 7 different operating modes for Processing of measured values - Condensate accumulation monitoring optionally by Temperature sensor or instantaneous by measuring electrode - suitable for all condensate drain systems, manufacturer-independent - automatic limit value setting - Limit values can be set individually - automatic operational detection to avoid it of false alarms when starting and stopping - alarm history
Gestra - NRA 1-3e (alternative for pos 2)

GESTRA test station for permanent Condensate monitoring Monitoring for steam loss and Condensate build-up Housing design for panel mounting Supply voltage 230 VAC 16 inputs for measuring electrodes with built-in Temperature sensor PT 1000 or optionally for measuring electrodes without temperature sensor 1 input for temperature sensor PT 100 for measuring the system temperature 1 output collective alarm Display via 3-digit 7-segment display as well as 3 status LEDs Control button on the front 7 different operating modes for Processing of measured values - Condensate accumulation monitoring optionally by Temperature sensor or instantaneous by measuring electrode - suitable for all condensate drain systems, manufacturer-independent - automatic limit value setting - Limit values can be set individually - automatic operational detection to avoid it of false alarms when starting and stopping - alarm history
GESTRA test chamber to the GESTRA test device for VKE condensate drain systems. Electrode connection either right or left. For horizontal lines. Materials: Housing: GS-C25 (1.0619) Flanges: C22.8 (1.0460) Electrode: stainless steel Connection: flanges EN 1092 form B1 DN 25
Gestra - VKE 16-1 PN 40 dn25 (Alternative for pos4)

GESTRA test chamber to the GESTRA test device for VKE condensate drain systems. Electrode connection either right or left. For horizontal lines. Materials: Housing: GS-C25 (1.0619) Flanges: C22.8 (1.0460) Electrode: stainless steel Connection: flanges EN 1092 form B1 DN 25