Kategoriler
Flange ISO-16 , for Potable Water
Bermad - BERMAD 4" Pressure Reducing Control Valve

Flange ISO-16 , for Potable Water
Flange ISO-16 , for Potable Water
Bermad - BERMAD 6" Pressure Reducing Control Valve

Flange ISO-16 , for Potable Water
Flange ISO-16 , for Potable Water
Bermad - BERMAD 8" Pressure Reducing Control Valve

Flange ISO-16 , for Potable Water
Flange ISO-16 , for Potable Water
Bermad - BERMAD 10" Pressure Reducing Control Valve

Flange ISO-16 , for Potable Water
Explosion decoupling device with patented compressed air storage and integrated Quick-closing solenoid valve, "fail-safe function" in the event of voltage or Compressed air interruption, power supply and activation by EXKOP control. Nominal width (DN): 200 mm Cuff: food grade Flange standard: DIN EN 1092-1:2013-04, type 11 Pressure stage: PN 10 (EN 1092-1) Flange: aluminum with stainless steel bushing Housing: aluminum Colour: RAL 1015 Max. flow rate: 30 m/s Max. process temperature: 80 °C Heating: no Minimum ambient temperature: 0 °C Max. ambient temperature: 60 °C Installation position: any Protection class: IP 65 Voltage supply: 24 V DC from EXKOP® II control Compressed air supply: 6 bar g Compressed air connection: 8 mm (Festo) Vacuum bypass: no Certification: ATEX 2014/34/EU Test standard: DIN EN 15089:2009 EU Type Examination Certificate: FSA 04 ATEX 1537 X
Rembe - QVII-8 quench valve

Explosion decoupling device with patented compressed air storage and integrated Quick-closing solenoid valve, "fail-safe function" in the event of voltage or Compressed air interruption, power supply and activation by EXKOP control. Nominal width (DN): 200 mm Cuff: food grade Flange standard: DIN EN 1092-1:2013-04, type 11 Pressure stage: PN 10 (EN 1092-1) Flange: aluminum with stainless steel bushing Housing: aluminum Colour: RAL 1015 Max. flow rate: 30 m/s Max. process temperature: 80 °C Heating: no Minimum ambient temperature: 0 °C Max. ambient temperature: 60 °C Installation position: any Protection class: IP 65 Voltage supply: 24 V DC from EXKOP® II control Compressed air supply: 6 bar g Compressed air connection: 8 mm (Festo) Vacuum bypass: no Certification: ATEX 2014/34/EU Test standard: DIN EN 15089:2009 EU Type Examination Certificate: FSA 04 ATEX 1537 X
Ex-Go-Vent Artikel-Nr.: 20900574 One-piece, flat rupture disc for dust and/or gas explosion relief; suitable for processes with little or no overpressure and vacuum Nominal width: 340 mm Nominal length: 385 mm Relief area: 1,300 cm² Type of protection: overpressure Bursting pressure: 0.3 bar g Burst temperature: 80 °C Lower Burst Tolerance: 20% Upper Burst Tolerance: 20% Vacuum resistance: 1,500 mmWS Bursting part: 1.4301 or similar Gasket process side: silicone Gasket FDA Approved: Yes Max. permitted operating temperature: 150 °C Operating Conditions: Non-pulsating process diameter d. Holes: 13mm Number of holes: 16 Outer dimension width: 400 mm Outer dimension length: 445 mm External insulation: insulation cassette Outer Insulation Thickness: 40mm Certification: ATEX 2014/34/EU Test standard: DIN EN 14797:2006 Testing organization: REMBE EU Type Examination Certificate: FSA 04 ATEX 1538 X Customs tariff number: 73269098
Rembe - IKLIEGV-SASL-340x385

Ex-Go-Vent Artikel-Nr.: 20900574 One-piece, flat rupture disc for dust and/or gas explosion relief; suitable for processes with little or no overpressure and vacuum Nominal width: 340 mm Nominal length: 385 mm Relief area: 1,300 cm² Type of protection: overpressure Bursting pressure: 0.3 bar g Burst temperature: 80 °C Lower Burst Tolerance: 20% Upper Burst Tolerance: 20% Vacuum resistance: 1,500 mmWS Bursting part: 1.4301 or similar Gasket process side: silicone Gasket FDA Approved: Yes Max. permitted operating temperature: 150 °C Operating Conditions: Non-pulsating process diameter d. Holes: 13mm Number of holes: 16 Outer dimension width: 400 mm Outer dimension length: 445 mm External insulation: insulation cassette Outer Insulation Thickness: 40mm Certification: ATEX 2014/34/EU Test standard: DIN EN 14797:2006 Testing organization: REMBE EU Type Examination Certificate: FSA 04 ATEX 1538 X Customs tariff number: 73269098
Description Safety valves spring actuated Valve Type : 249-CR-H2 DN in x out : 1” X 1-½” Threaded connections in/out : GAS-M/F Orif. Diam / Orif. Area : 10 mm / 0.78 cm2 Set Pressure : 280 BAR(G) - Is the set pressure that we have supplied this s/n -If you need 300 bar as per your description pls confirm in order- Overpressure : 10% Blowdown : 20% Suitable to discharge 43096 kg/hr of Water @ 35°C Material construction Body Inlet / seat : 1.4418 Body Outlet / bonnet : ASTM A216WCB Cap : ASTM A216WCB Disc : 1.4028 Spindle : 1.4401 Guide : 1.4401 Spring : Alloy steel Note:Fully Interchangeable with s/n 15-9-6 with set pressure 280 bar
Besa - 249-CR-H2

Description Safety valves spring actuated Valve Type : 249-CR-H2 DN in x out : 1” X 1-½” Threaded connections in/out : GAS-M/F Orif. Diam / Orif. Area : 10 mm / 0.78 cm2 Set Pressure : 280 BAR(G) - Is the set pressure that we have supplied this s/n -If you need 300 bar as per your description pls confirm in order- Overpressure : 10% Blowdown : 20% Suitable to discharge 43096 kg/hr of Water @ 35°C Material construction Body Inlet / seat : 1.4418 Body Outlet / bonnet : ASTM A216WCB Cap : ASTM A216WCB Disc : 1.4028 Spindle : 1.4401 Guide : 1.4401 Spring : Alloy steel Note:Fully Interchangeable with s/n 15-9-6 with set pressure 280 bar
copf of sn. 01813 brass CW614N1772
Nuova General Instruments - D10/CS 4 bar

copf of sn. 01813 brass CW614N1772

Compact Performance safety valve, type 462, soft seal, closed bonnet, gas-tight cap H2, for vapours, gases and liquids Technical specification: Order code output, line 1: K7RM33MB1K4XH03K3IP2AJ99X00V55 Order code issue, line 2: V66L44J23MA2H01 Medium: gases gases E-body material : 1.4404/316L 1.4404 / 316L Weighted Connection Entry: (V55) External thread G 3/4" according to DIN ISO 228-1 Threaded outlet: (V66) Internal thread G 1" according to DIN ISO 228-1 Nominal size inlet G 3/4" Nominal size outlet G 1" Pressure stage entry PN 250 Pressure stage outlet PN 100 d0 (ASME-DIN) [mm] 9.0 Response pressure: 50.00 Pressure unit: bar-g Response pressure [bar-g] 50.00 Set pressure in psi-g: 725.19 External back pressure: constant constant external pressure constant external back pressure: 17.00 cdtp calculation based on: differential pressure method/const. Differential pressure method (response pressure minus external back pressure) Cold set pressure [bar-g] 33.00 Cold Set Pressure [psi-g] 478.62 Operating temperature: 50 Temperature unit: °C - Celsius Operating temperature [°C] 50.00 Operating temperature in °F: 122 Plate, metallic / material: (L44) made of material 1.4404/ 316L Plate, soft sealing: (J23) with soft seal FKM "L"(Viton, Fluorel, Technoflon) Sealing ring material: (MB1) Sealing ring made of graphite/1.4401 Pressure screw material: (K7R) Pressure screw material: 1.4104 Spring cap material: (J99) Spring cap material 1.0619/ WCB/ WCC Spring material (X00) standard material Color scheme: (P2A) 1-layer coating system in RAL 5005 according to LID 1608.03 Decrease: (M33) Proof of testing the set pressure (TRB 513 4.2, TRD 504 3.3.4): EN 10204-3.2 (TÜV-Nord) Material quality verification for: (H01) Housing – Position 1 with material quality certificate 3.1 according to DIN EN 10204 Documentation: (H03) LESER CGA Certificate for Global Application Inspection certificate 3.1 according to DIN EN10204 TAG No., valve 1: PSV101 TAG no., valve 2: ??? Type and position of the TAG No.: (M25) Labeling with tag (foil / paper) Discharge coefficient D/G: 0.83 Coefficient of discharge F: 0.61 General information Attachment: design calculation
Leser - 4622.3772

Compact Performance safety valve, type 462, soft seal, closed bonnet, gas-tight cap H2, for vapours, gases and liquids Technical specification: Order code output, line 1: K7RM33MB1K4XH03K3IP2AJ99X00V55 Order code issue, line 2: V66L44J23MA2H01 Medium: gases gases E-body material : 1.4404/316L 1.4404 / 316L Weighted Connection Entry: (V55) External thread G 3/4" according to DIN ISO 228-1 Threaded outlet: (V66) Internal thread G 1" according to DIN ISO 228-1 Nominal size inlet G 3/4" Nominal size outlet G 1" Pressure stage entry PN 250 Pressure stage outlet PN 100 d0 (ASME-DIN) [mm] 9.0 Response pressure: 50.00 Pressure unit: bar-g Response pressure [bar-g] 50.00 Set pressure in psi-g: 725.19 External back pressure: constant constant external pressure constant external back pressure: 17.00 cdtp calculation based on: differential pressure method/const. Differential pressure method (response pressure minus external back pressure) Cold set pressure [bar-g] 33.00 Cold Set Pressure [psi-g] 478.62 Operating temperature: 50 Temperature unit: °C - Celsius Operating temperature [°C] 50.00 Operating temperature in °F: 122 Plate, metallic / material: (L44) made of material 1.4404/ 316L Plate, soft sealing: (J23) with soft seal FKM "L"(Viton, Fluorel, Technoflon) Sealing ring material: (MB1) Sealing ring made of graphite/1.4401 Pressure screw material: (K7R) Pressure screw material: 1.4104 Spring cap material: (J99) Spring cap material 1.0619/ WCB/ WCC Spring material (X00) standard material Color scheme: (P2A) 1-layer coating system in RAL 5005 according to LID 1608.03 Decrease: (M33) Proof of testing the set pressure (TRB 513 4.2, TRD 504 3.3.4): EN 10204-3.2 (TÜV-Nord) Material quality verification for: (H01) Housing – Position 1 with material quality certificate 3.1 according to DIN EN 10204 Documentation: (H03) LESER CGA Certificate for Global Application Inspection certificate 3.1 according to DIN EN10204 TAG No., valve 1: PSV101 TAG no., valve 2: ??? Type and position of the TAG No.: (M25) Labeling with tag (foil / paper) Discharge coefficient D/G: 0.83 Coefficient of discharge F: 0.61 General information Attachment: design calculation
Compact Performance safety valve, type 459, closed spring hood, gas-tight lifting H4, for vapours, gases and liquids Weight: 5 KG / ST Commodity number: 84814010 Technical specification: Order code output, line 1: K7RMB1K4XH03L50K3IP2AJ36X00V56 Order code issue, line 2: V67L49MA2H01 E body material: 1.4104/430 1.4104 / 430 Wrong Connection Entry: (V56) External thread G 1" according to DIN ISO 228-1 Threaded outlet: (V67) Internal thread G 1 1/2" according to DIN ISO 228-1 Nominal diameter entry G 1" Nominal size outlet G 1 1/2" Pressure stage entry PN 160 Pressure stage outlet PN 40 d0 (ASME-DIN) [mm] 17.5 Response pressure: 3.70 Pressure unit: bar-g Response pressure [bar-g] 3.70 Set pressure in psi-g: 53.66 Cold set pressure [bar-g] 3.70 Cold Set Pressure [psi-g] 53.66 Operating temperature: 20 Temperature unit: °C - Celsius Operating temperature [°C] 20.00 Operating temperature in °F: 68 Plate, metallic / material: (L49) made of material: 1.4122 Sealing ring material: (MB1) Sealing ring made of graphite/1.4401 Pressure screw material: (K7R) Pressure screw material: 1.4104 Spring cap material: (J36) 0.7043 (GGG 40.3) Spring material (X00) standard material Color scheme: (P2A) 1-layer coating system in RAL 5005 according to LID 1608.03 Material quality verification for: (H01) Housing – Position 1 with material quality certificate 3.1 according to DIN EN 10204 Documentation: (H03) LESER CGA Certificate for Global Application Inspection certificate 3.1 according to DIN EN10204 Pressure setting: (L50) Valve set, but set pressure not stamped on nameplate Discharge coefficient D/G: 0.79 Coefficient of discharge F: 0.52
Leser - 4593.2524

Compact Performance safety valve, type 459, closed spring hood, gas-tight lifting H4, for vapours, gases and liquids Weight: 5 KG / ST Commodity number: 84814010 Technical specification: Order code output, line 1: K7RMB1K4XH03L50K3IP2AJ36X00V56 Order code issue, line 2: V67L49MA2H01 E body material: 1.4104/430 1.4104 / 430 Wrong Connection Entry: (V56) External thread G 1" according to DIN ISO 228-1 Threaded outlet: (V67) Internal thread G 1 1/2" according to DIN ISO 228-1 Nominal diameter entry G 1" Nominal size outlet G 1 1/2" Pressure stage entry PN 160 Pressure stage outlet PN 40 d0 (ASME-DIN) [mm] 17.5 Response pressure: 3.70 Pressure unit: bar-g Response pressure [bar-g] 3.70 Set pressure in psi-g: 53.66 Cold set pressure [bar-g] 3.70 Cold Set Pressure [psi-g] 53.66 Operating temperature: 20 Temperature unit: °C - Celsius Operating temperature [°C] 20.00 Operating temperature in °F: 68 Plate, metallic / material: (L49) made of material: 1.4122 Sealing ring material: (MB1) Sealing ring made of graphite/1.4401 Pressure screw material: (K7R) Pressure screw material: 1.4104 Spring cap material: (J36) 0.7043 (GGG 40.3) Spring material (X00) standard material Color scheme: (P2A) 1-layer coating system in RAL 5005 according to LID 1608.03 Material quality verification for: (H01) Housing – Position 1 with material quality certificate 3.1 according to DIN EN 10204 Documentation: (H03) LESER CGA Certificate for Global Application Inspection certificate 3.1 according to DIN EN10204 Pressure setting: (L50) Valve set, but set pressure not stamped on nameplate Discharge coefficient D/G: 0.79 Coefficient of discharge F: 0.52
Compact Performance safety valve, type 459, closed spring hood, gas-tight cap H2, for vapours, gases and liquids Technical specification: Order code output, line 1: K7SMB1K4ZL50I63J54X00V55V66L44 Order code output, line 2: (MA3) E-body material : 1.4404/316L 1.4404 / 316L Weighted Connection Entry: (V55) External thread G 3/4" according to DIN ISO 228-1 Threaded outlet: (V66) Internal thread G 1" according to DIN ISO 228-1 Nominal size inlet G 3/4" Nominal size outlet G 1" Pressure stage entry PN 160 Pressure stage outlet PN 100 d0 (ASME-DIN) [mm] 13.0 Response pressure: 12.38 Pressure unit: bar-g Response pressure [bar-g] 12.38 Set pressure in psi-g: 179.56 Cold set pressure [bar-g] 12.38 Cold Set Pressure [psi-g] 179.56 Operating temperature: 20 Temperature unit: °C - Celsius Operating temperature [°C] 20.00 Operating temperature in °F: 68 Plate, metallic / material: (L44) made of material 1.4404/ 316L Sealing ring material: (MB1) Sealing ring made of graphite/1.4401 Pressure screw material: (K7S) Pressure screw material: 1.4404/ 316L Spring cap material: (J54) Spring cap material 1.4408 / CF8M, cast version Spring material (X00) standard material Pressure setting: (L50) Valve set, but set pressure not stamped on nameplate Discharge coefficient D/G: 0.81 Coefficient of discharge F: 0.53 General information Like serial no. 11600360. That means without certificates, approvals and without setting the response pressure. Please check whether this is what you want.
Leser - 4594.2172

Compact Performance safety valve, type 459, closed spring hood, gas-tight cap H2, for vapours, gases and liquids Technical specification: Order code output, line 1: K7SMB1K4ZL50I63J54X00V55V66L44 Order code output, line 2: (MA3) E-body material : 1.4404/316L 1.4404 / 316L Weighted Connection Entry: (V55) External thread G 3/4" according to DIN ISO 228-1 Threaded outlet: (V66) Internal thread G 1" according to DIN ISO 228-1 Nominal size inlet G 3/4" Nominal size outlet G 1" Pressure stage entry PN 160 Pressure stage outlet PN 100 d0 (ASME-DIN) [mm] 13.0 Response pressure: 12.38 Pressure unit: bar-g Response pressure [bar-g] 12.38 Set pressure in psi-g: 179.56 Cold set pressure [bar-g] 12.38 Cold Set Pressure [psi-g] 179.56 Operating temperature: 20 Temperature unit: °C - Celsius Operating temperature [°C] 20.00 Operating temperature in °F: 68 Plate, metallic / material: (L44) made of material 1.4404/ 316L Sealing ring material: (MB1) Sealing ring made of graphite/1.4401 Pressure screw material: (K7S) Pressure screw material: 1.4404/ 316L Spring cap material: (J54) Spring cap material 1.4408 / CF8M, cast version Spring material (X00) standard material Pressure setting: (L50) Valve set, but set pressure not stamped on nameplate Discharge coefficient D/G: 0.81 Coefficient of discharge F: 0.53 General information Like serial no. 11600360. That means without certificates, approvals and without setting the response pressure. Please check whether this is what you want.
Compact Performance safety valve, type 459, closed spring hood, gas-tight cap H2, for vapours, gases and liquids Technical specification: Order code output, line 1: K7SM33MB1K4ZH03I63J54X00I31I49 Order code output, line 2: L44MA9MA3MA8MA6H01 E-body material : 1.4404/316L 1.4404 / 316L Fl.Conn.Entry: (I31) DN 25 PN 40 according to DIN EN 1092 Flow connection outlet: (I49) DN 40 PN 40 according to DIN EN 1092 Nominal size inlet DN 25 Nominal size outlet DN 40 Pressure stage entry PN 40 Pressure stage outlet PN 40 d0 (ASME-DIN) [mm] 13.0 Response pressure: 40.00 Pressure unit: bar-g Response pressure [bar-g] 40.00 Set pressure in psi-g: 580.15 Cold set pressure [bar-g] 40.00 Cold Set Pressure [psi-g] 580.15 Operating temperature: 20 Temperature unit: °C - Celsius Operating temperature [°C] 20.00 Operating temperature in °F: 68 Plate, metallic / material: (L44) made of material 1.4404/ 316L Sealing ring material: (MB1) Sealing ring made of graphite/1.4401 Pressure screw material: (K7S) Pressure screw material: 1.4404/ 316L Spring cap material: (J54) Spring cap material 1.4408 / CF8M, cast version the material (X00) standard material Decrease: (M33) Proof of testing the set pressure (TRB 513 4.2, TRD 504 3.3.4): EN 10204-3.2 (TÜV-Nord) Material quality verification for: (H01) Housing # Position 1 with material quality certificate 3.1 according to DIN EN 10204 Documentation: (H03) LESER CGA Certificate for Global Application Inspection certificate 3.1 according to DIN EN10204 Discharge coefficient D/G: 0.81 Coefficient of discharge F: 0.53
Leser - 4594.2172

Compact Performance safety valve, type 459, closed spring hood, gas-tight cap H2, for vapours, gases and liquids Technical specification: Order code output, line 1: K7SM33MB1K4ZH03I63J54X00I31I49 Order code output, line 2: L44MA9MA3MA8MA6H01 E-body material : 1.4404/316L 1.4404 / 316L Fl.Conn.Entry: (I31) DN 25 PN 40 according to DIN EN 1092 Flow connection outlet: (I49) DN 40 PN 40 according to DIN EN 1092 Nominal size inlet DN 25 Nominal size outlet DN 40 Pressure stage entry PN 40 Pressure stage outlet PN 40 d0 (ASME-DIN) [mm] 13.0 Response pressure: 40.00 Pressure unit: bar-g Response pressure [bar-g] 40.00 Set pressure in psi-g: 580.15 Cold set pressure [bar-g] 40.00 Cold Set Pressure [psi-g] 580.15 Operating temperature: 20 Temperature unit: °C - Celsius Operating temperature [°C] 20.00 Operating temperature in °F: 68 Plate, metallic / material: (L44) made of material 1.4404/ 316L Sealing ring material: (MB1) Sealing ring made of graphite/1.4401 Pressure screw material: (K7S) Pressure screw material: 1.4404/ 316L Spring cap material: (J54) Spring cap material 1.4408 / CF8M, cast version the material (X00) standard material Decrease: (M33) Proof of testing the set pressure (TRB 513 4.2, TRD 504 3.3.4): EN 10204-3.2 (TÜV-Nord) Material quality verification for: (H01) Housing # Position 1 with material quality certificate 3.1 according to DIN EN 10204 Documentation: (H03) LESER CGA Certificate for Global Application Inspection certificate 3.1 according to DIN EN10204 Discharge coefficient D/G: 0.81 Coefficient of discharge F: 0.53